deutsche akkreditierungsstelle gmbh · deutsche akkreditierungsstelle deutsche...
Post on 07-Aug-2018
239 Views
Preview:
TRANSCRIPT
cDAkkSDeutscheAkkreditierungsstelle
Deutsche Akkreditierungsstelle GmbH
Annex to the Accreditation Certificate D-PL-11086-01-00
according to DIN EN ISO/IEC 17025:2005
period ofvalidity: 05.08.2015 to 04.08.2020
Certificate Holder:
Dateofissue: 05.08.2015
IFO - Institut für Oberflächentechnik GmbH
Alexander-von-Humboldt-Straße 19, 73529 Schwäbisch Gmünd
Tests in the fields:
Testing of coatings or metal and plastic surfaces against corrosion, climatic or environmentalimpact and other contamination factors;
Corrosion analyses, including chemicat, physico-chemical tests on metallic and non-metalliccoatings and structural elements äs well äs metallic and plastic surfaces and coatings;
Testing of mechanical properties of coatings;
Testing of performance properties of coatings with selected non-destructive testing
Abbreviations used : please referto the last page
The testing laboratory is permitted, without being required to inform and obtain prior approvalfrom DAkkS, to use Standards or equivalent testing methods listed here with different issue dates.
This document is a translation. The definitive version is the original German annex to the accreditation certificate. 1/8
cAnnex to accredltation certificate D-PL-11086-01-00
DAkkSDeutscheAkkreditierungsstelle
l. Chemical and physico tests testing on coatings and corrossion
DINEN ISO 36132011-04
DIN EN 152052007-02
HausmethodeOB
2009-11
DIN EN ISO 105232012-04
Metallic and other inorganic coatings - Chromate conversioncoatings on zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys - Test methods
Determination of hexavalent chromium in corrosion protectionlayers - Qualitative analysis (withdrawn Standard)
Residual soiling for particle greater 150 \i m in metalliccomponents
Determination of pH
DIN 38404-41976-12
Determination ofTemperature (C 4)
DIN EN 278881993-11
Water quality; determination of electrical conductivity
DIN EN 12373-41999-04
ISO 21432010-07DIN EN ISO 21432010-12
Aluminium and aluminium alloys - Anodizing - Part 4: Estimation ofloss of absorptive power of anodic oxidation coatings after sealingby dye Spot test with prior acid treatment (withdrawn Standard)
Anodizing of aluminium and its alloys - Estimation of loss ofabsorptive power of anodic oxidation coatings after sealing - Dye-Spot test with prior acid treatment
DIN EN 12373-72002-11
DIN EN ISO 32102010-12
Aluminium and aluminium alloys - Anodizing - Part 7: Assessmentof quality of sealed anodic oxidation coatings by measurement ofthe loss of mass after immersion in phosphoric acid/chromic acidsolution with prior acid treatment (withdrawn Standard)
Anodizing of aluminium and its alloys - Assessment of quality ofsealed anodic oxidation coatings by measurement of the loss ofmass after immersion in phosphoric acid/chromic acid solution
Perlod ofvalidity: 05.08.2015 to 04.08.2020Date of issue: 05.08.2015
-Transtation - 2/8
cAnnextoaccreditation certificate D-PL-11086-01-00
DAkkSDeutscheAkkreditierungsstelle
2. Testing of mechanical properties of coatings
2.1 Mechanical properties in air
2.1.1 mechanical and physical testing of deformation behaviour and failure limits ofaluminium and steel coatings in air
DIN EN ISO 15192011-04
Paints and varnishes - Bend test (cylindrical mandrel)
DIN EN ISO 15202002-04
Paints and varnishes - Cupping test (withdrawn Standard)
DIN EN ISO 15202007-11
Paints and varnishes - Cupping test
DIN EN ISO 24091994-10
Paints and varnishes - Cross-cut test (withdrawn Standard)
DIN EN ISO 24092013-06
Paints and varnishes - Cross-cut test
DIN EN ISO 6272-22011-11
DIN EN ISO 28152003-10
Paints and varnishes - Rapid-deformation (impact resistance)tests - Part 2: Falling-weight test, small-area indenter
Paints and varnishes - Buchholz indentation test
RAL-GZ 6322011-08
Applicable test guidelineClause 1-3.2
Cleaning and protection - Fa^ade and monument - Qualityassurance
ASTM D 27942010
BS 6161Part 181991-12
Standard Test Method for Resistance of Organic Coatings to theEffects of Rapid Deformation (Impact)
Methods of test for anodic oxidation coatings on aluminium andits alloys. Determination ofsurface abrasion resistance
GSBAL6312013-05Part VII Clause 10
International high-class directive for the component coating ofaluminium - behaviour compared with drilling and milling
Period ofvalidity: 05.08.2015 to 04.08.2020Date of issue: 05.08.2015
-Translation - 3/8
Annex to accreditation certiflcate D-PL-11086-01-00
DAkkSDeutscheAkkreditierungsstelle
Qualicoat
2015-01Clause 2.18
Sawing, milling and drilling / regulation for determining theadhesion strength of an organic coating during mechanicalprocessing
2.2. Mechanical properties in media
2.2.1 mechanical testing of properties
GSB ST 6632013-05Part VII Clause 8.2
Crosslinking test / polymerization test / wiping testInternational quality guideline for component coatings made ofsteel
GSBAL6312013-05Part VII Clause 8.2
Cross-linking test / Polymerization lest / Wiping testInternational quality guideline for component coatings made ofaluminium
QIB2013-03Clause2.10
Cross-linking test - Test for the determination of the degree ofcuring of liquid paints
Qualicoat
2015-01Clause2.14
Cross-linkingtest
GSBAL6312013-05PartVIICIauselS
Resistance to boiling water / Cooking testInternational quality guideline for the component coating made ofaluminium
QIB 2013-03Clause 2.12
Cooking test to check the pre-treatment
Qualicoat
2015-01Clause2.16
Resistance to boiling water / cooking test
Period ofvalidity: OS.08.2015 to 04.08.2020Dateofissue: 05.08.2015
- Translation - 4/8
Annex to accreditation certificate D-PL-11086-01-00
[(.DAkkSDeutscheAkkreditierungsstelle
2.2.2 Testing of optical properties /colour fastness
DI N 11664-42012-06
Colorimetry - Part 4: CIE 1976 L*a*b* Colour space
DINEN ISO 28132015-02
Reflectometer äs a means for gloss assessment of plane surfaces ofpaint coatings and plastics
DINEN ISO 28131999-06
ISO 7724-21984-10
Paints and varnishes - Determination of specular gloss of non-metallic paint films at 20°, 60° and 85" (withdrawn Standard)
Paints and varnishes; Colorimetry; Part 2 : Colour measurement(withdrawn Standard)
2.3. Testing of media resistance due to aging, climatic and environmental impact äs well äsother contamination factors on laminated aluminium and steel and galvanic coatings
DINEN ISO 6270-22005-09
DIN 500171982-10
Paints and varnishes - Determination of resistance to humidityPart 2: Procedure for exposing test specimens in condensation-wateratmospheres
Condensation water test atmospheres (withdrawn Standard)
DINEN ISO 92272012-09
Corrosion tests in artificial atmospheres - Salt spray tests
DIN 500211988-06
Spray tests with different sodium chloride solutions (withdrawnStandard)
DIN EN ISO 6988
1997-03
Metallic and other non-organic coatings - Sulphur dioxide test withgeneral condensation of moisture
DINEN ISO 3231
1998-02
Paints and varnishes - Determination of resistance to humid
atmospheres containing sulphur dioxide
DIN 50018
2013-05
Testing in a saturated atmosphere in the presence ofsulphurdioxide
DIN EN ISO 72532002-04
Paints and varnishes - Determination of resistance to neutral salt
spray (fog) (withdrawn Standard)
Period ofvalidity: 05.08.2015 to 04.08.2020Date of issue: 05.08.2015
-Translation- 5/8
.<^DAkkS
Annex to accred itation certificate D-PL-11086-01-00
DeutscheAkkreditierungsstelle
RAL-GZ 6322011-08
Applicable test guidelineClause 1-3.4
Cleaning of metal facades- alternative immersion test (Testing ofcleaning agents for cleaning metal facades)
RAL-GZ 6322011-08
Applicable test guidelineClause 1-3.5
Cleaning of metal facades - cotton ball test (Testing of cleaningagents for cleaning metal facades)
RAL-GZ 6322011-08
Applicable test guidelineClause 1-3.3
Cleaning of metal facades - immersion test (Testing of cleaningagents for cleaning metal facades)
GSBAL6312013-05PartVIICIauselS
International quality guideline for component coating made ofaluminium - resistance to mortar
GSB ST 6632013-05PartVIICIauselS
International quality guideline for component coatings made ofsteel - resistance to mortar
QIB2013-03Clause2.11
Resistance to mortar
Qualicoat
2013-05Clause 2.15
Resistance to mortar
DIN EN ISO 105-B022014-11
DIN EN ISO 16474-22013-03
QIB2013-03Clause2.9
Tests for colour fastness - Part B02: Colour fastness to artificial
light: Xenon arc fading lamp test
Paints and varnishes - Methods of exposure to laboratory lightsources - Part 2: Xenon-arc lamps
Machu test (short-term corrosion test for aluminium, steel andgalvanized steel)
Qualicoat
2015-01Clause2.11
Machu test (short-term corrosion lest, only on profile pieces)
Period ofvalidity: 05.08.2015 to 04.08.2020Date of issue: 05.08.2015
-Translation - 6/8
.^=^DAkkS
Annex to accreditation certificate D-PL-11086-01-00
DeutscheAkkredltierungsstelle
DINEN ISO 29312010-12
ISO 29312010-07
Anodizing of aluminium and its alloys - Assessment of quality ofsealed anodic oxidation coatings by measurement of admittance
Anodizing of aluminium and its alloys - Assessment of quality ofsealed anodic oxidation coatings by measurement of admittance
Caterpillar Specifications1E2732 (2010-01)1E4093 (2012-12)
Laboratory Cyclic Corrosion Test according to SÄE J 2334 (2003-12)- resistance against fluids (MG1004-151)
3. Testing of performance properties of coatings or metallic, plastic surfaces with selectednon-destructive testing
ISO 21772003-03
Hausmethode 02
2008-07
Metallic coatings - Measurement of coating thickness - Coulometricmethod by anodic dissolution
Materialography - General Joint Preparation / Coating ThicknessDetermination
DINEN ISO 21781995-04
DIN EN ISO 23602004-04
Hausmethode 01
2004-12
Non-magnetic coatings an magnetic Substrates - Measurement ofcoating thickness - Magnetic method (withdrawn Standard)
Non-conductive coatings on non-magnetic electrically conductivebasis materials - Measurement of coating thickness - Amplitude-sensitive eddy current method
Conductance measurement: The process is used to differentiatealuminium alloys by different conductivities
Abbreviations used:
ASTM American SocietyforTesting and MaterialsBS British Standard
Caterpillar Published test guidance on coatings of U.S. American Company Caterpillar Inc.Specifications Manufacturerofconstruction machineryDIN German Institut ofstandardisation
EN European StandardISO International Organization for StandardizationGSB ST Quality community of coatings of steel structural elementsQualicoat Quality community of organic coatings of aluminium structural elements in
Architecture
Period ofvalidity: 05.08.2015 to 04.08.2020Dateofissue: 05.08.2015
-Translation - 7/8
Annex to accreditation certificate D-PL-11086-01-00
DAkkS/ Deutsche
Akkreditierungsstelle
QIB Quality communitv Industrial coating
Hausmethode In-house test method of ifo - Institut für Oberflächentechnik GmbH
RAL-GZ RAL-QualityLabelSÄE Standard from ANSI - American National Standards Institute
Period ofvalidity: 05.08.2015 to 04.08.2020Date of issue: 05.08.2015
-Translation - 8/8
top related