bauer bg 42 - borama-rent.de · bauer bg 42 großdrehbohrgerät rotary drilling rig geräteträger...
Post on 20-Mar-2020
5 Views
Preview:
TRANSCRIPT
BAUER BG 42GroßdrehbohrgerätRotary Drilling Rig
Geräteträger BS 115Base Carrier BS 115
Pre
miu
mL
ine
905-689-1_3-13_BG42_BS115.qxd 15.03.2013 19:38 Uhr Seite 1
BG 42
BG 42 PremiumLine (BS 115) © BAUER Maschinen GmbH, 3/2013
BAUER BG PremiumLine stehtfür Multifunktionsgeräte fürverschiedenste Anwendungendes Spezialtiefbaus und fürden Anspruch ein Höchstmaßan Kundenzufriedenheit zugewährleisten durch:
• Qualität• Wirtschaftlichkeit und
Leistungsfähigkeit• Einfacher Transport und
Geräteaufbau• Servicefreundlichkeit• Hoher Sicherheitsstandard• Umweltverträglichkeit
(z.B. Dieselpartikelfilter bei TIER 4i)
• Lange Lebensdauer undhervorragenderWiederverkaufswert
BAUER BG PremiumLinestands for multi-purposedrilling rigs for variousapplications of foundationworks and for the goal ofreaching and maintaining anoptimal level of CustomerSatisfaction by ensuring:
• Quality• Economic efficiency and
performance• Ease of transportation and
rigging• Service friendliness• Highest safety levels• Environmental awareness
(e.g. particulate filter with TIER 4i)
• Long life expectancy andoutstanding resale values
Die BG 42 PremiumLine ist einBohrgerät mit besonderen Vorzügen:
Neuer verstärkter Mast
Neuer „Vario-Mastkopf“– Ein Mastkopf für Bohrachsabstand
1.300 / 1.550 mm– Mehr Hub für Kellystangen mit oberer
Kellyführung – Optimierte Transporthöhe und optimale
Position des Hilfsseiles bei jedermöglichen Bohrachse durch klappbarenSeitenausleger am Mastkopf
Neues variablesVorschubwindensystem vermeidet den Abbau des Vorschubseileszum Transport (Kellybetrieb)
Special features of the BG 42 PremiumLine :
New, reinforced mast structure
New “Vario-Masthead”– One type of masthead for drilling axes
1.300 / 1.550 mm– Increased stroke length for Kelly bars
with upper kellyguide – Optimized transport height and position
of auxiliary rope at any drilling axis dueto tiltable side outrigger of mast head
New variable crowd winch conceptavoids removing of crowd winch rope fortransport (in Kelly mode)
Moderne, ergonomische Fahrerkabine– mit Klimaanlage, Schiebetür und
optimalem Überblick– Neues B-Tronic Control System mit
großem Touch Screen fürBedienkomfort und Sicherheit
– DTR Modul zur Übertragung vonGeräte- und Prozessdaten
Modern, ergonomic cab– With air-conditioning system, sliding
door and optimal overview– New B-Tronic control system with big
Touch Screen for enhanced operatingcomfort and safety
– DTR module for remote transfer ofequipment and process data
905-689-1_3-13_BG42_BS115.qxd 15.03.2013 19:38 Uhr Seite 2
BG 42 PremiumLine (BS 115)© BAUER Maschinen GmbH, 3/2013
Main winch mounted on rear of uppercarriage– Swing down mechanism for transport– Wide winch drum (more rope length capacity for 2nd layer)– Service-friendly position (for good accessibility and ease of
change)– Optimal transformation of hydraulic power into line pull and
rope speed– Designed for continuous and heavy-duty operation
(winch class M6 / L3 / T5)
Powerful engine CAT C 18 with 563 kW (TIER 4i) as option
Precise electric pre-control system
Variably stackable counterweight elements (up to a totalweight of 40,0 t)– Constant swing radius– Small weight of individual elements (5,0 t)– Flexible arrangement (adjusted to application)
Hauptwinde am Oberwagen (Huckepackwinde)– Abklappbar für Transport– Breite Windentrommel (mehr Seilkapazität in der 2. Lage)– Servicefreundliche Position (gut zugänglich und leicht
austauschbar)– Optimale Umsetzung der hydraulischen Leistung in
Windenzugkraft und Geschwindigkeit– Auslegung für schweren Dauerbetrieb
(Windenklasse M6 / L3 / T5)
Leistungsstarker CAT C 18 Motor mit 563 kW (Stage III B) als Option
Präzise elektrische Vorsteuerung
Variabel stapelbare Gegengewichtsscheiben (bis zu 40,0 t)– Konstanter Heckradius– Geringes Einzelgewicht (5,0 t)– Flexible Anordnung für verschiedene Anwendungen
New Health and Safety features– Safety rails upper level– Walkway lower level– Upward-folding hinged service doors– Video cameras for reverse movement
control– Improved working safety when
mounting and demounting of stackablecounterweight elements
Neue Sicherheitsausrüstungen– Absturzsicherung am Oberwagen– Begehungen auf Oberwagenebene– Nach oben faltbare Serviceklappen– Rückfahrkameras– Verbesserte Arbeitssicherheit bei
Montage und Demontage derstapelbaren Gegengewichte
905-689-1_3-13_BG42_BS115.qxd 15.03.2013 19:39 Uhr Seite 3
Abmessungen Dimensions
BG 42 PremiumLine (BS 115) © BAUER Maschinen GmbH, 3/2013
30590
28040
13660
12790
11480
10580
2960
0
1000
0
5190
780
1300
64605310
4550 - 4850
Hub
/ S
troke
107
00
4000
1070
0
1300
Kel
ly B
K 4
20/4
70/3
/36
(A=1
5250
mm
)
905-689-1_3-13_BG42_BS115.qxd 15.03.2013 19:39 Uhr Seite 4
Technische Daten Technical data
BG 42 PremiumLine (BS 115)© BAUER Maschinen GmbH, 3/2013
Gesamthöhe Overall height 30,3 m
Einsatzgewicht (ca.) Operating weight (approx.) (mit Kelly BK 420/470/3/36) (with Kelly BK 420/470/3/36) 164 t
Drehantrieb Rotary drive KDK 420 S
Drehmoment (nominal) bei 350 bar Torque (nominal) at 350 bar 420 kNm
Max. Drehzahl Max. speed of rotation 39 rpm
Windenvorschub Crowd winch
Druckkraft / Zugkraft (effektiv) Crowd force push / pull (effective) 460 / 460 kN
Hub (Kellysystem) Stroke (kelly system) 10.700 mm
Max. Schlittenhub Max. stroke of sledge 20.700 mm
Hauptwinde (Windenklasse) Main winch (winch classification) M6 / L3 / T5
Zugkraft (1. Lage) effektiv / nominal Line pull (1st layer) effective / nominal 290 / 368 kN
Hilfswinde (Windenklasse) Auxiliary winch (winch classification) M6 / L3 / T5
Zugkraft (1. Lage) effektiv / nominal Line pull (1st layer) effective / nominal 140 / 179 kN
Mastneigung (nach hinten / vorne / quer) Mast inclination (backward / forward / lateral) 15° / 5° / 3°
Geräteträger Base carrier BS 115
Motor Engine CAT C 18
Nennleistung ISO 3046-1 Rated output ISO 3046-1 570 kW@1.800 U/min
Motor spezifiziert nach Abgasnorm Engine conforms to exhaust emission standard EPA/CARB TIER 2
Dieseltank Diesel tank capacity 1.300 l
Hydrauliksystem Hydraulic systemHydraulische Leistung Hydraulic power output (gemessen am Verteilerblock KDK) (measured at inlet to rotary drive) 460 kW
Hydraulikdruck Hydraulic pressure 350 bar
Tankinhalt Hydraulic oil tank capacity 1.200 l
Unterwagen UndercarriageLaufwerksklasse Crawler type B 8 B
3-Steg Bodenplatten Width of triple grouser track shoes 1.000 mm
Fahrwerkslänge Overall length of crawler 6.460 mm
Bohrdaten Drilling dataBohrdurchmesser bei Bohrachse 1.300 mm Drilling diameter for drill axis 1.300 mmunverrohrt / verrohrt uncased / cased 2.300 / 2.000 mm
Bohrdurchmesser bei Bohrachse 1.550 mm Drilling diameter for drill axis 1.550 mmunverrohrt / verrohrt uncased / cased 2.800 / 2.500 mm
Bohrtiefen Drilling depthsBK 420/470/3/36 BK 420/470/3/36 35,40 m
BK 420/470/4/76 BK 420/470/4/76 74,90 m
905-689-1_3-13_BG42_BS115.qxd 15.03.2013 19:39 Uhr Seite 5
Ausstattung Equipment
BG 42 PremiumLine (BS 115) © BAUER Maschinen GmbH, 3/2013
Serienausstattung Standard equipment
• Drehgetriebe KDK 420 S (Schaltgetriebe)• Hauptwinde mit hydraulischer Freilaufsteuerung• Haupt- und Hilfswinde mit Spezialrillung• Hubendschalter für Haupt- und Hilfswinde• Wirbel für Hauptseil• Vorschub schnell / langsam• Schwenkbarer Anschlagpunkt für Haupt- und Hilfsseil• Absturzsicherung Oberwagen• Begehung auf Oberwagenebene• Hauptwinde zum Transport abklappbar• Mastverlängerung 4,0 m
• Rotary drive KDK 420 S (multi geared)• Main winch with hydraulically operated freewheeling• Main and auxiliary winch with special grooving• Hoist limit switch on main and auxiliary winches• Swivel for main rope• Crowd in fast or slow mode• Pivoted anchor points for main and auxiliary ropes• Safety rails upper level• Walkway lower level• Main winch with swing down mechanism for transport • Mast extension 4,0 m
Zusatzausstattung Optional equipment
• Drehmomentwandler (für Kellybetrieb) 600 kNm• Motor CAT C 18 (Stage III B) 563 kW@1.800 U/min• Hauptwinde 350 kN (effektiv)• Verrohrungsmaschinenanbau BV 2000• Bohrachserweiterung (Kellybetrieb) 1.550 mm• Mastverlängerung 2,5 m• Unterwagen UW 160• Verbreiterte Begehung auf Oberwagenebene mit
Geländer• Mastabstützung
• Torque multiplier kelly technique 600 kNm• Engine CAT C 18 (TIER 4i) 563 kW@1.800 U/min• Main winch 350 kN (effective)• Oscillator attachment BV 2000• Extension of drill axis (Kelly mode) 1.550 mm• Mast extension 2,5 m• Unterwagen UW 160• Working at height package with rails• Mast support unit
Mess- und Steuerungstechnik• SPS Rechner für alle elektrisch angesteuerten Funktionen• B-TRONIC 4.1: elektronisches Steuerungs-, Kontroll- und
Visualisierungssystem• Anzeige von Fehlermeldungen in Klartext• Fernübertragung der Betriebsdaten (DTR Modul)• Schockiereinrichtung für KDK• Notsteuerung Bohrgerät (Kernfunktionen)• Mastneigungsmessung in x/y Richtung (Anzeige digital/ analog) • Mastautomatik (automatische Vertikalstellung)• Hauptwinde mit elektronischer Seilkraftmessung• Hilfswinde mit hydraulischer Seilkraftmessung• Tiefenmessung Hauptwinde• Tiefenmessung Vorschub• Funktion „Wirbel aufstellen“ Hauptwinde• Drehzahlmessung KDK• Schlappseilabschaltung Hauptwinde• Anpresskraft-Einstellung• Tablet-PC
Measuring and control equipment• PLC processor for all electrically actuated functions• B-TRONIC 4.1: Electronic monitoring -, control -, and
visualization system• Display of fault messages as plain text• Remote transmission of process and operating data (DTR module)• Uni-directional impact function on KDK (for auger discharge)• Emergency mode of operation for drilling rig (core functions)• Mast inclination measurement on x/y axes (digital/analog display) • Automatic vertical alignment of mast• Electronic load sensing on main rope• Hydraulic load sensing on auxiliary rope• Depth measuring device on main winch• Depth measuring device (on crowd winch system)• Swivel alignment function on main winch• Speed measuring device on KDK• Rope slack prevention on main winch• Crowd pressure setting• Tablet-PC
905-689-1_3-13_BG42_BS115.qxd 15.03.2013 19:39 Uhr Seite 6
Transportdaten Transport data
BG 42 PremiumLine (BS 115)© BAUER Maschinen GmbH, 3/2013
G = 3 x 0,3 tB = 1250 mmG = 3 x 0,3 tB = 1250 mm
G = 42,1 tB = 3600mm
G = 42,1 tB = 3600mm
G = 14,7 tG = 14,7 t G = 15,2 tG = 15,2 t
G = 28,5 tB = 2450 mm
G = 28,5 tB = 2450 mm
G = 3,5 tB = 1100 mm
G = 3,5 tB = 1100 mm
G = 10,5 tB = 1840 mm
G = 10,5 tB = 1840 mm
35 t Winde35 t Winde
G = 6 x 5 tB = 3450 mm
G = 6 x 5 tB = 3450 mm
G = 69,5 tB = 3700 mm
G = 69,5 tB = 3700 mm
G = 105,2 tB = 3700 mmG = 105,2 t
B = 3700 mm
G = 6,2 tB = 2000 mm
G = 6,2 tB = 2000 mm
42804280
1700
1700
10001000 27502750598059801323013230
1921019210
64606460
1830183064606460
64606460 28302830 29102910
11001100 450
450 21502150
84308430
33703370140140
1103011030
2570
2570
370
370
3600
3600
2700
2700
260
260
3590
3590
1100
1100
1970197027
0027
00
1310
1310
1310
1310
50605060
3600
3600
33803380
870
870
440
440
2860286020002000 3560356050605060
8430843012
7012
70
3120
3120
12501250
1500
1500
37001000
G = 8,2 tB = 2000 mm
G = 8,2 tB = 2000 mm
1421014210400
400
2610
2610
1140
1140
Gewichtsangaben sind ca. Werte, Zusatzausrüstungen (Optionen)können das Gesamtgewicht verändern.
Weights shown are approximate values; optional equipment maychange the overall weight.
G = Gewicht / Weight, B = Breite / Width
905-689-1_3-13_BG42_BS115.qxd 15.03.2013 19:39 Uhr Seite 7
SOB – Bohrverfahren
CFA – Drilling system
CCFA
Konstruktionsentwicklungen und Prozessverbesserungen könnenAktualisierungen und Änderungen von Spezifikation und Materialienohne vorherige Ankündigung oder Haftung erforderlich machen. Die Abbildungen enthalten möglicherweise optionale Ausstattungund zeigen nicht alle möglichen Konfigurationen. Diese Angaben und die technischen Daten haben ausschließlichInformationscharakter. Irrtum und Druckfehler vorbehalten.
Design developments and process improvements may require thespecification and materials to be updated and changed withoutprior notice or liability. Illustrations may include optional equipmentand not show all possible configurations. These and the technical data are provided as indicative informationonly, with any errors and misprints reserved.
905.689.1 3/2013
Anwendungen Applications
BAUER Maschinen GmbHBAUER-Straße 1D-86529 SchrobenhausenTel. +49 (0)82 52/97-0Fax +49 (0)82 52/97-1135e-mail: BMA@bauer.dewww.bauer.de
Weitere Anwendungsmöglichkeiten VDW, FDP, CSM, BC Fräsenanbau (auf Anfrage)Further applications VDW, FDP, CSM, BC Cutter attachment (on request)
32760
0
1000
0
5190
350
1300
4550
4000
1070
0
1300
2274022740
2530025300
6000
6000
Sch
litte
nhub
/ S
troke
of s
ledg
e 19
750
mm
Sch
litte
nhub
/ S
troke
of s
ledg
e 19
750
mm
Sch
neck
enlä
nge
/ Aug
er le
ngth
223
90 m
mS
chne
cken
läng
e / A
uger
leng
th 2
2390
mm
31000
0650
5190
1300
4550
1300
2180021800
Sch
litte
nhub
/ S
troke
of s
ledg
e 20
700
mm
Sch
litte
nhub
/ S
troke
of s
ledg
e 20
700
mm
DKS 150/300DKS 150/300
905-689-1_3-13_BG42_BS115.qxd 15.03.2013 19:39 Uhr Seite 8
top related