druckluftanlagen für start-, arbeits- und steuerluft
Post on 08-Apr-2022
1 Views
Preview:
TRANSCRIPT
Seite 1 (Titel)
Neuenhauser Kompressorenbau GmbH
Druckluftanlagen fürStart-, Arbeits- und Steuerluft
• Kompressoren• Druckbehälter• Zubehör
• Entwicklung• Fertigung• Service
Compressed-Air Systems forStarting, Service and Control Air
• Compressors• Air Receivers• Accessories
• Development• Production• Service
Seite 2
Inhaltsverzeichnis / Vorwort2
Contents / Introduction
Technische Beschreibungluftgekühlte Kompressoren
Technical Descriptionof air-cooled Compressors
Technische Beschreibungwassergekühlte Kompressoren
Technical Descriptionof water-cooled Compressors
2-stufige luftgekühlteKolbenkompressorenBaureihe 09.2.2 - 43.2.2
2-stage air-cooledPiston Type CompressorsSeries 09.2.2 - 43.2.2
2-stufige wassergekühlteKolbenkompressorenBaureihe 28.1.2 - 50.1.2
2-stage water-cooledPiston Type CompressorsSeries 28.1.2 - 50.1.2
2-stufige wassergekühlteKolbenkompressorenBaureihe HD
2-stage water-cooledPiston Type CompressorsSeries HD
Module
Modules
3-stufige luftgekühlteKolbenkompressorenBaureihe 40.2.3 - 80.2.3
3-stage air-cooledPiston Type CompressorsSeries 40.2.3 - 80.2.3
Handkompressoren
Hand Compressors
Schraubenkompressoren
Screw Type Air Compressors
Schraubenkompressormodule
Screw Type Compressor
Zubehör
Accessories
Regelstrecken
Pressure Regulation Lines
Druckbehälter
Air Receivers
3
4
6
8
9
10
12
14
16
17
18
19
20
Qualität und Service
Quality and Service26
Wir arbeiten mit Hochdruck
Working with high pressure
Die Neuenhauser Kompressorenbau GmbH gründete sich im Zuge
der Übernahme des Kompressorenbauprogrammes der Firma
Jos. L. Meyer im Jahre 1986. Seitdem entwickelt, fertigt und
vertreibt NK luft- und wassergekühlte Kolbenkompressoren mit
Betriebsdrücken von bis zu 60 bar.
1995 übernahm NK die Druckbehälterfertigung mit
Ventilköpfen von der Firma Thyssen Umformtechnik in Bielefeld.
Um unseren Kunden ein komplettes Lieferprogramm im Bereich
Startluft- und Arbeitsluftanlagen anbieten zu können, wurde im
Jahre 2000 ein Fachhändlervertrag mit der Firma
Tech Development Inc. über den Vertrieb von TDI TURBOTWINTM
Druckluftanlassern abgeschlossen.
NK Druckluftkomponenten werden sowohl zum Starten von
Diesel- und Gasmotoren als auch zur Erzeugung und Aufbereitung
der Arbeits- und Steuerluft in der Schiffahrt, auf
Ölbohrplattformen, in Kraftwerken, im Anlagenbau, in der
Industrie und im Handwerk verwendet.
Neuenhauser Kompressorenbau GmbH was founded by taking
over the entire compressor manufacturing program of
Jos. L. Meyer in 1986. Since then air and water cooled piston type
air compressors with operating pressures up to 60 bar are
developed and manufactured by NK.
In 1995 NK took over the air receiver program of Thyssen
Umformtechnik located in Bielefeld.
To serve our customers with a complete product range in the
field of starting air, working air and control air systems
NK became authorized distributor of TDI TURBOTWINTM Engine Air
Starters of Tech Development Inc. (TDI).
NK air system components are used primarily for starting Diesel
and Gas engines. Moreover NK supplies compressed air plants as
well as air purification systems for working and control air
applications used for shipping, offshore and onshore oil rigs,
power plants and industry.
Seite 3
Luftgekühlte KompressorenTechnische Beschreibung
Technical description
2- und 3-stufig 2- and 3-stages
3Air-cooled Compressors
Luftgekühlte Kompressoren
Luftgekühlte NK Kolbenkompressoren der Baureihe 09.2.2.-43.2.2 sind Einzylinderkompressoren. Sie verdichten die atmosphärische Luft in 2 Stufen auf Betriebsdrücke von bis zu 40 bar.Luftgekühlte NK Kolbenkompressoren der Baureihe 40.2.3-80.2.3 verdichten die atmosphärische Luft in 3 Stufen auf Betriebsdrücke von bis zu 40 bar und sind je nach Volumenstrom mit ein bis drei Zylindern ausgerüstet.
Vorteile:• Geringer Platzbedarf• Baukastenprinzip• Niedrige Kolbengeschwindigkeiten• Niedrige Verdichtungsendtemperaturen• Kein Kühlwasserkreislauf• Keine Korrosion durch Kühlwasser• Schwingungsarmer Betrieb• Wartungsfreundlich• Lange Wartungsintervalle
Ausführungen:• Kompressorblock mit Lüfterschwungrad, Ansaug- filter, Zwischen- und Nachkühler, Kondensatablaß, Sicherheitsventile und Manometer in jeder Stufe• Kompressoraggregat bestehend aus Kompressorblock, direkt angetrieben, flexible Kupplung, E-Motor, elastische Lagerung, Rückschlagventil, Öl- und Wasserabscheider, flexible Schläuche für den Druckluft- und Kondensatanschluß, Schwingungsdämpfer• Kompressoraggregat komplett mit Schaltschrank für den automatischen Betrieb, Überstromrelais, Betriebsstundenzähler, Druckschalter und E-Magnetventilen für den Kondensatablaß
Optionales Zubehör:• Dieselmotor mit E-Start/Stop, Handstart• E-Magnetkupplung, Fliehkraftkupplung oder handausrückbare Kupplung• Schmierölüberwachung• Thermostat für Druckluftaustrittstemperatur• Amperemeter• Local–Remote Schalter• Grundlastwechselschaltung für mehrere Kompressoren
Advantages:• Low space requirement• Modular design• Low piston speed• Low compression temperatures• No cooling water circuit• No corrosion by cooling water• Low vibration• Easy maintenance• Long maintenance intervals
Design:• Compressorblock with fan flywheel, air intake filter, intermediate and after cooler, condensate drains, safety valve and pressure gauges in all stages• Compressor unit consisting of compressorblock, direct driven, flexible coupling, E-motor, nonreturn valve, oil and water separator, flexible hoses for air and condensate drain connections, flexible mounting• Compressor unit with control box for monitoring, hour counter, pressure switch and solenoid valves for drainage of condensate
Optional accessories:• Diesel engine with E-Start/Stop, Hand-Start• Electromagnetic-, centrifugal or hand operated clutch• Oil level switch• Thermostat for compressed air outlet• Amperemeter• Local-Remote switch• Sequence selector switch used for more than one compressor
Air-cooledCompressors
Air cooled 2-stage NK piston type compressors series 09.2.2-43.2.2 are single cylinder compressors for operating pressures up to 40 bar.
Air cooled 3-stage NK piston type compressors series 40.2.3-80.2.3 are designed for working pressures up to 40 bar equipped with one to three cylinders depending on the required capacity.
Type Code:40.2.3.02.01.
No. of CylindersDesign RevisionNo. of StagesMode of CoolingType of Air Compressor
Typen Code:40.2.3.02.01.
Anz. ZylinderRevisionAnz. StufenKühlungKompressortyp
Seite 4
Luftgekühlte Kompressoren4
Air-cooled Compressors
Luftgekühlte KompressorenBaureihe 09.2.2– 43.2.2 / 1 Zylinder / 2-stufig
Air-cooled CompressorsSeries 09.2.2–43.2.2 / 1 cylinder / 2-stages
Baureihe 09.2.2 – 43.2.2 / 1 Zylinder / 2-stufig
Series 09.2.2–43.2.2 / 1 cylinder / 2-stages
Typ / type 18.2.2.02.01 E-MotorTyp / type 18.2.2.02.01 Diesel
Seite 5
Luftgekühlte Kompressoren
Containerschiff
Container ship
Baureihe 09.2.2–43.2.2 / 1 Zylinder / 2-stufig
Series 09.2.2–43.2.2 / 1 cylinder / 2-stages5
Air-cooled Compressors
1000-
1500-
759 x 520 x 1292
759 x 520 x 1292
180
220
09.2.2.02.01
18.2.2.02.01 1000-
1500-
5,06,07,59,0
11131619
4,55,36,6-
9,911,414,0
-
2,12,22,42,5
3,13,74,34,8
2,32,52,7-
3,44,04,6-
1000-
1500-
1160 x 630 x 1295
1160 x 630 x 1295
330
350
28.2.2.02.01
35.2.2.02.01 1000-
1500-
16192427
20243134
14,416,721,0
-
18,021,6
- -
4,45,26,27,5
5,36,37,58,7
5,36,07,0-
1000-
1500-
1163 x 630 x 1345 36543.2.2.02.01 27354045
24,0- - -
7,08,19,2
12,2
7,7- - -
5,87,0 - -
-1200
-1800
-1200
-1800
-1200
-1800
-1200
-1800
-1200
-1800
kgL x B x H mm30 bar 40 bar
m3/h30 bar 40 bar
kWTyp / Type
GewichtWeight
VolumenstromCapacity
LeistungsbedarfPower consumption
AbmessungenDimensions
Technische DatenTechnical data
Baureihe 09.2.2–43.2.2 / 1 Zylinder / 2-stufigSeries 09.2.2–43.2.2 / 1 cylinder / 2-stages
Drehzahl beiSpeed at
FrequenzFrequency
50 Hz 60 Hz
1/min
Seite 6
Luftgekühlte Kompressoren6
Air-cooled Compressors
Luftgekühlte KompressorenBaureihe 40.2.3 / 45.2.3 / 60.2.3 / 80.2.3 / 1-3 Zylinder / 3-stufig
Air-cooled CompressorsSeries 40.2.3 / 45.2.3 / 60.2.3 / 80.2.3 / 1-3 cylinders / 3-stages
Baureihe 40.2.3 / 60.2.3 / 80.2.3 / 1-3 Zylinder / 3-stufig
Series 40.2.3 / 60.2.3 / 80.2.3 / 1-3 cylinders / 3-stages
2 Zylinder / 2 cylinders
1 Zylinder / 1 cylinder 3 Zylinder / 3 cylinders
Seite 7
Luftgekühlte Kompressoren
Diesel-Kraftwerk 24,2 MW"Sunrise"gebaut von MAN B&W
Diesel power-station 24,2 MW"Sunrise"built by MAN B&W
Baureihe 40.2.3 / 60.2.3 / 80.2.3 / 1-3 Zylinder / 3-stufig
Series 40.2.3 / 60.2.3 / 80.2.3 / 1-3 cylinders / 3-stages7
Air-cooled Compressors
1000-
1500
1200 x 730 x 1400
1200 x 730 x 1400
1200 x 730 x 1400
1200 x 730 x 1400
1550 x 865 x 1600
1550 x 865 x 1600
1550 x 865 x 1600
1550 x 865 x 1600
435
445
450
455
850
870
870
990
40.2.3.02.01
45.2.3.02.01
60.2.3.02.01
80.2.3.02.01
40.2.3.03.02
60.2.3.02.02
80.2.3.02.02
60.2.3.02.03
1000-
1500
1000-
1500
1000-
1500
1000-
1500
1000-
1500
1000-
1500
1000-
1500
-1200
-
-1200
-
-1200
-
-1200
-
-1200
-
-1200
-
-1200
-
-1200
-
232637
313746
405060
496078
526284
80100120
105125145
115150185
242835
283341
364051
445366
475676
7389
107
95114132
108131165
8,09,0
11,0
8,59,5
11,5
10,010,913,0
11,013,215,0
17,519,021,0
19,023,027,0
24,028,033,0
27,029,039,0
9,510,512,5
10,011,013,0
11,812,915,3
12,315,517,7
19,021,024,0
21,024,028,0
1550 x 865 x 1600 85045.2.3.02.02 1000-
1500
-1200
-
627492
566684
18,019,024,0
21,022,026,0
26,031,037,0
28,034,041,0
1550 x 865 x 1600 99080.2.3.02.03 1000-
1500
-1200
-
156188230
140168210
30,033,044,0
25,039,052,0
1550 x 865 x 1600 97040.2.3.03.03 1000-
1500
-1200
-
8298
124
7489
112
19,024,028,0
21,026,030,0
kgL x B x H mm30 bar 40 bar
m3/h30 bar 40 bar
kWTyp / Type
GewichtWeight
VolumenstromCapacity
LeistungsbedarfPower consumption
AbmessungenDimensions
Technische DatenTechnical data
Baureihe 40.2.3 / 45.2.3 / 60.2.3 / 80.2.3 / 1-3 Zylinder / 3-stufigSeries 40.2.3 / 45.2.3 / 60.2.3 / 80.2.3 / 1-3 cylinders / 3-stages
Drehzahl beiSpeed at
FrequenzFrequency
50 Hz 60 Hz
1/min
Seite 8
Luftgekühlte Kompressoren8
Air-cooled Compressors
Handkompressor H25
Hand Compressor H25
2 Zylinder / 2-stufig 2 cylinder / 2-stages
Luftgekühlter Handkompressor
Der 2-stufige NK Kolbenkompressor H25 ist einZweizylinderkompressor für Betriebsdrücke vonbis zu 50 bar.
Ausführungen• Handkompressor mit Handhebel• Handkompressor mit Handhebel und 30 ltr., 63 ltr., 90 ltr. oder 125 ltr. Behälter
Constructions:• Hand compressor with hand lever• Hand compressor with hand lever and 30 ltr.,63 ltr., 90 ltr. or 125 ltr. air receiver
Air-cooledHand Compressor
The 2-stage piston type compressor H25 is a double cylinder compressor usedfor working pressures up to 50 bar.
DrehzahlSpeed
50doublestrokes/
min.
1,8 Handoperated
312 x 230 x 198,5
600 x 400 x 860
600 x 400 x 1300
600 x 400 x 1610
600 x 400 x 2120
28
90
150
180
210
H25
H25 + 30 ltr.
H25 + 63 ltr.
H25 + 90 ltr.
H25 + 125 ltr.
1/min kgL x B x H mm30 barm3/h
30 bar kWTyp / Type
GewichtWeight
VolumenstromCapacity
LeistungsbedarfPower consumption
AbmessungenDimensions
Technische DatenTechnical data
H25 / 2 Zylinder / 2-stufigH25 / 2 cylinder / 2-stages
Typ / type H25 + 30 ltr.
Seite 9
Wassergekühlte KompressorenTechnische Beschreibung
Technical description
2- und 3-stufig 2- and 3-stages
9Water-cooled Compressors
Wassergekühlte Kompressoren
Wassergekühlte NK Kolbenkompressoren der Baureihe 28.1.2-50.1.2 sind Einzylinder-kompressoren. Sie verdichten die atmosphärische Luft in 2 Stufen auf Betriebsdrücke von bis zu 40 bar.
Wassergekühlte NK Kolbenkompressoren der Baureihe HD verdichten die atmosphärische Luft in zwei Stufen auf bis zu 40 bar und sind je nach Volumenstrom mit ein oder zwei Zylindern ausgerüstet.
Vorteile:• Geringer Platzbedarf• Baukastenprinzip• Niedrige Kolbengeschwindigkeiten• Niedrige Verdichtungsendtemperaturen• Kühlwasser für optimale Kühlung der Verdichtungsluft• Schwingungsarmer Betrieb• Wartungsfreundlich• Lange Wartungsintervalle
Ausführungen:• Kompressorblock mit Lüfterschwungrad, Ansaug- filter, Zwischen- und Nachkühler, Kondensatablaß, Sicherheitsventil und Manometer in jeder Stufe, manuelle Anfahrentlastung• Kompressoraggregat bestehend aus Kompressorblock, direkt angetrieben, flexible Kupplung, E-Motor, elastische Lagerung, Rückschlagventil, Öl- und Wasserabscheider, flexible Schläuche für den Druckluft-, Kühlwasser und Kondensatanschluß, Schwingungsdämpfer• Kompressoraggregat komplett mit Schaltschrank für den automatischen Betrieb, Überstromrelais, Betriebsstundenzähler, Druckschalter und E-Magnetventilen für den Kondensatablaß und Kühlwasserkreislauf, Kühlwasserströmungs- wächter
Optionales Zubehör:• Dieselmotor• E-Magnetkupplung, Fliehkraftkupplung oder handausrückbare Kupplung• Schmierölüberwachung• Thermostat für Druckluftaustrittstemperatur und Kühlwasser• Amperemeter• Local–Remote Schalter• Grundlastwechselschaltung für mehrere Kompressoren• Kühlwasserpumpe• Einrichtung zur Seewasserkühlung
Advantages:• Less space required• Modular design• Low piston speed• Low compression temperatures• Cooling water circuit for optimum cooling of the compressed air• Low vibration• Easy maintenance• Long maintenance intervals
Design:• Compressorblock with fan flywheel, air intake filter, intermediate and aftercooler, condensate drains, safety valves and pressure gauges in all stages, manual unloading device• Compressor unit consisting of compressor block, direct driven, flexible coupling, E-motor, elastic mounting, nonreturn valve, oil and water separator, flexible hoses for air, cooling water and condensate drain connection, flexible mounting• Compressor unit with control box for monitoring, hour counter, pressure switch and solenoid valves for drainage of condensate and cooling water circuit, cooling water flow detector
Optional accessories:• Diesel engine• Electromagnetic-, centrifugal or hand operated clutch• Oil level switch• Thermostat for compressed air and cooling water circuit• Amperemeter• Local-Remote switch• Sequence selector switch used for more than one compressor• Cooling water pump• Accessories for sea water cooling
Water-cooledCompressors
Water cooled 2-stage NK piston type compressors series 28.1.2-50.1.2 are single-cylinder compressors for operating pressures up to 40 bar.
Water cooled 2-stage NK piston type compressors series HD are used for working pressures up to 40 bar. The compressors are equipped with one or two cylinders depending on the required volume flow.
Seite 10
Wassergekühlte Kompressoren10
Water-cooled Compressors
Wassergekühlte KompressorenBaureihe 28.1.2 - 50.1.2 /1 Zylinder / 2-stufig
Water-cooled CompressorsSeries 28.1.2 – 50.1.2 / 1 cylinder / 2-stages
Baureihe 28.1.2 - 50.1.2 / 1 Zylinder / 2-stufig
Series 28.1.2 - 50.1.2 / 1 cylinder / 2-stages
Typ / type 28.1.2.02.01
Seite 11
Wassergekühlte Kompressoren
Luxuskreuzfahrtschiff"Brilliance of the Seas"
Luxury Cruise Liner"Brilliance of the Seas"
Baureihe 28.1.2 - 50.1.2 / 1 Zylinder / 2-stufig
Series 28.1.2-50.1.2 / 1 cylinder / 2-stages11
Water-cooled Compressors
7501000
-1500
28.1.2.02.01 10,815,3
17,5 22,0
-
1217202529
3,04,25,05,77,0
3,35,05,86,1-
7501000
-1500
43.1.2.02.01 18,023,4
- -
20263139
4,46,07,18,5
4,97,1
- -
7501000
-1500
50.1.2.02.01 21,528,8
- -
24323951
5,47,29,2
10,5
6,08,6
- -
7501000
-1500
-
--
1200-
1800
--
1200-
--
1200-
--
1200-
1800
35.1.2.02.01 13,519,022,027,3
-
1521253135
3,64,75,56,58,2
4,05,56,47,0-
30 bar 40 barm3/h
30 bar 40 barkWTyp / Type
VolumenstromCapacity
4567-
34567
67--
5678
89--
789
10
5678-
45679
30 bar 40 barl/min
KühlwasserbedarfCooling-waterrequirement
LeistungsbedarfPower consumption
Technische DatenTechnical data
Baureihe 28.1.2 – 50.1.2 / 1 Zylinder / 2-stufigSeries 28.1.2 – 50.1.2 / 1 cylinder / 2-stages
Drehzahl beiSpeed at
FrequenzFrequency
50 Hz 60 Hz
1/min
1010 x 655 x 1295 340
1010 x 655 x 1545 400
1010 x 655 x 1545 435
1010 x 655 x 1295 365
kgL x B x H mm
GewichtWeight
AbmessungenDimensions
Seite 12
Wassergekühlte Kompressoren12
Water-cooled Compressors
Wassergekühlte KompressorenBaureihe HD / 1-2 Zylinder / 2-stufig
Water-cooled CompressorsSeries HD / 1-2 cylinders / 2-stages
Baureihe HD / 1-2ylinder / 2-stufig
Series HD / 1-2 cylinders / 2-stages
Typ / type HD60/2
Seite 13
Wassergekühlte Kompressoren
KCA-DEUTAGÖlbohrplattform T-66Yibal 446, Oman
KCA-DEUTAGOnshore Rig T-66Yibal 446, Oman
Baureihe HD / 1-2 Zylinder / 2-stufig
Series HD / 1-2 cylinders / 2-stages13
Water-cooled Compressors
750-
1000-
1870 x 960 x 1900 1435HD100/2 151182201211
167202223240
32,039,043,050,0
34,642,547,356,5
750-
1000-
1870 x 960 x 1900 1420HD90/2 141170187202
156188208230
30,036,039,047,0
32,539,243,053,0
750-
1000-
1870 x 960 x 1900 1450HD110/2 171206229241
190229254274
38,045,050,060,0
41,049,055,068,0
1000-
1500
1400 x 920 x 1500 615HD40 435062
475670
10,912,614,0
13,014,216,1
1000-
1500
1450 x 920 x 1500 620HD45 475565
526275
11,513,516,0
12,615,318,4
1000-
1500
1450 x 920 x 1500 645HD50 526274
587085
13,015,719,0
14,317,721,9
-1000-
-
1590 x 960 x 1800 930HD80 697789
7685
102
16,517,521,5
18,019,224,3
-1000
-
1590 x 960 x 1800 940HD90 8594
107
94104122
19,020,023,5
20,722,030,0
-1000
-
1590 x 960 x 1800 950HD100 91100114
101111130
20,021,026,0
21,823,029,4
-1000
-
1590 x 960 x 1800 958HD110 103115132
114127150
23,025,030,0
25,027,534,0
1000-
1500
1750 x 960 x 1800 1050HD40/2 8599
123
94113140
22,025,028,0
24,228,232,2
1000-
1500
1750 x 960 x 1800 1055HD45/2 94110132
104125150
23,027,032,0
25,330,536,8
1000-
1500
1750 x 960 x 1800 1115HD50/2 105123149
116140170
26,031,037,0
28,635,042,5
-1000
-
1870 x 960 x 1900 1340HD80/2 138153179
153170204
32,034,042,0
-1000
-
- 900
-1200
- 900
-1200
- 900
-1200
-1200
-
-1200
-
-1200
-
900-
1200
900-
1200
900-
1200
900-
1200
-1200
-
-1200
-
-1200
-
900 -
1200
900-
1200
1870 x 960 x 1900 1330HD70/2 122135159
135150180
29,032,038,0
31,635,243,0
35,037,447,5
26323642
35384248
28303440
34364046
31333846
37394452
101213
121415
111314
131516
121415
151718
141517
171820
151619
192023
161721
212226
171924
222429
202225
252730
212426
262931
242832
293337
293036
272834
333440
353642
kgL x B x H mm30 bar 40 bar
m3/h30 bar 40 bar
kWTyp / Type
GewichtWeight
VolumenstromCapacity
LeistungsbedarfPower consumption
AbmessungenDimensions
Technische DatenTechnical data
Baureihe HD / 1-2 Zylinder / 2-stufigSeries HD / 1-2 cylinders / 2-stages
Drehzahl beiSpeed at
FrequenzFrequency
50 Hz 60 Hz
1/min
30 bar 40 barl/min
KühlwasserbedarfCooling-waterrequirement
-1000
-
1590 x 960 x 1800 835HD70 626679
687590
15,016,019,0
16,417,621,5
900-
1200
131416
161719
-1000
-
1000-
1500
1350 x 930 x 1490 685HD60 546882
648096
13,016,019,2
11,014,017,0
-1200
-
202228
242734
1000-
1500
1500 x 960 x 1490 1200HD60/2 113141174
133166205
29,036,044,0
26,032,039,0
-1200
-
283441
344150
Kompressormodul 1 x HD40 - E-Motor und 1 x HD40 - DieselCompressor Module 1 x HD40 - E-Motor and 1 x HD40 - Diesel
Zylinder, SchnittmodellCylinder, cutaway model
Seite 14
Module14
Modules
Technische Beschreibung
Technical description
Kompressor Modul 2 x 60.2.3.03.01.10.63
Compressor Module 2 x 60.2.3.03.01.10.63
Module
Kundenspezifisch angefertigte Module bestehend aus Druckbehältern und / oder Kompressoren werden vor allem eingesetzt, wenn sehr kurze Aufbauzeiten zu realisieren sind. Komplett montiert, verrohrt und verdrahtet sind die Einheiten nach kurzer Installation betriebsbereit.
Specially manufactured modules according to customer specification consisting of air receivers and / or compressors are applied when short and quick erection times must be realized. Completely mounted, piped and wired the installation time is reduced to a minimum.
Modules
Seite 15
Module15
Modules
Katamaran Fähre "Shinas", AustalCatamaran Ferry "Shinas", Austal
Kompressor Modul 1 x 43.2.2.02.01 + 500 lCompressor Module 1 x 43.2.2.02.01 + 500 l
Kompressoreinheit1 x 355 l Druckluftbehälter und 1 x 18.2.2.02.01.10.23
Compressor Unit 1 x 355 l Air Receiver and 1 x 18.2.2.02.01.10.23
Technische Beschreibung
Technical description
Photographs courtesy of Austal, Australia, 2008
Seite 16
Schraubenkompressoren16
Screw type air compressors
Technische Beschreibung
Technical description
Schraubenkompressoren
liefert Schraubenkompressoren.
Die anschlußfertigen Schraubenverdichter sind öleingespritzt. Durch rundherum herausnehmbare schallgedämmte Türen sind alle funktionsrelevan-ten Teile leicht zugänglich. Ein separater Ölabscheider wird nicht benötigt. Auf Nachfrage können ergänzende Ausstattungen geliefert werden wie z.B. eine elektronische Steuerung, ein integrierter Kälte- trockner, frequenz- geregelter Antrieb, potentialfreie Kontakte oder halogenfreie Kabel.
delivers Screw Type Air Compressors.
To cover the full range of air compressors for marine and industrial applications NK sells screw type air compressors. The units are oil-injected and ready for operation. For easy access the soundproofed doors can be removed, a separate oil separator is not required. On request additional options such as electronic control, air dryers, halogenfree cables or potentialfree contacts can be offered.
Screw Type Air Compressors
Schraubenkompressor
Screw Type Air Compressor
VolumenstromCapacity
TypType
m3/min50/60 Hz
kW7,5 bar 10 bar 13 bar
AbmessungDimensions
mm
Leistungs-bedarfPower
Consumption
kg
GewichtWeight
Technische DatenTechnical data
SchraubenkompressorenScrew Type Air Compressors
Leistungsstärkere Typen auf Anfrage / Types with bigger capacities on request
133
133
141
145
266
280
532
547
591
809
730
830
980
525 x 504 x 951
525 x 504 x 951
525 x 504 x 951
525 x 504 x 951
675 x 574 x 1255
675 x 574 x 1255
791 x 1281 x 1290
791 x 1281 x 1290
791 x 1281 x 1290
931 x 1392 x 1574
931 x 1392 x 1574
931 x 1392 x 1574
1110 x 1505 x 1575
L x B x H
0,46
0,63
0,86
1,18
1,76
2,24
2,91
3,46
4,38
5,05
6,15
7,25
9,30
0,37
0,51
0,72
1,06
1,50
1,96
2,62
3,10
4,01
4,28
5,24
6,51
7,96
0,28
0,39
0,57
0,86
1,16
1,51
2,20
2,66
3,52
3,76
4,56
5,55
6,70
3,0
4,0
5,5
7,5
11,0
15,0
18,5
22,0
30,0
30,0
37,0
45,0
55,0
RS-TOP 3.0
RS-TOP 4.0
RS-TOP 5.5
RS-TOP 7.5
RS-TOP 11.0
RS-TOP 15,0
RS 18.5
RS 22.0
RS 1-30
RS 2-30
RS 37.0
RS 45.0
RS 55.0
Seite 17
Schraubenkompressormodule17
Screw Type Air Compressors
Schraubenkompressor-module
projektiert Arbeitsluft- und Steuerluft-kompressormodule.
Auf Basis von Kundenspezifikationen konstruiert und fertigt NK kompakte Module für Arbeitsluft- und Steuerluftanwendungen. Die kompletten Einheiten umfassen Schraubenkompressoren, Behälter, Trockner, Filter und anderes Zubehör inkl. der Verrohrung und elektrischen Verkabelung aller Komponenten.
offers a various number of accessories.
NK plans Working Air and Instrument Air Com-pressor Modules. Based on customer specifications NK designs and builds compact modules for Working Air and Instrument Air Applications.The complete units comprise screw type air compressors, air receivers, air dryers, filters and other accessories incl. piping and wiring of all components.
Screw Type Compressor Modules
Technische Beschreibung
Technical description
Schraubenkompressormit Behälter und Trockner
Screw Type Air Compressor with Air Receiver and Air Dryer
Schraubenkompressor auf Rahmen mit Behälter, Trockner und FilterScrew Type Air Compressor on commonFrame with Air Receiver, Dryer and Filter
Seite 18
Zubehör18
Accessories
Technische Beschreibung
Technical description
Kältetrockner / Refrigeration Air Dryer
Zubehör
bietet eine Vielzahl von Zubehör an.
NK bietet eine Vielzahl an weiterem Zubehör für Druckluftanwendungen an. Dazu zählen unter anderem Filter, Druckminderer, Kälte- und Adsorptionstrockner.
offers a various number of accessories.
NK offers a various number of accessories for all compressed air applications such as refrigeration and adsorption / desiccant air dryers, filters or pressure reducing equipment.
Accessories
Druckluftfilter / Compressed Air Filter
Elektrischer Kondensatableiter / Electrical Condensate Drain Valve
Adsorptionstrockner / Desiccant Air Dryer
Seite 19
Regelstrecken19
Pressure Regulation Lines
Regelstrecke 1/2" / Regulation Line 1/2" Regelstrecke 1" / Regulation Line 1"
Regelstrecke 1 1/2" / Regulation Line 1 1/2"
Regelstrecken
legt Regelstrecken aus.
Regelstrecken bestehen aus Druckminderern, Filtern, Sicherheitsventilen und Anzeigen und werden zur Druckreduzierung auf Arbeitsdruck des nachgeschaltenen Druckluftverbrauchers eingesetzt.
configures regulation lines
Regulation lines consist of pressure regulators, filters, safety valves and gauges. The main purpose is to reduce the working pressure to suit the requirements of the downstream compressed air components.
Pressure Regulation Lines
Technische Beschreibung
Technical description
Seite 20
Druckbehälter20
Air Receivers
Technische Beschreibung
Technical description
Druckbehälter /Druckgeräte
fertigt Druckbehälter aus Stahl und Edelstahl.
Dabei haben wir uns auf die Herstellung von Start-luftbehältern spezialisiert, welche zur Speicherung von Druckluft dienen, die zum Starten von Groß-dieselmotoren benötigt wird. Haupteinsatzbereiche sind industrielle Kraftwerksanlagen und Schiffs-antriebe.Die Behälter gemäß oder in Anlehnung an DIN 6274 bzw. DIN 6275 werden standardmäßig in den Größen von 30 bis 2500 Litern für einen Betriebs-druck von 30 bar geliefert. Größere Behälter und Sonderausführungen mit Inhalten bis ca. 25.000 Litern oder mit anderen Betriebsdaten fertigen wir nach Kundenwunsch. Die Behälter und Ventilköpfe werden nach den Regeln der internationalen Klassifikations- und Abnahmegesellschaften konstruiert, hergestellt, geprüft und zertifiziert.
manufactures air receivers made of steel or stainless steel.
We concentrate on the fabrication of starting-air receivers which are used for storage of compressed air which is needed to start Diesel engines in power generation and ship propulsion applications.Standard air receivers according or similar to DIN 6274 and DIN 6275 are available in sizes from 30 to 2500 litres for a working pressure of 30 bar. Bigger bottles and special constructions with capacities up to approx. 25.000 litres or with deviating operating data will be delivered on request.The air receivers and valve heads are designed, fabricated, tested and certified according to the rules of the international classification societies and surveillance authorities.
Air Receivers /Pressure Equipment
Startluftbehälter mit Ventilkopf nach DIN 6274Starting Air Receiver with Valve Head acc. to DIN 6274
Seite 21
Druckbehälter
FregatteF124"Sachsen"
FrigateF124"Sachsen"
Technische Beschreibung
Technical description21
Air Receivers
DurchmesserDiameter
NenninhaltNominal capacity
324
324
324
324
480
480
480 650
480 650
650 800
650 800
800 900
800 900
800 900
800 900
800 900
1200
900 1200
900 1200
1200*
1200*
1200*
1400*
1400*
2500*
d in mm l1 in mmLiterbar
Länge über FlanscheLenght over flanges
Technische DatenTechnical Data
DruckbehälterAir Receivers
30
63
90
125
180
250
355
500
710
1000
1250
1500
1650
1750
2000
2250
2500
3000
3250
3500
4000
4500
10000
max. 42
max. 33
549
987
1297
1807
1217
1767
23701377
32041862
27401770
35602350
29302370
34602790
37803040
40003210
461036302180
40452415
44702645
*
*
*
*
*
*
*größere Behälter und abweichender Druck auf Anfrage /*bigger air receivers and deviating pressure on request
bis/to
bis/to
Arbeitsdruck Workingpressure
Seite 22
Ventilköpfe22
Valve heads
Technische Beschreibung
Technical description
Ventilkopf DN 38 nach DIN 6276
Valve Head DN 38 acc. to DIN 6276
Ventilköpfenach DIN 6276 und ähnlich
Valve Headsacc. to DIN 6276 and similar
Startluftbehälter rüsten wir mit passenden Ventil-köpfen in den Nennweiten DN 38 (nach DIN 6276) sowie DN 50 und DN 80 aus. Am Ventilkopf sind die Absperr-, Sicherheits- und Kontrollarmaturen zentral und platzsparend in einem Gehäuse angeordnet.
Starting-air receivers are supplied with suitable valve heads DN 38 (DIN 6276), DN 50 or DN 80. The shutoff valves, safety and control instruments are integrated into one block in a central and space saving way.
Ventilkopf DN 50 / Valve Head DN 50
Ventilkopf DN 80 / Valve Head DN 80
Seite 23
Ventilköpfe
Luxuskreuzfahrtschiff"Freedom of the Seas"
Luxury Cruise Liner"Freedom of the Seas"
Technische Beschreibung
Technical description23
Valve Heads
Ventilkopf DN 50 Valve Head DN 50 A B D
FormForm
StehendVertical
LiegendHorizontal
1 Anlassluftventil DN 50 Starting-air valve DN 50
2 Füllventil DN 18 Filling valve DN 18
3 Manometerabsperrventil Pressure gauge shutoff valve
4 Sicherheitsventil Safety valve
5 Entwässerungsventil Drain valve
6 Hilfsluftventil DN 12 Auxiliary air valve DN 12
AusrüstungEquipment
AufstellungInstallation
7 Entlüftungsventil Venting valve
Ventilkopf DN 38 Valve Head DN 38
1 Anlassluftventil DN 38 S tarting-air valve DN 38
2 Füllventil DN 18 Filling valve DN 18
3 Manometerabsperrventil Pressure gauge shutoff valve
4 Sicherheitsventil Safety valve
6 Hilfsluftventil DN 8 Auxiliary air valve DN 8
5 Entwässerungsventil Drain valve
A AE B
FormForm
BE C CE
StehendVertical
LiegendHorizontal
7 Entlüftungsventil Venting valve
AusrüstungEquipment
AufstellungInstallation
Luftaustritt DN 38Air outlet DN 38
Luftaustritt DN 50Air outlet DN 50
Lufteintritt DN 18Air inlet DN 18
Lufteintritt DN 18Air inlet DN 18
Entwässerungsrohr (nur Form A oder AE)Drain pipe (only form A or AE)
Entwässerungsrohr (nur Form A)Drain pipe (only form A)
1
1
2
6
2
3
3
4
4
5
5
6
7
Seite 24
Druckbehälter24
Air Receiver
Sonderkonstruktion
Special design
Druckbehälter2700 l + 1100 l
Air Receiver2700 l + 1100 l
Sonderbehälter
Special Air Receivers
projektiert, fertigt und liefert Sonderbehälter und Kleinserien für verschiedene Anwendungen speziell nach Anforderungen der Kunden.
designs, manufactures and supplies special air receivers and small series for various applications – custom-made products according to individual installation and operation requirements.
Seite 25
Druckbehälter
Diesellokomotive"Voith Maxima 40CC"
Diesel Locomotive"Voith Maxima 40CC"
Sonderkonstruktion
Special design25
Air Receivers
Kugeldruckbehälter 115 Liter, 220 barSpherical Air Receivers 115 liters, 220 bar
2 x 250 Liter, 42 bar, mit Ventilkopf 2 x 250 liters, 42 bar, with Valve Head
2000 Liter, 33 bar, mit automatischer Entwässerung2000 liters, 33 bar, with automatic Drain Unit
Seite 26
Qualität und Service26
Quality and Service
24 Stunden am Taggesicherte Qualität –überall!
NK ist gemäß EN ISO 9001 zertifiziert und hat darüber hinaus die Bestätigung der Qualitätssicherung für Planung und Fertigung von Kompressoren und Druckbehältern mit Ventilköpfen sowie Service an Kompressoren in Kernkraftwerken nach KTA 1401 erhalten. Unsere Produkte sind typenzugelassen und werden entsprechend der Vorschrif- ten der internationalen Klassifikationsgesellschaften für Schiffahrt und Offshore gefertigt. Qualität garantieren wir auch nach der Auslieferung eines Kompressors, eines Druck-behälters oder eines Druckluftanlassers. Selbstver-ständlich stehen wir unseren Kunden auch während der gesamten Betriebszeit unserer Anlagen fachmännisch zur Verfügung. Schnelle und langfristige Versorgung mit Original NK-Ersatzteilen weltweit, Wartungs- und Service-verträge, Schulungen und Inbetriebnahmen stellen dabei nur einen Teil des Leistungsspektrums dar. Unsere Mitarbeiter und Händler garantieren Ihre volle Unterstützung.
NK is certified acc. to EN ISO 9001. Moreover we are certified acc. to KTA 1401 as designing, manufacturing and service company for compressed-air plants in nuclear power stations. Our products are type-approved and manufactured acc. to the rules of the relevant classification societies for shipbuilding and offshore industry.
Quality is guaranteed after delivery of the compressors, air receivers or engine air starters.Needless to say that NK supports and assists its costumers during the entire operation period. Fast and long-term supply with Genuine NK SpareParts worldwide, maintenance and service contracts, training and commissioning represent just a part of our overall performance range. Our employees andrepresentatives ensure full customer support.
Around the clockguaranteed Quality –everywhere!
Seite 27
Qualität und Service27
Quality and Service
American Bureau of Shipping
China Classification Society
Bureau Veritas
Germanischer Lloyd
Lloyd's Register
Russian Maritime Register of Shipping
Russian River Register
Det Norske Veritas
und weitere and others
08/1
4/10
00 .
ww
w.in
go
arn
dt.
de
(Group of Neuenhauser Companies)
top related