anleitung fÜr einbau, bedienung und wartung kesse l ...€¦ · kesse l- badablauf „der...
Post on 19-Oct-2020
0 Views
Preview:
TRANSCRIPT
-
ANLEITUNG FÜR EINBAU, BEDIENUNG UND WARTUNG
KESSEL-Badablauf „Der Unsichtbare“mit den Grundkörpern:Classic, Der Superflache
Produktvorteile
Änderungsstand: 10/2013Sachnummer: 084-114
Dehnfuge zwischen Endbelag und Aufsatzstück legen.
� Aufsatzstück mit befliesbarerAbdeckung für die individuelleBadgestaltung
� Drehbares und um 50 mmstufenlos höhenverstellbaresAufsatzstück
� Optimale Rohrreinigungdurch Herausnehmendes Geruchverschlusses
� Geruchverschluss selbstreinigend� mit fixierter Lippendichtung für
den sicheren Einbau
084-114_2012_10_DE_EN_Bodenablauf_084-114 Bodenabl 09/07 17.10.13 10:49 Seite 1
-
� �
�
A
ProduktbeschreibungAblaufgrundkörper:• Classic DIN 50/70
• Der Superflache
Befliesbare Abdeckung
084-114_2012_10_DE_EN_Bodenablauf_084-114 Bodenabl 09/07 17.10.13 10:49 Seite 2
-
� KESSEL-Bodenablauf aus Kunststoff � Zwischenstück mit Klebeflansch� Geruchverschluss � und Gegenflansch
� Systemzubehör für erweiterte Einbaumöglichkeiten siehe Rückseite.
Einbauvorschlag
Abb. zeigt Best.Nr. 40150.20 + 27199
084-114_2012_10_DE_EN_Bodenablauf_084-114 Bodenabl 09/07 17.10.13 10:49 Seite 3
-
Sc
Bei vertieftem Einbau Verlängerungsstück Best. Nr. 27146 zwischen Grundkörper undAufsatzstück anbringen.Systemzubehör für erweiterte Einbaumöglichkeiten siehe Rückseite.
Nach Abnehmen des Rostes und Her aus -neh men des Geruchverschlusses durchKip pen ist eine optimale Rohrreinigungmöglich.
Aufsatzstück drehbar,stufenlos höhenverstellbarohne Absägen
Flexibler Niveauausgleichzwischen Aufsatzstückund Grundkörper
Minimale Einbauhöhedurch Absägen
Einbau- und Montagetipps
Reinigung
084-114_2012_10_DE_EN_Bodenablauf_084-114 Bodenabl 09/07 17.10.13 10:49 Seite 4
-
F
Rückstauverschlüsse R Hebeanlagen
Abläufe / Rinnen Abscheider Kleinkläranlagen
� Grundkörper aus ABS 40150DN 50, Auslauf seitlichmit Geruchverschluss
� Geruchverschluss aus PP 4720050 mm Sperrwasserhöhe
� Geruchverschluss aus ABS 4710025 mm Sperrwasserhöhe
� Verlängerungsstück aus ABS 27146mit Lippendichtung
� Klebeflansch aus ABSfür Classic Grundkörper 43401für Practicus Grundkörper 43400
� Abdichtungsbahn 43710aus PVC 500 x 500 mm
� Abdichtungsbahn 43730aus EPDM 500 x 500 mm
� Zwischenstück aus ABS 27199mit Klebeflansch und GegenflanschFlanschbreite 100 mm
� Zwischenstück aus PP 27198mit Pressdichtungsflansch ausEdelstahl, Flanschbreite 63 mm
� Haltering aus HDPE 27167zur Sickerwasserableitung
Aufsatzstück aus ABS 27165mit Schlitzrost 100 x 100 mmaus Edelstahl
Aufsatzstück aus ABS 27193mit Schlitzrost 150 x 150 mmaus ABS
� Aufsatzstück aus ABS 27191mit Schlitzrost 150 x 150 mmaus Edelstahl verschraubt
� Lippendichtung 27148für Zwischenstücke
Variofix-Dünnbettaufsatz 47901aus ABS mit Schlitzrost100 x 100 mm aus Edelstahl
� Variofix-Dünnbettaufsatz 47902aus ABS mit Schlitzrost150 x 150 mm aus Edelstahl
Schemadarstellung des kompletten Baukastensystems.
Systemzubehör
Die KESSEL-Boden-/Bad- und Deckenablauf-Grundkörper und Auf satz -stücke aus Kunststoff sind mit denen aus Edelstahl Größe 1 kombinier-bar. Bitte richten Sie Ihre Anfrage an unseren Verkauf.
nd
084-114_2012_10_DE_EN_Bodenablauf_084-114 Bodenabl 09/07 17.10.13 10:49 Seite 5
-
Führend in Entwässerung
Privater Wohnungsbauohne Kanalanbindung
1 2 3 4 5
Öffentlicher Bauz.B. Freizeitanlagen
6 4
Privater WohnungsbauEin- und Mehrfamilienhaus
Gewerblicher Bauz.B. Tankstellen
Gewerblicher Bauz.B. Hotel
Öffentlicher Bauz.B. Krankenhaus
4 5
Gewerblicher Bauz.B. Industriebau
1 Rückstauverschlüsse 2 Rückstauhebeanlagen 3 Hebeanlagen
4 Abläufe / Rinnen 5 Abscheider 6 Kleinkläranlagen
1 2 3 4 5
1 2 3 4 5
1 2 3 4
2 3 5
8
5
3
8
2
084-114_2012_10_DE_EN_Bodenablauf_084-114 Bodenabl 09/07 17.10.13 10:49 Seite 6
-
INSTRUCTIONS FOR INSTALLATION, OPERATION AND MAINTENANCE
KESSEL-Bathroomdrain „The Invisible“with the basic bodies:Classic, Superflat
Product advantages
Edition: 10/2013Number: 084-114EN
Place expansion joint between endcover and attachment piece.
� Top section with tileable coverfor individual bathroom
� Attachment piece can be turnedand continuously height-adjusted by up to 50 mm
� Optimum pipe cleaning by removal of odour trap
� Self-cleaning odour trap� Low installation height � With fixed lip seal for safe
installation
084-114_2012_10_DE_EN_Bodenablauf_084-114 Bodenabl 09/07 17.10.13 10:49 Seite 7
-
Product descriptionDrain body:• Classic DIN 50/70
• The Superflat
Tileable cover
E
� �
�
I
084-114_2012_10_DE_EN_Bodenablauf_084-114 Bodenabl 09/07 17.10.13 10:49 Seite 8
-
� KESSEL floor drain, plastic � Connection flange� Odour trap and counterflange �
� See next page for system accessories for additional installation possibilities.
Assembly proposal
Illustration shows 46700.20 + 27199
Expansion joint
Polyethylene moisturebarrier
SlopeSlope
1.5 cm Tiles
Screed (3 cm)
Thermal/Sound insulation4 cm Screed
Concrete floor
Polyethylene moisture membrane Dimensions in cm
084-114_2012_10_DE_EN_Bodenablauf_084-114 Bodenabl 09/07 17.10.13 10:49 Seite 9
-
Sc
During initial operation, make sure that the odour trap is completely filled with water. Please checkthe water level at regular intervals to avoid odour pollution!
Optimal pipe cleaning is possible by taking thecover off and removing the odour trap by tilting.When the odour trap is replaced, it must becompletely filled with water.
Attachment piece can be tur-ned and continuously height-adjusted
Flexible level adjustment between attachment pieceand drain body
Minimum installation height by sawing the attachment piece as required
Assembly tips
Cleaning
084-114_2012_10_DE_EN_Bodenablauf_084-114 Bodenabl 09/07 17.10.13 10:49 Seite 10
-
� Drain body made of ABS 40150DN 50, vertical dischargewith odour trap
� Odour trap made of PP 4720050 mm trap height
� Odour trap made of ABS 4710025 mm trap height
� Extension made of ABS 27146with lip seal
� Adhesive flange made of ABS for Classic Drainbody 43401for Practicus Drainbody 43400
� PVC sealing sheet 43710500 x 500 mm
� EPDM sealing sheet 43730500 x 500 mm
� ABS adapter 27199with adhesive flange and counterflange,flange width 100 mm
� PP adapter 27198with pressure sealing flange made ofstainless steel, flange width 63 mm
� Supporting ring made of HDPE 27167for discharging seepage water
Attachment piece made of ABS 27193with slotted cover, 150 x 150 mm ABS
Attachment piece made of ABS 27191with slotted cover, 150 x 150 mm made ofstainless steel, screwed in place
� Attachment piece made of PA 27192with clamping edge and white slottedcover Ø 120 mm made of plastic
� Variofix shallow bed attachment 47901ABS, with slotted cover, 100 x 100 mm
Variofix shallow bed attachment 47902ABS, with slotted cover, 150 x 150 mm
Schematic representation of the whole modular system.
System accessories
The KESSEL floor/bathroom and roof drains bodies and attachment pieces made of plastic can be combined with those madeof stainless steel size 1. Please send your inquiry to our Sales department.
ck
L
Backwater valves Lifting stations
Lifting stations Separators Septic Systems
084-114_2012_10_DE_EN_Bodenablauf_084-114 Bodenabl 09/07 17.10.13 10:49 Seite 11
-
8
7
3
1
f
2
2
Leading in Drainage
Private homes withoutpublic sewage connection
1 2 3 4 5
Public buildings(e.g. leisure facility)
6 4
Private homes/multifamilyapartments/flats
Commercial buildings(e.g. gas/petrol station)
Commercial buildings(e.g. hotel)
Public buildings(e.g. hospital)
4 5
Commercial buildings(e.g. industrial / manu-facturing facilities)
1 Backwater valves 2 Wastewater Lifting system 3 Lifting stations
3 Lifting stations 5 Separators 6 Septic Systems
1 2 3 4 5
1 2 3 4 5
1 2 3 4
2 3 5
084-114_2012_10_DE_EN_Bodenablauf_084-114 Bodenabl 09/07 17.10.13 10:49 Seite 12
top related