main catalogue and price list 2006 / 2007 · 2019-03-01 · maschinenbau- und dienstleistungs gmbh...
Post on 31-Mar-2020
3 Views
Preview:
TRANSCRIPT
Maschinenbau- und Dienstleistungs GmbH
Main catalogue and price list 2006 / 2007
ww
w.kraeku.de
info@kraeku.de
Services
Customer service
Many years of
supplying spare parts
Functional safety
examination
Training
Edge grinding machine
KSM/KOS 150/250
Belt grinding machine
B 75 / B 150
High power
suction units
Brushing deburring machine
BEM 300
Table belt grinder
TBS 75 plus
Polishing machine
POM 400 e
Planing machine
A + D 400
Direct drive
DA 4000 / 5000
Disc sander
TSM 300
Belt grinding machine
BTS 150
Horizontal grinder
WA 600
Horizontal wet grinding machine
WAN 600
New
Belt- disc sander
BTS 75
Format circular saw
FKS 3000
Circular saw with sliding table
KS 2012
Maschinenbau- und Dienstleistungs GmbH
Please send your orders and enquiries directly to:
You can also request our own competent customer service to visit you onsite from this address.
Maschinenbau und Dienstleistungs GmbH
Flottstraße 25
D-56472 Großseifen
Tel.: +49 (0) 26 61 / 4 04 84
Fax: +49 (0) 26 61 / 4 05 73
KRÄKU
Dear customer,
We manufacture in Germany and with our employees will also continue to provide you with solid and robust
machines for your production.
We have jointly developed many special solutions with our customers and would be delighted to also work for
you. Please contact us.
Our customer service accompanies you during the service life of machines purchased from us with wearing
and spare parts and repairs.
You will not find short-lived mass globalisation products in our range.
�
Our testing workshop keeps an extensive repertoire of tools available for all machines which we use to resolve
your work task to your satisfaction. Please contact us and send us your work sample.
In the area of we realise solutions in the belt widths 20 to 250 mm and we are flexible for
your needs in the length range.
We continue testing jointly with you until we have found an acceptable solution for you.
The same applies to sawing work in steel or other materials.
All machines can be operated with i . Thus we can optimally
adapt to your materials or material combinations.
You can purchase the base units of our machines so that you can easily and economically integrate them in
good time in your already existing or planned system and concepts.
Please also note our very flexible solutions using and their practically unlimited adjustment
possibilities.
All are arranged and can be brought close to the machine operator using
a swivel arm. Foot switches and EMERGENCY STOP buttons provide additional safety.
belt grinders,
polishing work
nfinitely adjustable speed regulation
columns
operating controls ergonomically
�
�
Please note for all machines, that these are firmly attached to the floor using anchor bolts.
- 2 -
Directions to our factory
Directions
Maschinenbau- und Dienstleistungs GmbH
Directions via the A3 coming from the direction
of Cologne:
At Siegburg-West, turn left (East) on to the A560
for 11.9 km in the direction Altenkirchen
At 7 Hennef- Ost, direction East on local road for
1.8 km
Turn left (East) on to the B8 for 26.3 km
Turn left (Northeast) on to the B256 for 2.4 km in
the direction of Bad Marienberg
Turn right (East) on to the B414 for 17.7 km
Turn left (Southeast) on to local road for 0.9 km
At Korb, stay on the local road in the direction of
Westerburg for 1.1 km
At Unnau, stay on the local road in the direction
of Westerburg for 3.8 km
At Hardt, stay on the local road in the direction of
Langenbach for 1.4 km
At Langenbach, stay on the local road in the
direction of Rennerod for 1 km
Arrival Großseifen
�
�
�
�
�
�
�
�
�
�
�
Directions from the A3 coming from the direction
of Frankfurt:
At junction 42 Limburg-Nord, turn right (North)
on to the B49 [B54] , take the [E44] after 4.9 km
Turn left (North) on to the B54 for 23.6 km
At Emmerichenhain, turn left (West) on to the
local road and take the direction Hachenburg for
1,8 km
At Neustadt,stay on the local road in the
direction of Hachenburg for 3.0 km
At Fehl-Ritzhausen, stay on the local road in the
direction of Hachenburg for 1.3 km
At Stockhausen-Illfurt, stay on the local road for
2.6 km
Arrival Großseifen
�
�
�
�
�
�
�
Directions via the A48 coming from the direction
of Koblenz:
At Dernbach, turn right (Southeast) on to the A3
[E35], [E44] for 5.9 km in the direction of
Wiesbaden
At Ailertchen, turn left (North) on to the local
road for 2.1 km
At Dreisbach, continue on the local road for 1.7
km in the direction of Hachenburg
At Hahn, continue on the local road for 1.0 km
in the direction of Rennerod
At Langenbach, continue on the local road for
1.4 km
�
�
�
�
�
Directions via the A45 coming from the direction of Dortmund:
At junction 24 Haiger/Burbach, turn right (Southwest) on to the
B54 for 14.5 km
Turn right (West) on to the B414 for 3.5 km
At Hof, turn left (West) on to the local road for 1.6 km in the
direction of Hachenburg
At Nisterau, stay on the local road for 1.4 km
At Stockhausen-Illfurt, stay on the local road for 2.6 km
�
�
�
�
�
Directions via the A45 coming from the
direction of Frankfurt:
At junction 26 Herborn-West, turn left (West)
on to the B2555 for 11.4 km
Turn right (West) on to the B414 for 9.6 km
At Hof, turn left (West) on to the local road for
1.6 km in the direction of Hachenburg
At Nisterau, stay on the local road for 1.4 km
At Stockhausen-Illfurt, stay on the local road
for 2.6 km
Arrival Großseifen
�
�
�
�
�
�
Flottstr. 25 • 56472 Großseifen • Tel. +49 (0)2661/40484 • Fax. +49 (0)2661/40573 • Email: info@kraeku.de • Website: www.kraeku.de
Kleinmaischeid
Geographic centre of the European Union.
- 3 -
Flottstr. 25 • 56472 Großseifen • Tel. +49 (0)2661/40484 • Fax. +49 (0)2661/40573 • Email: info@kraeku.de • Website: www.kraeku.de
Piecework
Maschinenbau- und Dienstleistungs GmbH
Lohnarbeit
As well as our own products, the area of piecework has developed into another, very important
source of income for us in recent years.
In the area of mechanical engineering,
we are pleased to take over the planning for you and the manufacture and assembly of your components or
complete machines.
we manufacture in batches or series production.
we are also happy to accept other related types of work.
�
�
�
In the area of mechanical machining,
we produce work pieces of the highest quality on our modern CNC machines.
we produce all parts individually or in small batches for you and on request also take care of the surface finishing
(hardening, anodising, etc.).
we obtain the material or you provide it.
we have all necessary machines such as hacksaws, bandsaws, circular saws and belt grinders for treatment of
primary material.
we manufacture drilled, milled, turned and welded parts.
we supply everything from one source: at short notice and with high quality.
�
�
�
�
�
�
You also benefit from our experience and technical possibilities which we have accumulated over
decades from the manufacture of our own products.
Please contact us!
Metal circular saw
KS 2012
Polishing machine
POM 400 e
Table belt grinder
TBS 75 plus
- 4 -
Contents
Maschinenbau- und Dienstleistungs GmbH
Pa
ge
82
Safety
Pa
ges
78
-81
Suction
cleaning
Pa
ges
76
-77
Turning
Pa
ges
74
-75
Milling
Pa
ges
70
-73
Planing
Pa
ges
54
-69
Saw
ing
Pa
ges
50
-53
Drilling
Pa
ges
48
-49
Deburring
Pa
ges
44
-47
Polishing
Pa
ges
14
-43
Grinding
- 5 -
Flottstr. 25 • 56472 Großseifen • Tel. +49 (0)2661/40484 • Fax. +49 (0)2661/40573 • Email: info@kraeku.de • Website: www.kraeku.de
Special solutions
Maschinenbau- und Dienstleistungs GmbH
Special solutionsSpecial solutions
K 110
Configuration variants
Technical data and tool combinations DA 4000/5000
Pages 38 - 39
�
�
Direct drive with extraction system
DA 4000 / 5000 can be adjusted for height, can be swivelled and
rotated
Price on request
Attention! Machine must be firmly anchored to the floor.
K 105Configuration variants
�
�
�
�
�
�
�
�
�
Operating controls following consultation
Polishing & milling motor with double-sided shaft, length max.
500mm
Speeds: 1 speed 1500 rpm 2 speed 700/1500 rpm
Infinitely variable 700 - 1500 rpm
Motor can be adjusted for height
o by hand using crank
o with electric motor
Motor unit can be swivelled around the column axis (360°)
Motor shaft can be swivelled from horizontal to vertical
Suction hoods
Foot pedal
Emergency Stop
Price on request
Attention! Machine must be firmly anchored to the floor.
K100
Configuration variants
Price on request
�
�
�
�
�
�
�
�
�
�
�
2 polishing motors mounted on column
Height adjustment of the motors
Length of the polishing shaft from 200 to 500 mm
With / without foot pedal
Motors with infinitely variable speed control
Motors with one speed
Motors with 2 fixed speeds
Shaft cover
Suction hoods permanently installed
Detachable suction hoods
Motors are controlled separately
Attention! Machine must be firmly anchored to the floor.
- 6 -
Flottstr. 25 • 56472 Großseifen • Tel. +49 (0)2661/40484 • Fax. +49 (0)2661/40573 • Email: info@kraeku.de • Website: www.kraeku.de
Special solutions
Special solutionsSpecial solutions
Maschinenbau- und Dienstleistungs GmbH
K 125
Configuration variants
Technical data, see also table belt grinder Pages 30 - 31
�
�
�
�
�
�
Extended polishing belt grinder unit
Polishing shaft holder according to individual requirements
Belt grinder can be infinitely adjusted from horizontal to vertical
Belt width according to customer desire
Height and side adjustable supports can be mounted for supporting
work pieces
Extraction in the casing base is possible
Price on request
Attention! Machine must be firmly anchored to the floor.
K 120
Configuration variants
Technical data, see also table belt grinder TBS 75 Pages 30 - 31
�
�
�
�
�
�
�
Polishing belt grinding unit
Alternatively, a 300 mm Ø sanding disc can be mounted
For special tasks, height and side adjustable suports for the brushes
are available
Very robust design
Technical data and performance can be designed according to
customer desire
Extraction and machine case can be integrated
Belt grinder can be swivelled (90°)
Price on request
Attention! Machine must be firmly anchored to the floor.
K 115
Configuration variants
Technical data, see also polishing machine POM 400/300 Pages 44 - 45
�
�
�
�
Polishing / grinding unit
Shaft holder on both sides for different tools
(Brushes, etc.)
Suction hoods can be rotated according to customer desire and dust
intensity
Dust certified extraction system (H2 approval) can be connected
Price on request
Attention! Machine must be firmly anchored to the floor.
- 7 -
Flottstr. 25 • 56472 Großseifen • Tel. +49 (0)2661/40484 • Fax. +49 (0)2661/40573 • Email: info@kraeku.de • Website: www.kraeku.de
Special solutions
Maschinenbau- und Dienstleistungs GmbH
Special solutionsSpecial solutions
K 140
Configuration variants
Technical data, see disc sander D-TSM 600 Pages 18 - 19
MBS 75 S and TOP 300 mounted on a cabinet 384.705
Extraction is possible on the DTSM and on the belt grinder
�
�
Price on request
K 135
Configuration variants
Technical data, see metal belt grinder MBS 75 S Page 32
Technical data, see bench grinder TOP 300 Pages 40 - 41
MBS 75 S and TOP 300 mounted on a cabinet 384.705
Extraction integrated in the cabinet is possible
�
�
Price on request
K130
Configuration variants
Technical data, see also direct drive DA 4000 Pages 38 - 39
�
�
�
�
Mounting on machine bed 700 mm long
Retainer here with four-jaw chuck
Rapid adjustment of sliding table using recirculating ball bushing
Cross table mounted on top
Price on request
Attention! Machine must be firmly anchored.
- 8 -
Flottstr. 25 • 56472 Großseifen • Tel. +49 (0)2661/40484 • Fax. +49 (0)2661/40573 • Email: info@kraeku.de • Website: www.kraeku.de
Special solutions
Special solutionsSpecial solutions
Maschinenbau- und Dienstleistungs GmbH
K 155
Configuration variants
Wet separator
�
�
�
�
�
Suction power 450 m /h
Loaded air stream goes over flow separator to the exchanger
(Water bath) and reaches the open air via a secondarz filter
All table machines available in the catalogue can be connected
Also suitable for connection of third party makes
On request, we will take over the mounting and electrical connection
of third party makes
3
Price on request
K 150
Configuration variants
Technical data of the disc grinding machine TSM 600 Pages 18 - 19
Disc sander can be infinitely adjusted for height (working height)
o by hand using crank
o motorised
Complete offer with extraction for wood dust (Pages 78 - 81)
Complete offer for metal dust / wet-dry separator
(Page 81)
�
�
�
Price on request
Attention! Machine must be firmly anchored to the floor.
K 145
Configuration variants
Technical data, see also metal belt grinder MBS 75 S Page 32
Technical data, see also disc sander TSM 300 Pages 16 - 17
�
�
�
�
�
�
Machine cabinet 384.705, metal belt grinder 385.300 (Page 20),
Disc grinding machine 372.151 (Page 8)
With integrated extraction 450 m /h
Infinitely variable speed control per individual unit
Variable abrasive belt length and width
Table extension (AL) possible
Table available without slot and with stainless steel plate
3
Price on request
- 9 -
Flottstr. 25 • 56472 Großseifen • Tel. +49 (0)2661/40484 • Fax. +49 (0)2661/40573 • Email: info@kraeku.de • Website: www.kraeku.de
Special solutions
Maschinenbau- und Dienstleistungs GmbH
Special solutionsSpecial solutions
K 170
Configuration variants
Technical data, see also table belt grinder TBS 75 Pages 30 - 31
�
�
�
�
�
�
�
Narrow belt grinder (here 25 mm)
Retainer in the steel holder of the lathe is possible for pipe machining
Safety cover configuration according to customer desire
Grinding system training according to customer desire
Concave and convex radius rollers are possible
Drive according to choice
Extraction and stands according to customer desire
Price on request
Attention! Machine must be firmly anchored to the floor.
K 165
Configuration options
Technical data, see belt grinder KSM / KOS Pages 24 - 27
Safety cover and extraction according to customer desire
Wide belt grinding machine (here 250 mm)
Oscillating is also possible
Can be adjusted for height using crank or motorised
Controls on swivel arm are possible
Abrasive belt can be adjusted from vertical to horizontal
Power unit can be swivelled around the column axis
Seated working position can be adjusted
Column height according to customer desire
�
�
�
�
�
�
�
�
�
Price on request
Attention! Machine must be firmly anchored to the floor.
K 160
Configuration variants
Technical data, see also belt grinder B 75/150 Pages 34 - 35
�
�
�
�
�
�
�
Steel belt grinder
Belt width 75 and 150 mm
Other belt widths are possible
Extraction at the drive and driven roller is possible
Exhaust air evacuation via water bath is possible
Height and angle adjustment (seating position)
Can be swivelled by 360°
Price on request
Attention! Machine must be firmly anchored to the floor.
- 10 -
Flottstr. 25 • 56472 Großseifen • Tel. +49 (0)2661/40484 • Fax. +49 (0)2661/40573 • Email: info@kraeku.de • Website: www.kraeku.de
Special solutions
Special solutionsSpecial solutions
Maschinenbau- und Dienstleistungs GmbH
K 185
Configuration variants
Technical data, circular saw with sliding surface table
KS 2012 see Pages 62-63
Saw unit as sliding surface table for metal and wood
machining for individual installation in a complete
system
Table made of aluminium
Sliding length 250 mm
Micrometering device can be attached, see also
Page 63
�
�
�
�
Price on request
K 180
Configuration variants
Technical data, circular saw KS 2011, see Pages 60-61
Saw unit for wood and metal for individual installation in a system
Table made of aluminium
Table made of GG
Sliding table can be attached
Table extension is possible
Micrometering device can be attached
�
�
�
�
�
�
Price on request
K 175
Configuration variants
Technical data table belt grinder TBS 75 see Pages 30-31
Grinder for clamping in the steel holder of the lathe
Safety cover according to customer desire
�
�
Price on request
- 11 -
Flottstr. 25 • 56472 Großseifen • Tel. +49 (0)2661/40484 • Fax. +49 (0)2661/40573 • Email: info@kraeku.de • Website: www.kraeku.de
Special solutions
Maschinenbau- und Dienstleistungs GmbH
Special solutionsSpecial solutions
K 195
Configuration variants
Technical data, see bench drill TB K 16 and SB K 23
Pages 50 - 53
Motor capacities as described on Pages 50 - 53
Spindles B12 to MK II
Other speeds on request
Micro metering device can be attached
�
�
�
�
�
�
Capacity according to customer desire
Simultaneous horizontal, vertical, angular drill head
adjustment
Price on request
Attention! Machine must be firmly anchored to the floor.
K 190
Configuration variants
Technical data, see horizontal grinder Page 20
�
�
�
Horizontal disc sander with integrated extraction
Design of safety covers / suction connections and
stops according to customer desire
Operating controls using swivel arm
Price on request
- 12 -
Flottstr. 25 • 56472 Großseifen • Tel. +49 (0)2661/40484 • Fax. +49 (0)2661/40573 • Email: info@kraeku.de • Website: www.kraeku.de
Special solutions
Special solutionsSpecial solutions
Maschinenbau- und Dienstleistungs GmbH
K 215
Configuration variants
Control panel extension arm
Simple and fast mounting on every column and
machine
Working range and swivel range can be adapted to
customer desire
Better and easier handling of the operating controls
�
�
�
Price on request
K 210
Agitator
�
�
�
�
�
�
�
Operating controls following consultation
Speeds 1speed 1500 rpm
2 speed 700/1500 rpm
Infinitely adjustable 700 - 1500 rpm
Motor can be adjusted for height
o by hand using crank
o with electric motor
Motor unit can be swivelled around the column
axis (360°)
Motor shaft can be swivelled from horizontal to vertical
Foot pedal
Emergency Stop
Price on request
Attention! Machine must be firmly anchored to the floor.
K 205
Configuration variants
Roll grinder with individual loading
�
�
�
�
�
�
�
�
Height adjustment of the motor
Adjustment of the working height
Motors with infinitelz adjustable, single or two speeds
Infinite adjustment in inclined position right / left
Roller cover according to requirement
Roller cover with extraction (single, double)
Suction hoods installed
Detachable suction hoods attached
Price on request
Attention! Machine must be firmly anchored to the floor.
- 13 -
Flottstr. 25 • 56472 Großseifen • Tel. +49 (0)2661/40484 • Fax. +49 (0)2661/40573 • Email: info@kraeku.de • Website: www.kraeku.de
Maschinenbau- und Dienstleistungs GmbH
Grinding
Table roll grinder
TOS 3000/S/45°
The roll grinder for
practically all applications
Large table area ensures
secure support of the work
piece.
Faster and easier change
of the abrasive sleeves.
Fitted with suction
connections as standard,
ensures clean work place.
Suction units, see category
>> Extraction <<.
Various abrasive sleeve
diameters guarantee
versatile and precise
working, such as, e.g. the
machining of outside and
inside contours.
Grinding spindle is infinitely
adjustable for height.
Adjustable work table
0 - 45°
�
�
�
�
�
�
Grinding spindle
infinitely adjustable
for height
Suction
connections
Oscillation
stroke
Contour grinding, outside Parallel grinding with longitudinal stop Contour grinding, inside Grinding pockets
Machine type
Table roll grinder
Order No.
Price €:
TOS 3000
370.015
1,185.00
T0S 3000 S
370.017
1,238.00
TOS 3000
S - 45°
370.070
1,545.00
Technical data
Table size 620 x 480 mm
Table tilting -- -- 0 – 45°
Machine height 680 mm 945 mm 965 mm
Oscillation stroke 20 mm
Number of strokes 48 strokes/min.
Idle speed 3000 rpm
Height adjustment of the
grinding spindle50 mm
Spindle holder Ø 12.7 mm
Suction connections Ø 50 mm
Motor power 230V/50Hz 0.55 kW
Weight 34 kg 40 kg 43 kg
Standard equipment
Power cable with plug, suction connections 50 mm, motor protection, 4 reducing
rings, adjustable longitudinal stop,
4 rubber spindles Ø19 – 25 – 38 – 51mm,
5 abrasive sleeves Ø13 – 19 – 25 – 38 – 51mm
TOS 3000
with machine stands
Suction
connections
In the swivel area, only
spindles up to max Ø
38mm can be used.
TOS 3000 S - 45°
- 14 -
Flottstr. 25 • 56472 Großseifen • Tel. +49 (0)2661/40484 • Fax. +49 (0)2661/40573 • Email: info@kraeku.de • Website: www.kraeku.de
Maschinenbau- und Dienstleistungs GmbH
Grinding
Table roll grinder
TWS 3000 / TWS 4000
The roll grinder for practically
all applications
Large table area ensures safe
support of the work piece.
Faster and easier changing of
the spindles and abrasive
sleeves.
Fitted with suction
connections as standard,
ensures clean work place. For
suction units, see the category
>> Extraction <<.
Various abrasive sleeve
diameters ensure versatile and
precise work.
�
�
�
�
Photo> machine stands
Item No.: 491.775
(Extra charge, see
Suction connections
Machine type
Table roll grinder
Order No.
Price €:
TWS 3000 W
373.010
765.00
TWS 3000 D
373.150
820.00
TWS 3000
powertronic
373.152
960.00
Technical data
Table size 510 x 360 mm
Idle speed rpm 3000 600 - 3000
Spindle holder Ø 13 mm
Suction connections Ø 58 mm
Motor power 0.37 kW 1.5 kW
Dimensions (L x W x
H)
540 x 360 x 450 mm
Weight 32 kg 42 kg
Standard
equipment
Power cable, suction connections, reducing connections Ø 50 mm with hose
clip, 5 reducing rings, adjustable longitudinal stop,
5 rubber spindles Ø 19 – 25 – 38 – 51 – 75 mm,
6 abrasive sleeves, grain 80, Ø 13 – 19 – 25 – 38 – 51 – 75 mm.
Accessories (TWS / TOS)Order No. Price €
Machine stand, movable(TOS 3000)
370.016 215.00
Machine stand, movableTWS 3000)
491.775 215.00
Abrasive sleeve cleaner 370.005 10.00
Connecting piece Ø 50/100 mm 370.007 29.00
Sleeve Ø 13x114 mm grain 50, 3 pcs. 370.040 8.00
Sleeve Ø 13x114 mm grain 80, 3 pcs. 370.041 8.00
Sleeve Ø 13x114 mm grain 120, 3 pcs. 370.060 8.00
Rubber spindle Ø19
(Ø13x19x114mm)
370.052 16.00
Sleeve Ø 19x114 mm grain 50, 3 pcs. 370.042 9.00
Sleeve Ø 19x114 mm grain 80, 3 pcs. 370.043 9.00
Sleeve Ø 19x114 mm grain 120, 3 pcs. 370.061 9.00
Rubber spindle Ø25
(Ø13x25x114mm)
370.053 18.00
Sleeve Ø 25x114 mm grain 50, 3 pcs. 370.044 10.00
Sleeve Ø 25x114 mm grain 80, 3 pcs. 370.045 10.00
Sleeve Ø 25x114 mm grain 120, 3 pcs. 370.063 10.00
Rubber spindle Ø38
(Ø13x38x114mm)
370.054 25.00
Sleeve Ø 38x114 mm grain 50, 3 pcs. 370.046 10.00
Sleeve Ø 38x114 mm grain 80, 3 pcs. 370.047 10.00
Sleeve Ø 38x114 mm grain 120, 3 pcs. 370.065 10.00
Rubber spindle Ø51
(Ø13x51x114mm)
370.055 33.00
Sleeve Ø 51x114 mm grain 50, 3 pcs. 370.048 10.00
Sleeve Ø 51x114 mm grain 80, 3 pcs. 370.049 10.00
Sleeve Ø 51x114 mm grain 120, 3 pcs. 370.066 10.00
Rubber spindle Ø75
(Ø13x75x114mm)
370.056 52.00
Sleeve Ø 75x114 mm grain 50, 2 pcs. 370.050 11.00
Sleeve Ø 75x114 mm grain 80, 2 pcs. 370.051 11.00
Only for TWS 3000!}
- 15 -
Flottstr. 25 • 56472 Großseifen • Tel. +49 (0)2661/40484 • Fax. +49 (0)2661/40573 • Email: info@kraeku.de • Website: www.kraeku.de
Maschinenbau- und Dienstleistungs GmbH
Grinding
Disc sander
TSM 300
Machine type
Disc grinder
Oder No.
Price €:
TSM 300S
W
372.210
620.00
TSM 300S
D
372.211
605.00
TSM 300
W
372.151
750.00
TSM 300
D
372.152
690.00
TSM 300
pol.
372.150
920.00
TSM 450
pol.
372.400
1920.00
Technical data
Grinding disc Ø 300 mm 450 mm
Speed 1500 rpm1500 / 3000
rpm
700 / 1500
rpm
Cutting speed 24 m/sec. 23 m/sec.23/46
m/sec.
17/35
m/sec.
Grinding table 460 x 180 mm700 x 300
mm
Tiltable table 0 - 45° -20°/+47°
Suction connections Ø 58 mm Ø 100 mm
Motor power
3-phase 400 V- 1.1 kW - 1.1 kW
0.80 / 1.3
kW2.2 / 3.0 kW
Motor power
AC 230 V0.75 kW - 0.75 kW - - -
Weight 30 kg 40 kg
Standard equipment
Adhesive coating, abrasive coating grain 60 for wood, power cable with CEE connector-Stecker, with Schuko
plug for alternating current.
Photo. TSM 300 with
Grinding disc safety guard
Item No.: 371.165
(Extra cost, see accessories)
TSM300 D
also available
withinfin
itely
variable
control at extra
cost.
Item
No.: 372.154
Photo: TSM 300S
available with mitre stop
as accessory
- 16 -
Flottstr. 25 • 56472 Großseifen • Tel. +49 (0)2661/40484 • Fax. +49 (0)2661/40573 • Email: info@kraeku.de • Website: www.kraeku.de
Disc sander
TSM 300
Maschinenbau- und Dienstleistungs GmbH
Grinding
The versatile, mobile
disc sander
for wood, plastics, steel and
non-ferrous metals
Anodised aluminium
table with large support
surface and T-slots
Table with large support
surface and grooves for
TSM 450
Inclinable table from
0° to 45°
Detachable grinding
table
Sturdy machine body
Adhesive coating for
attaching abrasive paper
Suction connections as
standard
Also available on
request with infinitely
variable speed
Brake as standard for
fast braking of the
grinding disc
�
�
�
�
�
�
�
�
�
Accessories Order No. Price €
Mitre stop 372.260 62.00
Round parts grinding attachment 372.262 83.00
Machine stand 491.775 216.00
Grinding disc safety guard 371.165 42.00
Connecting piece Ø 58/100 370.007 29.00
Abrasive belt cleaner 370.005 10.00
Tools
Adhesive coating Ø 300 mm 372.234 31.00
Abrasive coating, Ø 300 mm, grain 60 for wood/metal (VPE 5
pcs.)
372.236 31.00
Abrasive coating, Ø 300 mm, grain 100 for wood/metal (VPE
5 pcs.)
372.238 31.00
Abrasive coating, Ø 300 mm, grain 120 for wood/metal (VPE
5 pcs.)
372.240 31.00
Abrasive coating, Ø 300 mm, grain 150 for wood/metal (VPE
5 pcs.)
372.241 31.00
TSM 315 until 07/2004
Abrasive coating Ø 315 mm 372.200 30.00
Abrasive coating, Ø 315 mm, grain 60 for wood/metal (VPE 5
St.)
372.202 30.00
Abrasive coating, Ø 315 mm, grain 100 for wood/metal (VPE
5 pcs.)
372.206 30.00
Spray adhesive 372.660 28.00
Abrasive coating, Ø 450 mm, grain 60 for wood/metal (VPE 3
pcs.)
372.550 34.00
Abrasive coating, Ø 450 mm, grain 100 for wood/metal (VPE
3 pcs.)
372.554 32.00
Special solution
Reversible grinding disc, e.g. for diamond coating
(steel disc)Price on request!
Grinding mitresGrinding with round parts grinding attachmentInclinable grinding table 0° to 45°
Mitre bevel grinding with
mitre stop
Round parts grinding with
round parts grinding attachmentEdge grinding
- 17 -
Flottstr. 25 • 56472 Großseifen • Tel. +49 (0)2661/40484 • Fax. +49 (0)2661/40573 • Email: info@kraeku.de • Website: www.kraeku.de
Maschinenbau- und Dienstleistungs GmbH
Grinding
D - TSM 450/600/800
Disc sander
The versatile disc sanders
With electronic brake
for fast braking of the
grinding disc
for wood, plastics, steel and
non-ferrous metals
Table with large support
surface and grooves
Grinding table can be
swivelled
Sturdy machine body
Motor protection with
thermal sensors
Infinitely variable speed
on request
Suction connections as
standard
Clockwise / anticlockwise
operation
Table 50 mm under
centre (better utilisation)
�
�
�
�
�
�
�
�
� Photo: TSM 600 with round parts
grinding attachment and mitre stop.
(Extra charge, see accessories)
Machine type
Disc grinder
Motor:
Order No:
Price €:
TSM 450
1-speed
372.500
2,675.00
TSM 450
2-speed
372.501
3,250.00
TSM 600
1-speed
372.600
3,030.00
TSM 600
2-speed
372.601
4,020.00
TSM 800
1-speed
372.800
6,225.00
Technical data
Grinding disc Ø 450 mm 600 mm 800 mm
Rotation direction Clockwise/anticlockwise Clockwise/anticlockwise Clockwise/anticl
ockwise
Speed 1500 rpm 700/1500 rpm 950 rpm 700/1500 rpm 950 rpm
Cutting speed 35 m/sec. 17/35 m/sec. 30 m/sec. 22/45 m/sec. 30 m/sec.
Grinding table 700 x 300 mm 830 x 300 mm 830 x 300 mm
-20°/+47°
Tiltable table -20°/+47° -20°/+47°
Suction connections 100 mm 100 mm
Motor power 3-phase 400 V 3.0 kW 2.2/3.0 kW 3.0 kW 2.2/3.0 kW 3.0 kW
Weight 120 kg 200 kg 280 kg
Standard equipment
Switch-connector combination, 1 can of spray adhesive, abrasive coating grain 60 for wood/metal,
machine stand
- 18 -
Flottstr. 25 • 56472 Großseifen • Tel. +49 (0)2661/40484 • Fax. +49 (0)2661/40573 • Email: info@kraeku.de • Website: www.kraeku.de
Maschinenbau- und Dienstleistungs GmbH
Grinding
D - TSM 450/600/800
Disc sander
Machine type
Disc grinder
Order No:
Motor:
Price €:
DTSM 450
372.503
2-speed
4,400.00
DTSM 600
372.603
2-speed
5,195.00
DTSM 800
372.803
1-speed
8,225.00
Technical data
Grinding disc Ø 450 mm 600 mm 800 mm
Rotation direction Right/left Right/left Right/left
Speed 700/1500 rpm 700/1500 rpm 650 rpm
Cutting speed 17/35 m/sec. 22/45 m/sec. 22/45 m/sec.
Grinding table 700 x 300 mm 830 x 300 mm 830 x 300 mm
Tiltable table -20°/+47° -20°/+47° -20°/+47°
Suction connections Ø 100 mm Ø 100 mm Ø 100 mm
Motor power 2.2/3.0 kW 2.2/3.0 kW 2.2/3.0 kW
Weight 190 kg 270 kg 300 kg
Photo: DTSM 600 with round parts grinding
attachment and mitre stop.
(Extra charge, see accessories)
Accessories TSM 450 / TSM 600 /
TSM 800Order No. Price €
Mitre stop 372.605 156.00
Round parts grinding attachment 372.570 188.00
Abrasive belt cleaner 370.005 10.00
Tools
Spray adhesive 372.660 28.00
Abrasive coating, Ø 450 mm, grain 60 for
wood/metal (VPE 3 pcs.)*372.550 34.00
Abrasive coating, Ø 450 mm, grain 100 for
wood/metal (VPE 3 pcs.)*372.554 32.00
Abrasive coating, Ø 600 mm, grain 60 for
wood/metal (VPE 3 pcs.)*372.650 39.00
Abrasive coating, Ø 600 mm, grain 100 for
wood/metal (VPE 3 pcs.)*372.654 37.00
Abrasive coating, Ø 800 mm, grain 60 for
wood/metal (VPE 3 pcs.)*372.850 45.00
Abrasive coating, Ø 800 mm, grain 80 for
wood/metal (VPE 3 pcs.)*372.852 45.00
Abrasive coating, Ø 800 mm, grain 100 for
wood/metal (VPE 3 pcs.)*372.854 45.00
*Other grain sizes on request
Suction tube (T-piece)
Subsequent attachment not possible!372.695 95.00Round parts grinding with
round parts grinding attachment
Mitre bevel grinding
with mitre stop
Edge grinding
Photo: TSM 800 with round parts
grinding attachment 372.570 and
mitre stop 372.605.
(Extra charge, see accessories)
Photo: TSM 600 with long table
and infinitely variable speed
control.
Other grinding disc Ø on request
- 19 -
Flottstr. 25 • 56472 Großseifen • Tel. +49 (0)2661/40484 • Fax. +49 (0)2661/40573 • Email: info@kraeku.de • Website: www.kraeku.de
Maschinenbau- und Dienstleistungs GmbH
Grinding
WA 450 / 600
Horizontal grinder
The disc sanding
machines for planing.
Electronic brake for
fast braking of the
grinding disc
for wood, plastics, steel
and non-ferrous metals
Sturdz machine body
Motor protection with
thermal sensors
Infinitely variable
speed on request
Suction connections
as standard
Central extraction in
the machine body
Clockwise /
anticlockwise operation
Diameter 800 mm on
request
�
�
�
�
�
�
�
�
Machine type
Horizontal grinder
Order No:
Price €:
WA 450 D
385.800
2,175.00
WA 450 pol
385.801
2,730.00
WA 600 D
385.804
2,590.00
WA 600 pol
385.805
3,145.00
Technical data
Motor power 3.0 kW 2.2/3.0 kW 3.0 kW 2.2/3.0 kW
Electrical connection 400 V / 16 A 400 V / 16 A
Speed rpm 950 700 / 1500 950 700 / 1500
Rotation direction Right/left Right/left
Grinding disc Ø 450 mm 600 mm
Cutting speed 35 m/sec. 17/35 m/sec. 30 m/sec. 22/45 m/sec.
Suction connections Ø 100 mm Ø 100 mm
Dimensions L x W x H 600 x 660 x 1085 600 x 660 x 1085
Weight 120 kg 120 kg
Standard equipment
Switch-connector combination, 1 can of spray adhesive, abrasive coating, grain 60 for
wood/metal,
Accessories Order No. Price €
Adjustable stop system On request
Prisms for stop system On request
We adapt other additional equipment to your requirements on request.
Tools
Abrasive coating, Ø 600 mm, grain 60 (VPE 3 pcs.) 372.650 39.00
grain 100 (VPE 3 pcs.) 372.654 37.00
Other grain sizes on request
Spray adhesive 372.660 28.00
Photo: horizontal grinder with
adjustable stop system 385.890 and
integrated extraction
(Extra charge, see accessories)
Adjustable stop 45 - 90°
Other grinding disc Ø
on request
- 20 -
Flottstr. 25 • 56472 Großseifen • Tel. +49 (0)2661/40484 • Fax. +49 (0)2661/40573 • Email: info@kraeku.de • Website: www.kraeku.de
WAN 450 / 600
Horizontal wet grinder
Maschinenbau- und Dienstleistungs GmbH
Grinding
The horizontal wet
grinder is particularly
suitable for planing with
the wet grinding
process.
Grinding and
polishing steel / glass
parts
Floor-mounted
machine with solid
welded construction
Precisely ground
aluminium rotary table
Ø 600 mm
Central coolant
supply via a flexible
jointed hose on the
stop system.
Infinitely variable
speed
Motor and electric
parts are installed in
the machine base
protected against
splash water.
Coolant collecting
tray.
All parts are
protected against
corrosion.
�
�
�
�
�
�
�
�
Accessories Order No. Price €
Adjustable stop system On request
Prisms for stop system on request On request
Coolant spraying system
We adapt other additional equipment to your requirements on request.
Tools
Abrasive coating, Ø 600 mm, on request
Machine type
Horizontal wet
grinder
Order No :
Price €:
WAN 450
D
385.900
3,080.00
WAN 450
pol
385.901
On request
WAN 600
D
385.904
3,480.00
WAN 600
pol
385.905
On request
Technical data
Motor power 3.0 kW 2.2/3.0 kW 3.0 kW 2.2/3.0 kW
Electrical connection 400 V / 16 A 400 V / 16 A
Grinding disc Ø 450 mm 600 mm
Dimensions L x W x H 730 x 660 x 1085 730 x 660 x 1085
Weight 120 kg 120 kg
Standard equipment
Switch-connector combination, abrasive coating, grain 60 for wood/metal,
Photo: horizontal wet grinder with
adjustable stop system 385.990 and
integrated coolant spray system
(Extra charge, see accessories)
Stop with 3 adjustable stops.
- 21 -
Flottstr. 25 • 56472 Großseifen • Tel. +49 (0)2661/40484 • Fax. +49 (0)2661/40573 • Email: info@kraeku.de • Website: www.kraeku.de
Maschinenbau- und Dienstleistungs GmbH
Grinding
Belt and disc grinding machine
BTS 150
The belt and disc grinding
machine for schools,
craftsmen, industry and
workshops
Longitudinal stop can be
swivelled and is adjustable up to
45° with scale
Grinding table can be swivelled
and is adjustable up to 45° with
scale
Fitted with suction connections
as standard, ensures a clean
workplace
Motor protection with thermal
sensor
Grinding table with grooves
Stable, vibration-free design
�
�
�
�
�
�
Machine type
Belt and disc grinder
Order No:
Price €:
BTS 150 L
371.000
3,200.00
BTS 150 K
371.200
2,580.00
Technical data
Motor power 2.2/3.0 kW, 400 V
Abrasive belt width 150 mm
Abrasive belt length 2250 mm 1775 mm
Surface grinding area 940 x 150 mm 700 x 150 mm
Belt speed 10/20 m/s
Grinding disc Ø 300 mm
Grinding table support 400 x 2000 mm
Suction connections (both
sides)
2 x Ø 100 mm
Machine dimensions: L/W/H
mm
1100 x 510 x 450
Weight 170 kg 150 kg
Standard equipment
Obe abrasive belt, one adhesive coating and one grinding disc
coating, power cable with plug, padlocable undervoltage release with
emergency stop function. Suction connections
belt side Ø 100 mm, disc side
BTS 150 with grinding roller
and mitre stop.
Extra charge, see accessories
Also available
with
250 mmbelt width.
Price on request.
- 22 -
Flottstr. 25 • 56472 Großseifen • Tel. +49 (0)2661/40484 • Fax. +49 (0)2661/40573 • Email: info@kraeku.de • Website: www.kraeku.de
Maschinenbau- und Dienstleistungs GmbH
Grinding
Belt and disc grinding machine
BTS 150
Accessories Order No. Price €
Mitre stop, adjustable 2x45° for support table 372.260 62.00
Round parts grinding attachment, for support table 372.262 83.00
Connecting piece Ø58/100 mm 370.007 29.00
Extraction integrated in the case On request
Tools
Abrasive belt for wood, 150 x 2250 mm, grain 60, 5 pcs 371.885 38.00
Abrasive belt for wood, 150 x 2250 mm, grain 80, 5 pcs 371.886 38.00
Abrasive belt for wood, 150 x 2250 mm, grain 100, 5 pcs 371.887 38.00
Abrasive belt for metal, 150 x 2250 mm, grain 60, 5 pcs 371.888 65.00
Abrasive belt for metal, 150 x 2250 mm, grain 80, 5 pcs 371.889 65.00
Abrasive belt for metal, 150 x 2250 mm, grain 100, 5 pcs 371.890 65.00
Abrasive belt for wood, 150 x 1775 mm, grain 60, 5 pcs 371.011 35.00
Abrasive belt for wood, 150 x 1775 mm, grain 100, 5 pcs 371.013 35.00
Abrasive belt for metal, 150 x 1775 mm, grain 60, 5 pcs 371.021 58.00
Abrasive belt for metal, 150 x 1775 mm, grain 100, 5 pcs 371.023 58.00
Adhesive coating Ø 300 mm 372.234 31.00
Grinding disc coating for wood/metal Ø 300 mm, grain 60, 5 pcs 372.236 31.00
Grinding disc coating for wood/metal Ø 300 mm, grain 100, 5 pcs 372.238 31.00
Schleifwalze, Ø 80 mm. Länge 120 mm
mit 5 Schleifbelägen sortiert, Schraube und Schlüssel382.800 168.00
Schleifwalzenbeläge für Holz, Ø 80 mm, Korn 60, 5 pcs 382.801 45.00
Schleifwalzenbeläge für Holz, Ø 80 mm, Korn 100, 5 pcs 382.802 45.00
Wandhalter zur sachgemäße Aufbewahrung der Schleifbänder 371.860 92.00
Grinding curves with grinding rollMitre grinding with mitre stopRound parts grinding with round parts
grinding attachment
Freehand round parts grinding Grinding long wood with stop Grinding 45° chamfer on long wood
Photo: wall holder 371.860
(Extra charge, see
accessories)
- 23 -
Flottstr. 25 • 56472 Großseifen • Tel. +49 (0)2661/40484 • Fax. +49 (0)2661/40573 • Email: info@kraeku.de • Website: www.kraeku.de
Maschinenbau- und Dienstleistungs GmbH
Grinding
Edge grinder
KSM 150 / KSM 250
The edge grinder with the wide
grinding surface for machining
wood, plastic and metal
High grinding performance and
uniform grinding surface
Grinding table can be adjusted
for height for optimum utilisation
of the abrasive belt width
Large grinding support surface
Infinitely adjustable inclination
of the horizontal grinding surface
from 0° to 90°
Grinding table with suction
connections for machining
curves
Mitre stop for height-adjustable
grinding table (option)
�
�
�
�
�
�
Photo: KSM 250
Photo: KSM 150
Machining on the rear side
is possible with additional
grinding support
(Extra charge, see
Machine type
Edge grinder
Order No:
Price €:
KSM 150
371.650
1,010.00
KSM 250
372.252
1.345.00
Technical data
Motor power 400 V/50 Hz 1.5 kW 2.2 kW
Abrasive belt width 150 mm 250 mm
Abrasive belt length 2250 mm
Working area 850 x 150 mm
Belt speed 16 m/s
Roller Ø 109 mm
Suction connections Ø 100 mm
Table 150 x 530 mm
Machine dimensions:
L/W/H
1350x470x1000 mm 1350x670x1000 mm
Weight 75 kg 95 kg
Standard equipment
1 abrasive belt, grain 80, longitudinal stop, adjustable transverse stop,
grinding table with suction connections, switch-connector combination with
undervoltage release, motor protection with thermal triggering
Grinding surface can be infinitely
adjusted from 0 to 90°.
Infinitely adjustable angle.
Grinding table infinitely adjustable
for height for full utilisation of the
abrasive belt.
The contact roller is
also
available
rubberised.
(Extracharge, see accessorie
s)
- 24 -
Flottstr. 25 • 56472 Großseifen • Tel. +49 (0)2661/40484 • Fax. +49 (0)2661/40573 • Email: info@kraeku.de • Website: www.kraeku.de
Maschinenbau- und Dienstleistungs GmbH
Grinding
KSM 150 / KSM 250
Edge grinder
Accessories and pricesAccessories KSM 150 Order No. Price €
Disc grinder attachment Ø280 mm, 371.750 230.00
Disc grinder attachment Ø300 mm, (as for TSM 300) 372.153 360.00
Mitre stop 371.795 52.00
Graphite support, 180 x 890 mm 371.884 31.00
Abrasive belt for wood, 150 x 2250 mm, grain 60, 5 pcs. 371.885 38.00
Abrasive belt for wood, 150 x 2250 mm, grain 80, 5 pcs. 371.886 38.00
Abrasive belt for wood, 150 x 2250 mm, grain 100, 5 pcs. 371.887 38.00
Abrasive belt for metal, 150 x 2250 mm, grain 60, 5 pcs. 371.888 65.00
Abrasive belt for metal, 150 x 2250 mm, grain 80, 5 pcs. 371.889 65.00
Abrasive belt for metal, 150 x 2250 mm, grain 100, 5 pcs. 371.890 65.00
Adhesive coating Ø 280 mm 384.170 25.00
Grinding disc coating, Ø280 mm, grain 60, 5 pcs. 384.166 21.00
Grinding disc coating, Ø280 mm, grain 100, 5 pcs. 384.167 21.00
Support table with grinding drum and adjustable longitudinal
stop, suction connections Ø 100 mm incl.
5 rubber spindles Ø 19 - 25 - 38 - 50 - 76 mm
6 abrasive sleeves, grain 80, Ø 13-19-25-38-50-76 x 114 mm
372.130 251.00
Abrasive sleeve cleaner 370.005 10.00
Sleeve Ø 13x114 mm, grain 50, 3 pcs. 370.040 8.00
Sleeve Ø 13x114 mm, grain 80, 3 pcs. 370.041 8.00
Sleeve Ø 13x114 mm, grain 120, 3 pcs. 370.060 8.00
Rubber spindle Ø19 (Ø13x19x114mm) 370.052 16.00
Sleeve Ø 19x114 mm, grain 50, 3 pcs. 370.042 9.00
Sleeve Ø 19x114 mm, grain 80, 3 pcs. 370.043 9.00
Sleeve Ø 19x114 mm, grain 120, 3 pcs. 370.061 9.00
Rubber spindle Ø25 (Ø13x25x114mm) 370.053 18.00
Sleeve Ø 25x114 mm, grain 50, 3 pcs. 370.044 10.00
Sleeve Ø 25x114 mm, grain 80, 3 pcs. 370.045 10.00
Sleeve Ø 25x114 mm, grain 120, 3 pcs. 370.063 10.00
Rubber spindle Ø38 (Ø13x38x114mm) 370.054 25.00
Sleeve Ø 38x114 mm, grain 50, 3 pcs. 370.046 10.00
Sleeve Ø 38x114 mm, grain 80, 3 pcs. 370.047 10.00
Sleeve Ø 38x114 mm, grain 120, 3 pcs. 370.065 10.00
Rubber spindle Ø51 (Ø13x51x114mm) 370.055 33.00
Sleeve Ø 51x114 mm, grain 50, 3 pcs. 370.048 10.00
Sleeve Ø 51x114 mm, grain 80, 3 pcs. 370.049 10.00
Sleeve Ø 51x114 mm, grain 120, 3 pcs. 370.066 10.00
Rubber spindle Ø75 (Ø13x75x114mm) 370.056 52.00
Sleeve Ø 75x114 mm, grain 50, 2 pcs. 370.050 11.00
Sleeve Ø 75x114 mm, grain 80, 2 pcs. 370.051 11.00
Adjustable additional table (270 x 720 mm) 372.140 188.00
Connection cable, with CEE connector inc. phase inverter 488.761 58.00
Accessories KSM 250
Adjustable additional table (270 x 720 mm) 372.140 188.00
Mitre stop 371.795 52.00
Graphite support, 270 x 890 mm 372.718 63.00
Inclinable grinding table
372.120 (Extra charge)
Support table with five different
grinding rolls and adjustable
longitudinal stop
Mitre stop 371.795
Ø 300
Grinding disc attachment TSE
300 372.153. (Extra charge, see
Ø 280
Grinding disc attachment TSE
280 371.750. (Extra charge, see
Ø 280
- 25 -
Flottstr. 25 • 56472 Großseifen • Tel. +49 (0)2661/40484 • Fax. +49 (0)2661/40573 • Email: info@kraeku.de • Website: www.kraeku.de
Edge oscillation grinder
KOS 150 / KOS 250
Maschinenbau- und Dienstleistungs GmbH
Grinding
The oscillation grinder with the
wide grinding surface for
machining wood, plastic and
metal
High grinding performance and
uniform grinding surface
Grinding table can be adjusted
for height for optimum utilisation
of the abrasive belt width
Large grinding support area
Infinitely adjustable angle of the
horizontal grinding surface from
0° to 90°
Grinding table with suction
connections for machining
curves
Mitre stop for height-adjustable
grinding table (option)
�
�
�
�
�
�
Grinding area can be infinitely
adjusted from 0 to 90°.
Oscillation gear motor can be
switched on and off.
Grinding table infinitely adjustable
for height for complete utilisation
of the abrasive belt.
Photo: KOS 250
Photo: KOS 150
Machining on the rear side
is possible with additional
grinding support.
(Extra charge, see
Machine type
Edge oscillation grinder
Order No:
Price €:
KOS 150
372.050
1,760.00
KOS 250
372.250
2,030.00
Technical data
Motor power 400 V/50 Hz 2.2 kW 2.2 kW
Abrasive belt width 150 mm 250 mm
Abrasive belt length 2250 mm
Working area 850 x 150 mm 850 x 250 mm
Belt speed 16 m/s
Oscillation 57 strokes / min.
Roller Ø 109 mm
Suction connections Ø 100 mm
Table - 250 x 530 mm
Machine dimensions: L/W/H 1350x570x1000 mm 1350x670x1000 mm
Weight 95 kg 115 kg
Standard equipment
1 abrasive belt, grain 80, longitudinal stop, adjustable transverse stop, grinding
table with suction connections, switch-connector combination with undervoltage
release, motor protection with thermal triggering
Mit
oszillierendem
Schleifband
The contact roller is
also
available
rubberised.
(Extracharge, see accessorie
s).
- 26 -
Flottstr. 25 • 56472 Großseifen • Tel. +49 (0)2661/40484 • Fax. +49 (0)2661/40573 • Email: info@kraeku.de • Website: www.kraeku.de
KOS 150 / KOS 250
Edge oscillation grinder
Maschinenbau- und Dienstleistungs GmbH
Grinding
Mitre stop 371.795
Adjustable additional table
372.140
Support table with five different
grinding rolls and adjustable
longitudinal stop
Accessories KOS 150 Order No. Price €
Mitre stop 371.795 52.00
Graphite support, 180 x 890 mm 371.884 31.00
Abrasive belt for wood, 150 x 2250 mm, grain 60, 5 pcs. 371.885 38.00
Abrasive belt for wood, 150 x 2250 mm, grain 80, 5 pcs. 371.886 38.00
Abrasive belt for wood, 150 x 2250 mm, grain 100, 5 pcs. 371.887 38.00
Abrasive belt for metal, 150 x 2250 mm, grain 60, 5 pcs. 371.888 65.00
Abrasive belt for metal, 150 x 2250 mm, grain 80, 5 pcs. 371.889 65.00
Abrasive belt for metal, 150 x 2250 mm, grain 100, 5 pcs. 371.890 65.00
Support table with grinding drum and adjustable
longitudinal stop, suction connections Ø 100 mm incl.
5 rubber spindles Ø 19 - 25 - 38 - 50 - 76 mm
6 abrasive sleeves, grain 80, Ø 13-19-25-38-50-76 x 114
mm
372.130 251.00
Abrasive sleeve cleaner 370.005 10.00
Sleeve Ø 13x114 mm, grain 50, 3 pcs. 370.040 8.00
Sleeve Ø 13x114 mm, grain 80, 3 pcs. 370.041 8.00
Sleeve Ø 13x114 mm, grain 120, 3 pcs. 370.060 8.00
Rubber spindle Ø19 (Ø13x19x114mm) 370.052 16.00
Sleeve Ø 19x114 mm, grain 50, 3 pcs. 370.042 9.00
Sleeve Ø 19x114 mm, grain 80, 3 pcs. 370.043 9.00
Sleeve Ø 19x114 mm, grain 120, 3 pcs. 370.061 9.00
Rubber spindle Ø25 (Ø13x25x114mm) 370.053 18.00
Sleeve Ø 25x114 mm, grain 50, 3 pcs. 370.044 10.00
Sleeve Ø 25x114 mm, grain 80, 3 pcs. 370.045 10.00
Sleeve Ø 25x114 mm, grain 120, 3 pcs. 370.063 10.00
Rubber spindle Ø38 (Ø13x38x114mm) 370.054 25.00
Sleeve Ø 38x114 mm, grain 50, 3 pcs. 370.046 10.00
Sleeve Ø 38x114 mm, grain 80, 3 pcs. 370.047 10.00
Sleeve Ø 38x114 mm, grain 120, 3 pcs. 370.065 10.00
Rubber spindle Ø51 (Ø13x51x114mm) 370.055 33.00
Sleeve Ø 51x114 mm, grain 50, 3 pcs. 370.048 10.00
Sleeve Ø 51x114 mm, grain 80, 3 pcs. 370.049 10.00
Sleeve Ø 51x114 mm, grain 120, 3 pcs. 370.066 10.00
Rubber spindle Ø75 (Ø13x75x114mm) 370.056 52.00
Sleeve Ø 75x114 mm, grain 50, 2 pcs. 370.050 11.00
Sleeve Ø 75x114 mm, grain 80, 2 pcs. 370.051 11.00
Adjustable additional table (270 x 720 mm) 372.140 188.00
Connection cable, 3 m, with CEE connector including
phase inverter488.761 58.00
Accessories KOS 250
Adjustable additional table (270 x 720 mm) 372.140 188.00
Mitre stop 371.795 52.00
Graphite support, 270 x 890 mm 372.718 63.00
Abrasive belt for wood/metal 250x2250 mm, grain 60, 5
pcs.
372.254115.00
Abrasive belt for wood/metal 250x2250 mm, grain 80, 5
pcs.
372.256115.00
Accessories and prices
- 27 -
Flottstr. 25 • 56472 Großseifen • Tel. +49 (0)2661/40484 • Fax. +49 (0)2661/40573 • Email: info@kraeku.de • Website: www.kraeku.de
Edge grinder
KSM 650 / KOS 650
Maschinenbau- und Dienstleistungs GmbH
Grinding
Our new design top class edge grinder with a lot
of convenience and child’s play to use.
For schools, workshops, craftsmen and industry.
Infinitely adjustable grinding surface from the
horizontal 0° to the vertical 90° position.
Precisely adjustable using a large angle scale and
reliably adjustable in every desired position.
The simple folding down of the suction hood
makes the grinding through of very long work
pieces possible in every abrasive belt position.
Convex guide rollers ensure exact running of the
abrasive belt.
Completely closed machine case above the
guide rollers and bottom side of the abrasive belt
with 2 integrated suction connections ensure
clean and safe working.
Grinding table made of anodised aluminium can
be infinitely adjusted horizontally and vertically -
precisely guided via recirculating ball bushing -
with T-slot for holding mitre angle and longitudinal
stop. The possible horizontal adjustment of the
grinding table guarantees the complete utilisation
of the width of the abrasive belt. With an inclined
grinding surface, the vertical adjustment also
makes possible bringing the grinding surface
close to the abrasive belt. This makes grinding
small cross sections possible and prevents the
work piece tipping.
The use of very high quality and robust parts
ensures high running smoothness, precise work
pieces and a long service life.
�
�
�
�
�
�
Grinding table adjustable on all
sides. Precisely guided via
recirculating ball bushing.
Optimum support of the work
pieces using deliverable grinding
Fold-down suction hoods for grinding through longer work pieces.
Photo: Kedge oscillation grinder
KOS 650
With
oscillating
abrasive belt
Type machine
Edge grinder
Order No:
Price €:
KSM 650 D
385.000935.00
KSM 650 W
385.001
935.00
KOS 650 D
oscillating
385.002
1,555.00
Technical data
Motor power1,5 kW
400 V
1,5 kW
230 V
2,2 kW
230/400 V
Oscillation sans 48 strokes /min
Abrasive belt width 150 mm
Abrasive belt length 1775 mm
Surface grinding area 650 x 150 mm
Belt speed 15 m/s
Speed 2850 min-1
Grinding table support 580 x 280 mm
Roller Ø 100 mm
Suction connections 2 x Ø 100 mm
Weight, without stand 68 kg 98 kg
Weight, with stand 100 kg 130 kg
Machine dimensions: L/W/H 1100 x 510 x 450 mm
Standard equipment
1 abrasive belt grain 80, (371.011), switch-connector combination with
undervoltage release
- 28 -
Flottstr. 25 • 56472 Großseifen • Tel. +49 (0)2661/40484 • Fax. +49 (0)2661/40573 • Email: info@kraeku.de • Website: www.kraeku.de
KSM 650 / KOS 650
Edge grinder
Maschinenbau- und Dienstleistungs GmbH
Grinding
Accessories KSM 650 Order No. Price €
Machine stand 385.008 205.00
Mitre stop 372.260 62.00
Connection cable, 3 m ,
with CEE connector, including phase inverter488.761 58.00
Graphite support, 150 x 650 mm 371.884 31.00
Abrasive belt for wood, 150 x 1775 mm, grain 60, 5 pcs. 371.011 35.00
Abrasive belt for wood, 150 x 1775 mm, grain 100, 5 pcs. 371.013 35.00
Abrasive belt for metal 150 x 1775 mm, grain 60, 5 pcs. 371.021 58.00
Abrasive belt for metal 150 x 1775 mm, grain 100, 5 pcs. 371.023 58.00
Wall holder for proper storage of the abrasive belts 371.860 92.00
Support table with grinding drum and adjustable
longitudinal stop, suction connections Ø 100 mm incl.
5 rubber spindles Ø 19 - 25 - 38 - 51 - 75 mm
6 abrasive sleeves, grain 80, Ø 13 - 19 - 25 - 38 - 51 - 75
mm
385.009 250.00
Sleeve Ø 13x114 mm, grain 50, 3 pcs. 370.040 8.00
Sleeve Ø 13x114 mm, grain 80, 3 pcs. 370.041 8.00
Sleeve Ø 13x114 mm, grain 120, 3 pcs. 370.060 8.00
Rubber spindle Ø19 (Ø13x19x114mm) 370.052 16.00
Sleeve Ø 19x114 mm, grain 50, 3 pcs. 370.042 9.00
Sleeve Ø 19x114 mm, grain 80, 3 pcs. 370.043 9.00
Sleeve Ø 19x114 mm, grain 120, 3 pcs. 370.061 9.00
Rubber spindle Ø25 (Ø13x25x114mm) 370.053 18.00
Sleeve Ø 25x114 mm, grain 50, 3 pcs. 370.044 10.00
Sleeve Ø 25x114 mm, grain 80, 3 pcs. 370.045 10.00
Sleeve Ø 25x114 mm, grain 120, 3 pcs. 370.063 10.00
Rubber spindle Ø38 (Ø13x38x114mm) 370.054 25.00
Sleeve Ø 38x114 mm, grain 50, 3 pcs. 370.046 10.00
Sleeve Ø 38x114 mm, grain 80, 3 pcs. 370.047 10.00
Sleeve Ø 38x114 mm, grain 120, 3 pcs. 370.065 10.00
Rubber spindle Ø51 (Ø13x51x114mm) 370.055 33.00
Sleeve Ø 51x114 mm, grain 50, 3 pcs. 370.048 10.00
Sleeve Ø 51x114 mm, grain 80, 3 pcs. 370.049 10.00
Sleeve Ø 51x114 mm, grain 120, 3 pcs. 370.066 10.00
Rubber spindle Ø75 (Ø13x75x114mm) 370.056 52.00
Sleeve Ø 75x114 mm, grain 50, 2 pcs. 370.050 11.00
Sleeve Ø 75x114 mm, grain 80, 2 pcs. 370.051 11.00
Abrasive sleeve cleaner 370.005 10.00
Dust extractor see category >>Extraction<<
Accessories and prices
Mitre stop for T-slot,
2 x 45 ° adjustable. (Accessories)
Item No. 372.260
With oscillation.
(Only for KOS 650)
Support table with five different
grinding rolls and adjustable
longitudinal stop. (Accessories)
Photo: KSM 650 with machine
stands.
Photo: wall holder
- 29 -
Flottstr. 25 • 56472 Großseifen • Tel. +49 (0)2661/40484 • Fax. +49 (0)2661/40573 • Email: info@kraeku.de • Website: www.kraeku.de
Table belt grinder
TBS 75 / BTS 75
Maschinenbau- und Dienstleistungs GmbH
Grinding
Machine type
Table belt grinder
Order No.
Price €:
TBS 75 D
385.100
1,895.00
BTS 75 D
385.105
1,435.00
Technical data
Three-phase 400V / 50 Hz 2.2 kW 2.2 kW
Belt length 1495 mm
Belt width 75 mm
Belt speed 16 m/s
Surface grinding area 75 x 425 mm
Suction connections Ø 50
Drive roller Ø 200
Driven roller Ø 100
Weight 90 kg
Optional
Grinding disc Ø -- Ø 300 mm
Cutting speed -- 24 m/s
Grinding table size -- 460 x 180 mm
Tiltable table -- 0-45°
Suction connections -- Ø 50 mm
Standard equipment
1 abrasive disc 75x1495 mm, grain 80, power cable with plug,
undervoltage release and emergency stop function.
The robust grinder for the demanding
professional.
Grinding arm can be swivelled,
adjustable from 0° to 90°
Motor protection with thermal sensor
Stable, vibration-free and extremely low
noise
Designed according to international
standards and regulations
High performance (2.2 kW) for industrial
use
Can be used universally using
replaceable grinding media
Suitable for surface and contact grinding
and conventional grinding
Versatility due to wide range of available
accessories.
Suction connections Ø 58 mm as
standard
Possible extraction with SAS 900, see
category >>Extraction<<
�
�
�
�
�
�
�
�
�
�
Photo: Ttable belt grinder ,TBS 75
with 2 grinding arms 385.108 and
385.109,
Belt cover 385.158, 385.159
Accessories:
Photo: belt and disc grinder with one grinding
arm 385.109 and a grinding disc attachment
TSE 300, 330.003
Belt cover 385.158, and one grinding disc attachment
TSE 300, 372.153
BTS 75
Accessories:
Photo: belt and wire brush grinder
with wire brush Ø 300 mm
Prices on request
- 30 -
Flottstr. 25 • 56472 Großseifen • Tel. +49 (0)2661/40484 • Fax. +49 (0)2661/40573 • Email: info@kraeku.de • Website: www.kraeku.de
Table belt grinder
TBS 75 / BTS 75
Maschinenbau- und Dienstleistungs GmbH
Grinding
Accessories and pricesAccessories Order No. Price €
Graphite support 100 x 460mm 385.138 38.00
Belt cover, left 385.158 75.00
Belt cover, right 385.159 75.00
Abrasive belt for metal, 75 x 1495mm, grain 60, 5 pcs. 371.147 50.00
Abrasive belt for metal, 75 x 1495mm, grain 80, 5 pcs. 371.148 48.00
Abrasive belt for metal, 75 x 1495mm, grain 120, 5 pcs. 371.149 46.00
Abrasive belt for wood, 75 x 1495mm, on request
Wall holder for proper storage of the belts 371.860 92.00
Disc grinder attachment TSE 300 330.003 360.00
Mitre stop for TSE 300 372.260 62.00
Round parts grinding attachment for TSE 300 372.262 83.00
Adhesive coating Ø 300 mm for TSE 300 372.234 31.00
Abrasive coating, Ø 300 mm, grain 60, (VPE 5 pcs.) 372.236 31.00
Abrasive coating, Ø 300 mm, grain 100, (VPE 5 pcs.) 372.238 31.00
Abrasive coating, Ø 300 mm, grain 120, (VPE 5 pcs.) 372.240 31.00
Abrasive coating, Ø 300 mm, grain 150, (VPE 5 pcs.) 372.241 31.00
Abrasive disc cleaner 370.005 10.00
Machine stand 384.705 265.00
Wet separator 386.100 1,680.00
Dust extractor SAS 900 D 483.200 1,020.00
Dust extractor SAS 900 W 483.201 1,020.00
Mitre stop 372.260 and round parts
grinding attachment 372.262
Schleifen von Gehrungen
Grinding with round parts grinding attachment
Inclinable grinding table 0° to 45°
Photo:
Belt grinder TBS 75 with
vacuum extractor SAS 900.
KRÄKU
SAS 900
TBS 75
Machine stand 384.705
Photo: BDS 300 with one swivelling
grinding arm 0 - 90° and a grinding
stone Ø 300 mm
Photo: double disc grinder
(Price on request)
Photo: wet separator 386.100
(Extra charge, see
accessories)
Photo: wall holder 371.860
- 31 -
Flottstr. 25 • 56472 Großseifen • Tel. +49 (0)2661/40484 • Fax. +49 (0)2661/40573 • Email: info@kraeku.de • Website: www.kraeku.de
MBS 75 S
Metal belt grinder
Maschinenbau- und Dienstleistungs GmbH
Grinding
The small one for details.
“Made in Germany”
Simple and comfortable handling.
Vibration-free operation due to solid
construction and fixed stand for the
best working results.
Standard configuration with
suction connections
Contact and surface grinding
Adjustable grinding arm
The MBS 75 S is suitable for all
commercially available types of belts
two
�
�
�
�
�
�
Machine type
Metal belt grinder
Order No.:
Price €:
MBS 75 S
W
385.300
695.00
MBS 75 S
D
385.303
640.00
MBS 75 S
pol.
385.306
745.00
Technical data
Motor, 230 V / 50 Hz 0.75 kW ------ ------
Motor, 400V / 50 Hz ------ 1.1 kW 0.8 / 1.3 kW
Speed1500 rpm 1500 rpm 1500 / 2850
rpm
Belt speed 23 m/sec. 23 / 46 m/sec.
Belt length 1000 mm
Belt width 75 mm
Surface grinding area 270 mm
Suction connections 2 x Ø 50 mm
Weight 45 kg 45 kg 50 kg
Standard equipment
Switch-connector combination with undervoltage release with emergency
stop function, quality abrasive belt 75 x 1000 mm, grain 60, lockable
undervoltage release with emergency stop function,
Photo: metal belt grinder
MBS 75 S
Photo: MBS 75 S with vacuum
extractor SAS 900 (483.200)
(Extra charge, see
accessories)
Photo: MBS 75 S with
stand (350.435)
(Extra charge, see
accessories)
Accessories Order No. Price €
Graphite support for MBS 75 S, 75 x 270 mm 385.409 22.00
Stand with water tank 350.435 168.00
Extractor (see category >>Extraction<<)
Tools
Abrasive belt for metal, 75 x 1000 mm, grain 40, 5 pcs. 371.410 22.00
Abrasive belt for metal, 75 x 1000 mm, grain 60, 5 pcs. 371.411 22.00
Abrasive belt for metal, 75 x 1000 mm, grain 80, 5 pcs. 371.412 22.00
Abrasive belt for metal, 75 x 1000 mm, grain 100, 5 pcs. 371.413 22.00
Abrasive belt for metal, 75 x 1000 mm, grain 120, 5 pcs. 371.414 22.00
Abrasive belt for metal, 75 x 1000 mm, grain 150, 5 pcs. 371.415 22.00
Wall holder for proper storage of the abrasive belts 371.860 92.00
Accessories and prices
- 32 -
Flottstr. 25 • 56472 Großseifen • Tel. +49 (0)2661/40484 • Fax. +49 (0)2661/40573 • Email: info@kraeku.de • Website: www.kraeku.de
Maschinenbau- und Dienstleistungs GmbH
Grinding
Machine type Order No. Price €
Combo 2
Consisting of: TSM 450 (372.503); TBS 75 (385.100)385.370 3,995.00
Dust extractor see category >>Extraction<<
Tools
Abrasive belt for metal, 75 x 1495 mm, grain 60, 5 pcs. 371.147 50.00
Abrasive belt for metal, 75 x 1495 mm, grain 80, 5 pcs. 371.148 48.00
Abrasive belt for metal, 75 x 1495 mm, grain 120, 5 pcs. 371.149 45.00
Wall holder for proper storage of the abrasive belts 371.860 92.00
Abrasive coating, Ø 450 mm, grain 60 for wood/metal 5 pcs. 372.550 34.00
Abrasive coating, Ø 450 mm, grain 100 for wood/metal 5 pcs. 372.554 32.00
Spray adhesive 372.660 28.00
Accessories and prices
Combo 2
Machine type Order No. Price €
Combo 1
Consisting of: MBS 75 S (385.300) ; TSM 300 (372.152) and cabinet
(373.011)
385.360 1,650.00
Extractor (integrated in machine cabinet) 385.410 530.00
Dust bag 371.102 65.00
Tools
Abrasive belt for metal, 75 x 1000 mm, grain 40, 5 pcs. 371.410 22.00
Abrasive belt for metal, 75 x 1000 mm, grain 60, 5 pcs. 371.411 22.00
Abrasive belt for metal, 75 x 1000 mm, grain 80, 5 pcs. 371.412 22.00
Abrasive belt for metal, 75 x 1000 mm, grain 100, 5 pcs. 371.413 22.00
Abrasive belt for metal, 75 x 1000 mm, grain 120, 5 pcs. 371.414 22.00
Abrasive belt for metal, 75 x 1000 mm, grain 150, 5 pcs. 371.415 22.00
Wall holder for proper storage of the abrasive belts 371.860 92.00
Adhesive coating, Ø 300 mm 372.234 31.00
Abrasive coating, Ø 300 mm, grain 60 f wood/metal(VPE 5 pc) 372.236 31.00
Abrasive coating, Ø 300 mm, grain 100 f wood/metal(VPE 5pc) 372.238 31.00
Abrasive coating, Ø 300 mm, grain 120 f wood/metal(VPE 5pc) 372.240 31.00
Abrasive coating, Ø 300 mm, grain 150 f wood/metal(VPE 5pc) 372.241 31.00
Accessories and pricesOther
configurations
accordingto
your
requirements
onrequest
Other
configurations
accordingto
your
requirements
onrequest
Combo 1
- 33 -
Flottstr. 25 • 56472 Großseifen • Tel. +49 (0)2661/40484 • Fax. +49 (0)2661/40573 • Email: info@kraeku.de • Website: www.kraeku.de
B 75 / 150
Metal belt grinder
Maschinenbau- und Dienstleistungs GmbH
Grinding
Machine type
Metal belt grinder
incl. machine stand
Order No.:
Price €:
B 75
1-speed
385.400
960.00
B 75
2-speed
385.401
1,120.00
B 75
variable
385.402
1,840.00
B 150
1-speed
385.500
1,350.00
B 150
2-speed
385.501
1,480.00
B 150
variable
385.502
2,170.00
Technical data
Motor, 400V / 50 Hz 4.0 kW 2.8 / 4.0 kW 3.0 kW 4.0 kW 2.8 / 4.0 kW 3.0 kW
Speed1500
rpm
1500 / 3000
rpm
1000 – 3000
rpm
3000
rpm
1500 / 3000
rpm
1000 – 3000
rpm
Belt length 2000 mm 2000 mm
Belt width 75 mm 150 mm
Contact wheel / drive wheel Ø 200 x 75 mm Ø 200 x 150 mm
Surface grinding area 550 mm 550 mm
Belt speed15
m/sec
15 / 30
m/sec
10 – 30
m/sec
15
m/sec
15 / 30
m/sec
10 – 30
m/sec
Suction connections Ø 100 Ø 100
Dimensions (LxWxH) 912 x 460 x 1050 mm 912 x 460 x 1050 mm
Working height 600 to 1100 mm 600 to 1100 mm
Weight 110 kg 130 kg
Standard equipment
Connection cable with CEE connector, quality abrasive belt grain 60, lockable undervoltage release with emergency
stop function, steel support plate with spark box, spark guard, machine stand
High quality belt grinder for
industry and craftsmen.
Convincing arguments for quality,
performance and price.
Simple and confortable operation. Also
mobile if desired.
Multifunctional using special
attachments.
Vibration-free operation due to solid
construction and fixed stand for the best
working results.
Large dimensioned surface grinding
area
Standard configuration with central
suction connections
Safety switch with motor protection and
undervoltage release
4.0 kW motor
Contact and surface grinding
Adjustable working height
Contact disc with ELAX GOR coating
The B 75/150 is suitable for all
commercially available types of belts and
�
�
�
�
�
�
�
�
�
�
�
Photo: B 75 with integrated extractor 385.410
(Extra charge, see accessories)
- 34 -
Flottstr. 25 • 56472 Großseifen • Tel. +49 (0)2661/40484 • Fax. +49 (0)2661/40573 • Email: info@kraeku.de • Website: www.kraeku.de
Metal belt grinder
B 75 / 150
Maschinenbau- und Dienstleistungs GmbH
Grinding
Accessories Order No. Price €
Graphite support for B 75, 90 x 550 mm 385.409 22.00
Graphite support for B 150, 170 x 550 mm 385.509 31.00
Longitudinal stop 371.250 150.00
Chamfer grinding attachment 371.155 152.00
Round parts grinding attachment 371.365 915.00
Support 371.367 286.00
Trolley with 4 lowerable wheels for B 75 / B 150 467.773 376.00
Extractor ASL 300 (external) 371.101 435.00
Dust bag 371.102 65.00
Extractor SAS 900 (integrated in the machine stand) 385.410 530.00
Suction hose made of aluminium Ø 100,
front or rear including mounting, each385.412 62.00
Tools B 75
Abrasive belt for metal, 75 x 2000 mm, grain 40, 5 pcs. 371.150 46.00
Abrasive belt for metal, 75 x 2000 mm, grain 80, 5 pcs. 371.152 46.00
Abrasive belt for metal, 75 x 2000 mm, grain 120, 5 pcs 371.154 46.00
Abrasive belts for stainless steel and grey cast iron
Abrasive belt for metal, 75 x 2000 mm, grain 40, 5 pcs. 371.824 57.00
Abrasive belt for metal, 75 x 2000 mm, grain 80, 5 pcs. 371.826 57.00
Abrasive belt for metal, 75 x 2000 mm, grain 120, 5 pcs. 371.827 57.00
Tools B 150
Abrasive belt for metal, 150 x 2000 mm, grain 40, 5 pcs. 371.125 65.00
Abrasive belt for metal, 150 x 2000 mm, grain 80, 5 pcs. 371.127 65.00
Abrasive belt for metal, 150 x 2000 mm, grain 120, 5 pcs. 371.129 65.00
Abrasive belts for stainless steel and grey cast iron
Abrasive belt for metal, 150 x 2000 mm, grain 40, 5 pcs. 371.828 85.00
Abrasive belt for metal, 150 x 2000 mm, grain 80, 5 pcs. 371.830 85.00
Abrasive belt for metal, 150 x 2000 mm, grain 120, 5 pcs. 371.831 85.00
Wall holder for proper storage of the abrasive belts 371.860 92.00
Accessories and prices
Photo: B 75 with
chamfer deburring attachment 371.155
(Extra charge, see accessories)
Round parts grinding attachment
for grinding and polishing straight round bars made of metal,
steel and stainless steel.
Cab universally adjusted for grinding Ø 20 to 100 mm of
unlimited length
Long bars need support using a support for optimum
guidance.
Manual infinitely adjustable feeder for optimum surface results
Fast and powerful grinding
�
�
�
�
Photo: B 75 with
round parts grinding attachment
371.365 with support
371.367.
(Extra charge, see accessories) Photo: B 150 with adjustable longitudinal stop 371.250 and external
extractor ASL300 371.101 (Extra charge, see accessories)
Photo: wall holder 371.860
(Extra charge, see accessories)
- 35 -
Flottstr. 25 • 56472 Großseifen • Tel. +49 (0)2661/40484 • Fax. +49 (0)2661/40573 • Email: info@kraeku.de • Website: www.kraeku.de
FES 180
Chamfer deburring grinder
Maschinenbau- und Dienstleistungs GmbH
Grinding
The chamfer deburring grinder
from KRÄKU for deburring and
chamfering metal, plastic and
non/ferrous metalsInfinitely variable speed
adjustment depending on the
material steel / stainless steel / non-
ferrous metals / plastics
Work in the performance range of
the sanding brush plate
Completely isolated grinding disc,
high safety at the workplace
Two suction connections as
standard, cleanliness at the
workplace, health precaution
Extraction possible with SAS 900,
see category >>Extraction<<
Good stability of the machine due
to solid industrial quality
�
�
�
�
�
�
Accessories Order No. Price €
Sanding brush plate Ø 180 mm, grain
60
330.177 24.00
Sanding brush plate Ø 180 mm, grain
80
330.178 24.00
Sanding brush plate Ø 180 mm, grain
120
330.179 24.00
Machine stand without extractor 350.435 168.00
Dust extractor SAS 900
see category >>Extraction<<483.200 1,020.00
Optimum speed for every material
Easy changing of the sanding
brush plate or abrasive coatings
Easy speed adjustment using
rotary knob
Easy, safe chamfering of small
work pieces as well
Machine type
Chamfer deburring
grinder
Order No.
Price €:
FES 180 D
330.243
725.00
FES 180
electronic
330.242
830.00
Technical data
Table width 180 mm
Table length 500 mm
Grinding disc Ø 180
Speed3000
rpm
800-7000 rpm
Infinitely variiable
Motor power 1.5 kW 400 V 1.1 kW 230 V
Suction connections Ø 50 mm
Weight 37 kg
Standard equipment
1 sanding brush plate grain 80, power cable with plug.
Infinitely variablespeed
- 36 -
Flottstr. 25 • 56472 Großseifen • Tel. +49 (0)2661/40484 • Fax. +49 (0)2661/40573 • Email: info@kraeku.de • Website: www.kraeku.de
FES 300
Chamfer deburring grinder
Maschinenbau- und Dienstleistungs GmbH
Grinding
Chamfer deburring grinder
for chamfering and deburring metal, wood,
plastic and non-ferrous metals
Completely isolated grinding disc,
high safety at the workplace
Two suction connections as
standard, cleanliness at the
workplace, health precaution
Extraction possible with SAS 900,
see category
Good stability of the machine due to
solid industrial quality
Robust, strong motor with quiet and
low vibration operation
>>Extraction<<
�
�
�
�
�
Precise chamfering of work pieces on
all sides.
Infinitely adjustable guides for
determining the chamfer thickness
Easy changing of the abrasive coatings
with adhesive coating
Accessories Order No. Price €
Adhesive coating Ø 300 mm 372.234 31.00
Grinding disc coating for wood/metal,
Ø 300 mm grain 60, 5 pcs.372.236 31.00
Grinding disc coating for wood/metal,
Ø 300 mm grain 100, 5 pcs.372.238 31.00
Grinding disc coating for wood/metal,
Ø 300 mm grain 120, 5 pcs.372.240 31.00
Grinding disc coating for wood/metal,
Ø 300 mm grain 150, 5 pcs.372.241 31.00
Machine stand without extractor 350.435 168.00
Connection cable, 3 m with CEE
connector including phase inverter488.761 58.00
Power cable, 3 m long, AC 488.762 55.00
Dust extractor SAS 900
see category >>Extraction<<483.200 1,020.00
Machine type
Chamfer deburring
grinder
Order No.
Price €:
FES 300 D
330.240
730.00
FES 300 W
330.241
780.00
Technical data
Table width 180 mm
Table length 500 mm
Grinding disc Ø 300
Speed 3000 rpm
Motor power 1.5 kW 400 V 1.1 kW 230 V
Suction connections 50 mm
Weight 37 kg
Standard equipment
1 adhesive coating with abrasive coating grain , switch-connector
combination.
- 37 -
Flottstr. 25 • 56472 Großseifen • Tel. +49 (0)2661/40484 • Fax. +49 (0)2661/40573 • Email: info@kraeku.de • Website: www.kraeku.de
Direct drive
DA 4000 / 5000
Maschinenbau- und Dienstleistungs GmbH
Grinding
» » »
�
�
�
�
�
Flexible Universal Fast
Grinding
Deburring
Cutting
Rust removal
Controlling
!
Drive units for everything which
turns, with electronic infinitely
variable speed control.
�
�
�
�
�
Polieren
Bohren
Reinigen
Rühren
Antreiben
Machine type
Direct drive
Order No.
Price €:
DA 4000
powertronic
385.252935.00
DA 5000
powertronic
385.2501,595.00
Technical data
Motor powerAlternating current
230 V / 1.1 kW
Three-phase *
230 V / 1.5 kW
Spindle speeds340 - 4000 rpm
Infinitely variable
400 – 5000 rpm
Infinitely variable
Centre height 200 mm
Spindle holder, right M33 DIN 800 / (outside)
MK II / (inside)
Spindle holder, left Ø 20 mm, M16 left
Weight 30 kg
Standard equipment
Power cable with Schuko plug, spindle safety guard, operating tool
* Connection 230 Volt AC with electronic conversion to 3-phase current
Photo: DA 4000 with TSE 300, 372.153
and grinding arm.
(Extra charge, see accessories)
L1
L3 L4L2
D1 D3 M1
D1 = Ø44 mm
L1 = max. 216 mm
L2 = min. 48 mm
Adapter overview
Special adapter, right
Special adapter, left
L1
L3L4 L2
D1D3M1
D1 = Ø38 mm
L1 = max. 216 mm
L2 = min. 75 mm
1
2
3
4
5 6
7 / 12
8
9
10
11
(Grinding material not in the product range)
Photo:
DA 5000 on 3/part cabinet,
suction hood and short machine bed.
Photo: DA 5000 with machine bed 700 mm
special adapter 384.891 and
four-jaw chuck 384.752
(extra charge, see accessories)
- 38 -
Flottstr. 25 • 56472 Großseifen • Tel. +49 (0)2661/40484 • Fax. +49 (0)2661/40573 • Email: info@kraeku.de • Website: www.kraeku.de
Direct drive
DA 4000 / 5000
Maschinenbau- und Dienstleistungs GmbH
Grinding
Photo: DA 5000
with safety covers left
and right,
Dust extractor SAS 900,
Special adapters and tool.
(Extra charge, see accessories)
Photo:DA 5000
with grinding arm 384.100 left and special
adapter >>12<< with rubber spindle and
abrasive sleeve right. Special adapters
and abrasive sleeves, see Page 15
(TWS/TOS)
(Extra charge, see accessories)
Accessories and prices
Accessories: Attachment: R=right, L= left Best.-Nr. Preis €
Machine stand, weight 71 kg 384.705 265.00
Cabinet with 3 lockable doors 373.011 295.00
Dust extractor SAS 900 483.200 1,020.00
Machine bed, 700 mm (other lengths possible) 384.700 190.00
Disc grinder attachment TSE 300 372.153 360.00
Mitre stop for disc grinder attachment 372.260 62.00
Round parts grinding attachment for disc grinder 372.262 83.00
Fixing flange for three and four-jaw chucks 384.750 39.00
Three-jaw chuck Ø 125 384.751 340.00
Four-jaw chuck Ø 125 384.752 450.00
Protective cap, left 084.547 12.00
Safety cover with suction connections (detachable), can be
rotated up to max. tool diameter 300 mm R384.844 186.00
Safety cover with suction connections (detachable), can be
rotated up to max. tool diameter 300 mm L384.851 186.00
Schleifarm 75x1000 mm kompl. 384.100 398.00
Adapters
Cone adapter »1« M33, B16
required for parts 3,4,5 und 6 R384.713 70.00
Cylinder adapter »2« M33 Ø 20 x 20 mm
R
384.730 70.00
Cylinder adapter »3« B16 Ø 12 x 70 mm R 384.757 42.00
Cylinder adapter »8« 20/17 Ø 12 x 70 mm L 384.875 42.00
Thread adapter »5« for holder part 6 B16 ½“ x 20 R 384.745 41.00
Scroll chuck »6« 13 mm ½“ x 20 part 5 required R 384.741 43.00
Flexible shaft »11« light version Ø 6 x 1000 R 384.742 85.00
Tapered thread mandrel »4« B16 Ø 12 x Ø 20 mm R 384.746 41.00
Adapter set, parts 1,4 and 5 R 384.729 160.00
Special adapter »7« right as per customer requirement R 384.890 115.00
Special adapter »10« left as per customer requirement L 384.891 115.00
Special adapter »12« right for rubber spindles R 384.892 115.00
Tools
Rubber spindles and abrasive sleeves see page 15
(TWS/TOS)
Grinding star, grain 80 384.175 38.00
Grinding star, grain 100 384.176 34.00
Adhesive coating Ø 300 mm 372.234 31.00
Grinding disc coating Ø 300 mm, grain 60, 5 pcs. 372.236 31.00
Grinding disc coating Ø 300 mm, grain 100, 5 pcs. 372.238 31.00
Grinding disc coating Ø 300 mm, grain 120, 5 pcs. 372.238 31.00
Grinding disc coating Ø 300 mm, grain 150, 5 pcs. 372.238 31.00
Abrasive belt for metal, 75x1000 mm, grain 40, 5 pcs. 371.410 22.00
Abrasive belt for metal, 75x1000 mm, grain 60, 5 pcs. 371.411 22.00
Abrasive belt for metal, 75x1000 mm, grain 80, 5 pcs. 371.412 22.00
Abrasive belt for metal, 75x1000 mm, grain 100, 5 pcs. 371.413 22.00
Abrasive belt for metal, 75x1000 mm, grain 120, 5 pcs. 371.414 22.00
Photo:
DA 5000 with machine bed 700 mm
384.705, special adapter 384.891
and 384.713(Extra charge, see accessories)
- 39 -
Flottstr. 25 • 56472 Großseifen • Tel. +49 (0)2661/40484 • Fax. +49 (0)2661/40573 • Email: info@kraeku.de • Website: www.kraeku.de
DS 150 / 200 / 300S / 300P / TOP300
Double grinder
Maschinenbau- und Dienstleistungs GmbH
Grinding
The versatile double grinders
For wood, plastics, steel and
non/ferrous metals
Stable, adjustable
workpiece support.
Quiet running dueto high
quality machine spindle
bearing.
Stable machine body
Motor protection using
thermal sensor
Closed, stable safety cover
Suction connections as
standard
�
�
�
�
�
�
Machine type
Double grinder
Order No.:
Price €:
DS 150
385.260
190.00
DS 200 W
385.261
240.00
DS 200 D
385.266
295.00
DS 300 S
385.262
896.00
DS 300 P
385.263
1,036.00
TOP 300
385.264
1,540.00
Technical data
Grinding disc dimensionsØ 150 x 25
mm
Ø 200 x 25
mm
Ø 200 x 25
mm
Ø 300 x 40 x 51
mm
Ø 300 x 40 x 76
mm
Ø 300 x 40 x 76
mm
Holder flange Ø 32 mm Ø 76 mm
Speed 3000 rpm 1500 rpm
Cutting speed 22 m/sec. 30 m/sec. 30 m/sec. 23 m/sec.
Suction connections Ø 40 mm Ø 50 mm
Motor power 230 V / 50 Hz 0.37 kW 0.55 kW - - - -
Three-phase 400 V / 50 Hz - - 0.55 kW 1.8 kW 2.2 kW
Weight 15 kg 18 kg 70 kg 90 kg
Standard equipment
Spark guard on both sides, steel support plate, power cable with plug, one coarse and one fine grinding disc.
Photo: DS 150
Photo: DS 200, with suction hood 384.270, and
tapered thread mandrel 384.746 and polishing
disc.
Photo: DS 300 S/PPhoto: DS 300S/P with grinding disc
attachment TSE 300 372.153
Photo: TOP 300 with grinding cup wheel
- 40 -
Flottstr. 25 • 56472 Großseifen • Tel. +49 (0)2661/40484 • Fax. +49 (0)2661/40573 • Email: info@kraeku.de • Website: www.kraeku.de
DS 150 / 200 / 300S / 300P / TOP300
Double grinder
Maschinenbau- und Dienstleistungs GmbH
Grinding
Accessories DS 150 / 200 / 300S / 300P Order No. Price €
Machine stand for DS 150 / 200, 21 kg 350.435 168.00
Machine stand for DS 300 D/S/P, TOP , 70 kg 350.410 275.00
Dust extractor SAS 900 483.200 1,020.00
Wall bracket for DS 150 / 200 315.035 99.00
Disc grinder attachment TSE 300 for DS 300 S/P 330.003 360.00
Safety cover with extraction (detachable), right /
left384.270 135.00
NK60 = Normal corundum grey-blue, grain 60, fine – medium, for construction steels and
low-alloy steels and cast iron, with fine grinding pattern.
Replacement grinding disc, NK60, Ø150x20x32,(incl. reducing ring Ø 16; 20; 25 mm)
350.245 28.00
Replacement grinding disc, NK60, Ø175x25x32,(incl. reducing ring Ø 16; 20; 25 mm)
350.246 39.00
Replacement grinding disc, NK60, Ø200x32x51,(incl. reducing ring Ø 32 mm)
350.247 48.00
Replacement grinding disc, NK60, Ø300x40x76,(incl. reducing ring Ø 40; 51 mm)
350.249 145.00
EK80 = High grade corundum white, grain 80, fine, very easy cutting, for hardened steels
with small dimensions
Replacement grinding disc, EK80, Ø150x20x32,(incl. reducing ring Ø 16; 20; 25 mm)
350.251 31.00
Replacement grinding disc, EK80, Ø175x25x32,(incl. reducing ring Ø 16; 20; 25 mm)
350.252 41.00
Replacement grinding disc, EK80, Ø200x32x51,(incl. reducing ring Ø 32 mm)
350.253 51.00
SC80 = Silicon carbide green, grain 80, fine, very hard, for carbide and ceramic coated
tools. Also well suited for glass, non-ferrous metals, cast iron and plastics.
Replacement grinding disc, SC80, Ø250 x 32 x 51,(incl. reducing ring Ø 32 mm)
350.254 74.00
Replacement grinding disc, SC80, Ø300 x 40 x 76,(incl. reducing ring Ø 40; 51 mm)
350.255 156.00
Wire brush, 250 x 60 x 0,35 mm 373.004 152.00
Wire brush, 250 x 95 x 0,35 mm 373.005 199.00
Wire brush, 300 x 60 x 0,35 mm 373.006 158.00
Wire brush, 250 x 60 x 0,45 mm 373.007 205.00
Wire brush, 250 x 45 x 0,35 mm 373.025 102.00
Wire brush, 250 x 45 x 0,50 mm 373.026 102.00
Dressing stone 350.101 35.00
Tapered thread mandrel, B16, Ø8 x Ø25 x 173 mm
long385.277 41.00
Accessories and prices
Photo: Wall bracket 315.035
Photo:
Dust extractor SAS
900, 483.200
(Extra charge, see
accessories)
Photo:TOP 300 on machine stand
with water immersion tank 350.410
(Extra charge, see accessories)
Photo: tapered thread mandrel
385.277, B16, Ø8 x 25x173 mm long
(Extra charge, see accessories)
Usage of various wire
brushes on request
Photo:DS 200 with suction hood 384.270
on machine stand with water immersion
tank 350.435
(Extra charge, see accessories)
Photo:.
DS 300 with wet separator
(Extra charge, see
accessories)
- 41 -
Flottstr. 25 • 56472 Großseifen • Tel. +49 (0)2661/40484 • Fax. +49 (0)2661/40573 • Email: info@kraeku.de • Website: www.kraeku.de
AE 10000/15000/15000D
Drive units
Maschinenbau- und Dienstleistungs GmbH
Grinding
Work in every corner,
without making a lot
of noise.
!
Flexible! Universal!
Grinding
Polishing
Deburring
Drilling
Cutting
Cleaning
Rust removal
Stirring
Controlling ...
Mobile drive units for
everything that turns, with
electronic infinitely variable
speed control.
» »
»Fast
�
�
�
�
�
�
�
�
�
Machine type
Drive units
Order No.
Price €:
AE 10000
powertronic
384.710
685.00
AE 15000
powertronic
384.900
625.00
AE 15000 D
powertronic
384.960
1,690.00
Technical data
Motor powerAlternating current
0.5 kW/230 V
Alternating current
0.45 kW/230 V
Three-phase*
1.5 kW/230 V
Spindle speeds
800-10000
infinitely variable
rpm.
2500-15000
infinitely variable
rpm.
1200 – 15000
Infinitely variable
rpm.
Centre height 115 mm 115 mm XXX mm
Spindle holder, right
Drill chuck(0,5 -10) mm 3/8“ or
M 10 DIN 30M 10 DIN 30
M 10 DIN 30
M 14 DIN 40
Weight 10.5 kg 10.5 kg 28 kg
Standard equipment
Power cable with Schuko plug, scroll chuck
and flexible shaft.
Without flexible shaft for DIN 10 connection
Power cable with
Schuko plug
Without grinding
tools
Power cable with
Schuko plug
Without grinding
tools
* Connection 230 Volts AC
Alternating current with electronic conversion to three-phase current
Photo:AE 15.000
with flexible shaft
(accessories)
Photo:AE 10.000
Photo:
AE 15.000 D with flexible shaft 384.906,
machine trolley 384.980 and shaft holder
384.985.
(Extra charge, see accessories)
New
- 42 -
Flottstr. 25 • 56472 Großseifen • Tel. +49 (0)2661/40484 • Fax. +49 (0)2661/40573 • Email: info@kraeku.de • Website: www.kraeku.de
Maschinenbau- und Dienstleistungs GmbH
Grinding
AE 10000/15000/15000D
Drive units
Accessories AE 10.000 AE 15.000 AE 15.000D AE 3000 D
Order No. Price € Order No. Price € Order No. Price € Order No. Price €
Flexible shaft,
Length: 1200 mm
Connection: M 10 DIN 30,
Tool holder using clamp
without collet
384.742
Only for replacement
or for DIN 10
connection 384.908
384.906 220.00 384.906 220.00 384.906 220.00
Collet
for flexible shaft Ø 3.0384.908 35.00 384.908 35.00 384.908 35.00 384.908 35.00
Collet
for flexible shaft Ø 6.0384.909 35.00 384.909 35.00 384.909 35.00 384.909 35.00
Collet
for flexible shaft Ø 8.0384.910 35.00 384.910 35.00 384.910 35.00 384.910 35.00
Rotatable machine stand 384.905 105.00 384.905 105.00 384.905 105.00 384.905 105.00
Machine trolley 384.980 195.00 384.980 195.00 384.980 195.00 384.980 195.00
Shaft holder 384.985 65.00 384.985 65.00 384.985 65.00 384.985 65.00
Shaft 1500 mm long
DIN 10
DIN 12
DIN 15
DIN10 / G 28
DIN 12 / G 28
DIN 15 / G 35
Photo:
Angle grinder FSM 2:1
On request
Photo:
Angled tool holder WI 7
(6 mm)
On request
Photo:.
Belt sander BSG 10/50
On request
Photo:
Tool holder FH 7 (6 mm)
On request
Photo:.
Tool holder FH 4 (6 mm)
On request
Photo:
Flap brush BSK
On request
Photo:
Rotable machine stand 384.905
Only for AE 10 / 15 000
(Extra charge, see accessories)
- 43 -
Flottstr. 25 • 56472 Großseifen • Tel. +49 (0)2661/40484 • Fax. +49 (0)2661/40573 • Email: info@kraeku.de • Website: www.kraeku.de
POM 300 / POM 400
Polishing machine
Maschinenbau- und Dienstleistungs GmbH
Polishing
For fast and economic machining of wood, plastic and metal
Fast and easy changing of the abrasive and polishing discs
Integrated extractor as standard
Infinitely variable speed on request
�
�
�
Machine type
Polishing machine
Order No.Price €:
POM 300
373.800
2,459.00
POM 300
electronic
373.801
3,500.00
POM 400
373.2002,710.00
POM 400
electronic
373.201
3,745.00
POM 400
373.203
2,950.00
Technical data
Idle speed 700 / 1500 rpm700 – 1500 rpm
infinitely variable700 / 1500 rpm
700 – 1500 rpm
infinitely variable700 / 1500 rpm
Motor output 400V / 50 Hz 2.2 / 3.0 kW 3.0 kW 2.4 / 4.0 kW 4.0 kW 3.0 / 5.0 kW
Centre height 1000 mm
Spindle holder Ø 35 mm
Tool diameter, max. Ø 300 mm Ø 400 mm
Tool length, max. 200 mm 300 mm
Suction connections 1 x Ø 100 mm 4 x Ø 100 mm
- Extraction -
Motor output 400V / 50 Hz 1.1 kW
Air flow 450 m³ / h
Suction connections 2 x Ø 100 mm
Weight 200 kg 225 kg 240 kg 265 kg 240 kg
Standard equipment
Connection cable with CEE connectors, undervoltage release with emergency stop function and thermal protection,
spacing sleeves, operating tool.
Photo: POM 400 with polishing
discs.
Extra charge, see accessories
Photo:
POM 300 with polishing discs
and extractor SAS 900 483.200
- 44 -
Flottstr. 25 • 56472 Großseifen • Tel. +49 (0)2661/40484 • Fax. +49 (0)2661/40573 • Email: info@kraeku.de • Website: www.kraeku.de
POM 300 / POM 400
Polishing machine
Maschinenbau- und Dienstleistungs GmbH
Polishing
Photo: Diverse sisal rings, sisal/coarse cotton cloth rings, sisal/coarse cotton cloth shaft ringsPhoto: Abrasive cloth, fleece discs and nylon
Abrasive and polishing material on request
Accessories Order No. Price €
U-tube without slider 483.527 190.00
U-tube with slider 483.528 250.00
Suction hose Ø 100 mm (1m length) 483.526 35.00
Clamp washers (2pcs./set) Ø 150 x 25 mm 373.254 42.00
Clamp washers (2pcs./set) Ø 230 x 25 mm 373.255 48.00
Polishing and abrasive material not in the product range
Photo:.
POM 400 electronic with
polishing discs and extractor
SAS 900
extra charge, see accessoriesEasy changing of the abrasive disc
Photo: 2 suction connections per safety
- 45 -
Flottstr. 25 • 56472 Großseifen • Tel. +49 (0)2661/40484 • Fax. +49 (0)2661/40573 • Email: info@kraeku.de • Website: www.kraeku.de
A 275 / A 1145
Headstock
Polishing
Maschinenbau- und Dienstleistungs GmbH
KRÄKU is working for
practical industry.
“Made in Germany”
� universally usable for the fast
and uncomplicated machining of
small and large series using:
filing, polishing, sanding,
deburring, rasping, facing, ....
� clamping the workpieces using
three-jaw and quick-action
chucks
� low space requirement due to
compact design
� robust and resistant to
interference, extremely long
service life
� extensive accessories and
safety equipment available
� easily and flexibly adaptable for
special applications
� infinitely variable speed control
between 700 and 1500 rpm on
� motor protection using thermal
� mechanical brake block
Machine type
Headstock
Order No.:
Price €:
A 275
385.200
980.00
A 1145
385.280On request
Technical data
Motor, 400 V / 50 Hz 0.75 / 1.1 / 1.5 kW 1.5 – 4.0 kW
Speed 700 / 1400 / 2800 rpm 100 – 2500 rpm
Centre height 275 mm 1145 mm
Hollow shaft No On request
Lathe chuck Ø 100 – 200 mm Ø 150 – 300 mm
Dimensions (LxWxH) 600 x 300 x 410 mm 420 x 600 x 1145 mm
Weight 80 kg approx. 120 kg
Standard equipment
Connection cable with CEE connector, lockable undervoltage release with
emergency stop function,
Accessories Order No. Price €
Three-jaw chuck Ø 100 mm 384.754 294.00
Three-jaw chuck Ø 125 mm 384.751 324.00
Three-jaw chuck Ø 160 mm 384.753 355.00
“Other sizes on request”
Three-jaw chuck guard (not illustrated) 384.756
Machine bed 700 mm 384.700 180.00
“Other sizes on request”
Cabinet with 3 lockable doors 373.011 280.00
Mechanical brake block 385.230 250.00
Accessories and prices
Photo: Headstock A 275 with three-jaw chuck
(Extra charge, see accessories)
275
mm
1145
Photo:
Headstock A 1145 with
three-jaw chuck 384.753
(Technical data and price on
- 46 -
Flottstr. 25 • 56472 Großseifen • Tel. +49 (0)2661/40484 • Fax. +49 (0)2661/40573 • Email: info@kraeku.de • Website: www.kraeku.de
POM 300-2
Polishing machine
Maschinenbau- und Dienstleistungs GmbH
Polishing
The polishing combination for all purposes.
“Made in Germany”
� universally usable for fast and uncomplicated
machining of small and large series using: polishing,
sanding, deburring, ....
� robust and not sensitive to interference, extremely
� easily and flexibly adaptable for special applications
� infinitely variable speed control on request
� every motor with two speeds as standard
� motors can be controlled individually
Machine type
Polishing machine
Order No.:
Price €:
POM 300-2
373.280
2,050.00
Technical data
Motor, 400 V 2.2 / 3.0 kW
Speed 750 / 1500 rpm
Centre height 900 mm
Shaft length 300 mm
Clamping length 220 mm
Shaft Ø 35 mm
Max. disc Ø 300 mm
Dimensions (LxWxH) 1550 x 600 x 1200 mm
Weight 175 kg
Standard equipment
Connection cable with CEE connector, lockable
undervoltage release with emergency stop function,
Accessories Order No. Price €
Extractor (integrated in the cabinet) 385.410 530.00
Dust bag 371.102 65.00
Mechanical brake block
Accessories and prices
- 47 -
Flottstr. 25 • 56472 Großseifen • Tel. +49 (0)2661/40484 • Fax. +49 (0)2661/40573 • Email: info@kraeku.de • Website: www.kraeku.de
Brush deburring machine
BEM 300
Maschinenbau- und Dienstleistungs GmbH
Deburring
Photo: BEM 300
Photo: BEM 300 U, 373.002(Right or left according to customer
achine type
Brush deburring
machine
Order No.
Price €:
BEM 300With cabinet
373.000
2,400.00
BEM 300 T
Table model
373.001
2,250.00
BEM 300 U
Uno
373.002
1,900.00
Technical data
Brush diameter 250/300 mm 250/300 mm 250/300 mm
Max. brush width 100 mm 100 mm 100 mm
Brush holder Ø 50,8 mm with 2 key slots 13 x 7 mm
Speeds 1500/3000 1500/3000 1500/3000
Motor output3-phase 400 V, reversible polarity
2.4 / 3.0kW 2.4 / 3.0kW 2.4 / 3.0kW
Suction connections 2 x 100 mm 2 x 100 mm 1 x 100 mm
Height 1250 mm 460 460
Width 700 mm 700 mm 520
Depth 440 mm 440 mm 440 mm
Weight 180 kg 120 kg 95 Kg
Standard equipment
Connection cable with CEE connector, workpiece supports, 2 brushes
Ø 250 x 55 mm, eye protection, operating tool, motor protection using
thermal sensor
Photo: BEM 300 with standard
cabinet
(Cabinet cannot be evacuated)
For fast and economical deburring of
tubes, hollow profiles, profiles made of
solid material and sheet metal made of
steel, stainless steel or non-ferrous
metals.
Very fast, simple and safe deburring,
especially for complicated profiles or shapes
right into the smallest corners.
Using the infinitely adjustable brush spacing
from the workpiece, uniform deburring of the
workpieces with simultaneous compensation of
the brush wear is possible.
The infinitely ajustable height of the workpiece
supports makes possible an as required
deburring of only the outside or inside edge or
the simultaneous deburring of both the outside
and inside edges.
A very large selection of wire brushes available
as standard guarantees use for the most diverse
materials and the achievement of the desired
surface quality.
There is a long service life and brush changes
are rarely needed due to the use of wire
brushes up to a diameter of 300 mm.
The workpiece supports with prismatic guide
are made of plastic and provide secure support
for round profiles with simultaneous protection
of sensitive surfaces against scratches.
The fast and simple installation of attachments
such as a sheet metal deburring attachment or
the short tube deburring attachment round off
the use of the machine with regard to fast and
safe deburring.
�
�
�
�
�
�
�
- 48 -
Flottstr. 25 • 56472 Großseifen • Tel. +49 (0)2661/40484 • Fax. +49 (0)2661/40573 • Email: info@kraeku.de • Website: www.kraeku.de
Brush deburring machine
BEM 300
Maschinenbau- und Dienstleistungs GmbH
Deburring
Accessories Order No. Price €
Short tube deburring attachment 373.110 48.00
Tube adapter
(Diameter according to customer desire)373.112
At cost
Sheet metal deburring attachment with
roller table373.100
282.00
Plastic supports 373.003 43.00
Wire brush Ø 250 x 60 x 0.35 mm 373.004 152.00
Wire brush Ø 250 x 95 x 0.35 mm 373.005 199.00
Wire brush Ø 300 x 60 x 0.35 mm 373.006 158.00
Other brushes on request
Extraction
Extractor SAS 900 400V/ 50Hz/ 1.1kW 483.200 1,020.00
Replacement filter mat 330.182 41.00
Deburring schema for outside
deburring
Deburring schema for outside
and inside deburring
Deburring schema for inside
deburring
Photo:BEM 300 T with
evacuatable machine stand
SAS 900
Extra charge, see
accessories
With suction connections Ø 100
mm as standard for extraction
with extractor 0SAS 900 or a
mobile suction system.
Safety guard for holding wire
brushes up to Ø 300 mm and
infinitely adjustable spacing
from the workpiece.
Technical data
Extractor SAS 900
Suction connections _________Ø 2 x 100 mm
Air flow ___________________2 x 900 m³ / h
Motor output 400 V / 50 Hz _________1.1 kW
Total weight ______________________50 kg
Short tube deburring attachment
for safe deburring of short workpieces.
Sheet metal deburring attachment with roller
table, for the safe deburring of sheet metal.
- 49 -
Flottstr. 25 • 56472 Großseifen • Tel. +49 (0)2661/40484 • Fax. +49 (0)2661/40573 • Email: info@kraeku.de • Website: www.kraeku.de
Bench drill
TB K 16
Maschinenbau- und Dienstleistungs GmbH
Drilling
Our K-series bench drill for the
professional.
“ Made in Germany ”
� The giant of the small models with a throat
depth of 240 mm.
� Infinitely variable speed.
� Drill head height adjustment with gas spring
support for easy adjustment of the drill head height.
� Smooth running and powerful electric motor with
high torque in all speed ranges.
� Extra long precise, also for max drilling depth,
sleeve guide.
� Spindle with precision ball bearings.
� Quickly adjustable stop ring for setting the drilling
depth.
� Thick-walled steel column prevents the machine
recoiling.
� Solid, large dimensioned base plate with T-slot,
surface milled and polished.
� Heavy duty design of the complete machine.
� Ideally suitable for industry, schools, workshops
and home workers.
Machine Type
Bench drill
Order No.:
Price €:
TB K 16 STW
380.000
890,00
TB K 16 LS
380.001
1.025,00
TB K 16 HS
380.002
1.140,00
TB K 23 WD
380.003
1.260,00
Technical data
Drilling performance (max.)
Steel 15 mm 8 mm 23 mm
Aluminium 25 mm 12 mm 25 mm
Softwoods 40 mm 15 mm 50 mm
Motor output AC 230 V, 1,1 kW 1,1 kW*
Infinitely variable spindle
speeds400 – 4500 min
-1 St.I =200 – 420 min-1
St.II = 420 –4500 min-1 500 – 7000 min
-1270 – 2200 min
-1
Spindle B 16 DIN 238 B 16 / MK II
Drilling depth 65 mm
Throat depth 240 mm
Column diameter 60 mm
Usable table area 250 x 330 mm
Speed indicator graduation
Drilling depth indicator graduation
Drilling depth stop Bague butée réglable rapidement
Feed manuel
Drill head height
adjustmentmanuel
Weight 54 kg 65 kg
Standard equipment
Keyless chuck B 16, 1–13 mm , and scroll chuck B12, 0,5-8 or scroll chuck B16, 1,5-13
Photo: TB K 16 STW with
height adöjustment via
threaded spindle 290.337(Extra charge, see
accessories)
Photo: TB K 23 WD with gas
lift supported drill head
height adjustment
- 50 -
Flottstr. 25 • 56472 Großseifen • Tel. +49 (0)2661/40484 • Fax. +49 (0)2661/40573 • Email: info@kraeku.de • Website: www.kraeku.de
TB K 16
Bench drill
Maschinenbau- und Dienstleistungs GmbH
Drilling
Accessories Order No. Price €
Height adjustment via threaded spindle 290.337 152.00
MK I drill spindle 290.308 110.00
Emergency stop pushbutton, lockable 290.325 65.00
Drill guard without electric locking 290.825 30.00
Drill guard with electric locking 290.835 165.00
Machine cabinet without door 290 x 420 x 800 mm 213.163 195.00
Machine cabinet with door, lockable 290 x 420 x 800 mm 213.160 295.00
Stop system, 665 mm long with 2 adjustable fold stops 227.000 210.00
Stop system, 2010 mm long with 4 adjustable fold stops 227.020 265.00
Metering unit
Connection hose with metering nozzle and magnetic base On request
Metering nozzle with magnetic base
Metering nozzle with tube holder
Tools
Keyless chuck, B16, 0.5 - 10 mm 285.101 60.00
Keyless chuck, B16, 1 - 13 mm 285.131 69.00
Keyless chuck, B16, 1 - 16 mm 285.161 77.00
Scroll chuck, B16, 1 - 13 mm 285.130 54.00
Scroll chuck, B16, 2.5 - 16 mm 285.132 65.00
Scroll chuck, B12, 1 - 8 mm 285.072 15.00
Tapered mandrel MK 1 / B 12 285.308 15.00
Tapered mandrel MK 1 / B 16 285.310 20.00
Twist drill set in metal case,
19 pcs. Ø 1 – 10 mm, 0.5 mm increments285.125 36.00
Sheet metal cone bit set, 7 pcs.,
Size1 (Ø 3.0 – 14.0), Size2 (Ø 6.0 – 20.0), Size3 (Ø 16.0 – 30.0),285.127 83.00
Countersink and deburring countersink set,
6 pcs., 90° with 3 cutters, DIN 335 Form C285.128 79.00
Machine vice No.0, with 80 mm jaw width 281.501 60.00
Machine vice No.1, with 100 mm jaw width 281.119 75.00
Lighting with magnetic base, 12 V 250.220 140.00
Accessories and prices
Keyless chuck B16(Extra charge, see accessories)
Scroll chuck B16(Extra charge, see accessories)
Drill chuck holder with Morse taperl
MK I and tang(Extra charge, see accessories)
Machine vice extra
charge, see
(
Photo: Stop system with 2 or
with 4 stops(Extra charge, see accessories)
Machine cabinet with
lockable door(Extra charge, see accessories)
Scroll chuck B12(Extra charge, see accessories)
Photo: Metering unit with
various nozzles(Extra charge, see accessories)
- 51 -
Flottstr. 25 • 56472 Großseifen • Tel. +49 (0)2661/40484 • Fax. +49 (0)2661/40573 • Email: info@kraeku.de • Website: www.kraeku.de
Pillar drill
SB K 23
Maschinenbau- und Dienstleistungs GmbH
Drilling
Our K-series pillar drill for the
professional.
“ Made in Germany ”
Infinitely variable speed.
Emergency stop pushbutton
Undervoltage release
Table height adjustment via gear rack.
Smooth running and powerful electric motor with
high torque in all speed ranges.
Extra long, precise, also at max. drilling depth,
sleeve guide.
Spindle with precision ball bearings.
Quickly adjustable stop ring for setting the drilling
depth.
Thick-walled steel column prevents the machine
recoiling.
Solid, large rotable drill table with T-slot, surface
milled and polished.
Solid, large dimensioned base plate, surface milled
and polished.
Heavy duty design of the complete machine.
Ideally suited for industry, schools, workshops and
home workers.
�
�
�
�
�
�
�
�
�
�
�
�
�
�
Throat depth of 240 mm.
Machine type
Pillar drill
Order No.:
Price €:
SB K 23STD
380.004
3.120,00
Technical data
Deilling performance (max.)
Steel 23 mm
Aluminium 25 mm
Softwoods 50 mm
Motor output 3-phase 400 V,á P1 = 0,55 kW, P 2 = 1,1 kW
Infinitely variable spindle speeds 270 - 2200 min-1
Spindle MK II
Drilling depth 65 mm
Throat depth 240 mm
Column diameter 110 mm
Usable table area 830 x 280 mm
Speed indicator Scale
Drilling depth indicator Scale
Drilling depth stop Quickly adjustable stop ring
Feed By hand
Table height adjustment By hand (with motor on request)
Weight 195 kg
Stabdard equipment
Keyless chuck, MK II
áConnection 230 Volt AC with electronic conversion to three-phase
current.
Photo: SB K 16 STD with
support table made of
steel. (Extra charge, see
accessories)
- 52 -
Flottstr. 25 • 56472 Großseifen • Tel. +49 (0)2661/40484 • Fax. +49 (0)2661/40573 • Email: info@kraeku.de • Website: www.kraeku.de
SB K 23
Pillar drill
Maschinenbau- und Dienstleistungs GmbH
Drilling
Twist drill set in metal case
(Extra charge, see accessories)
Keyless chuck B16(Extra charge, see accessories)
Accessories Order No. Price €
Height adjustment via threaded spindle 290.337 152.00
MK I drill spindle 290.308 110.00
Emergency stop pushbutton, lockable 290.325 65.00
Drill guard without electric locking 290.825 30.00
Drill guard with electric locking 290.835 165.00
Machine cabinet without door 290 x 420 x 800 mm 213.163 195.00
Machine cabinet with door, lockable 290 x 420 x 800 mm 213.160 295.00
Stop system, 665 mm long with 2 adjustable fold stops 227.000 210.00
Stop system, 2010 mm long with 4 adjustable fold stops 227.020 265.00
Metering unit
Connection hose with metering nozzle and magnetic base On request
Metering nozzle with magnetic base
Metering nozzle with tube holder
Tools
Keyless chuck, B16, 0.5 - 10 mm 285.101 60.00
Keyless chuck, B16, 1 - 13 mm 285.131 69.00
Keyless chuck, B16, 1 - 16 mm 285.161 77.00
Scroll chuck, B16, 1 - 13 mm 285.130 54.00
Scroll chuck, B16, 2.5 - 16 mm 285.132 65.00
Scroll chuck, B12, 1 - 8 mm 285.072 15.00
Tapered mandrel MK 1 / B 12 285.308 15.00
Tapered mandrel MK 1 / B 16 285.310 20.00
Twist drill set in metal case,
19 pcs., Ø 1 – 10 mm, 0.5 mm increments285.125 36.00
Sheet metal cone bit set, 7 pcs.,
Size 1 (Ø 3.0 – 14.0), Size 2 (Ø 6.0 – 20.0), Size 3 (Ø 16.0 –
30.0),
285.127 83.00
Countersink and deburring countersink set,
6 pcs.90° with 3 cutters, DIN 335 Form C285.128 79.00
Machine vice No.0, with 80 mm jaw width 281.501 60.00
Machine vice No.1, with 100 mm jaw width 281.119 75.00
Lighting with magnetic base, 12 V 250.220 140.00
Accessories and prices
Chuck holder with morse taper
MK I and tang(Extra charge, see accessories)
Machine vice Extra
charge, see
accessories
(
)
Photo: Metering unit with
various nozzles(Extra charge, see accessories)
Photo: Stop system with 2 or 4 stops(Extra charge, see accessories)
- 53 -
Flottstr. 25 • 56472 Großseifen • Tel. +49 (0)2661/40484 • Fax. +49 (0)2661/40573 • Email: info@kraeku.de • Website: www.kraeku.de
Metal circular saw
Maschinenbau- und Dienstleistungs GmbH
Saws
Accessories Order No. Price €
Machine stand for MK 250 510.010 300.00
Machine stand for MK 315 / 350 510.110 360.00
Pneumatic vice for MK 315 and MK 350, (extra charge) 510.120 884.00
Tools
Circular saw blade made of HSS-OM 05, Ø 250 x 2.0 x 32, 130 Z 510.052
Circular saw blade made of HSS-OM 05, Ø 250 x 2.0 x 32, 200 Z 510.054
Circular saw blade made of HSS-OM 05, Ø 315 x 2.5 x 32, 160 Z 510.152
Circular saw blade made of HSS-OM 05, Ø 315 x 2.5 x 32, 220 Z 510.154
Circular saw blade made of HSS-OM 05, Ø 350 x 3.0 x 32, 130 Z 510.252
Circular saw blade made of HSS-OM 05, Ø 350 x 3,0 x 32, 180 Z 510.254
Accessories
Machine type
Metal circular saw
Order No.
Price €:
MK 350 D
510.201
3,720.00
Technical data
Motor output 1.35 / 1.75 / 2.4 kW
Saw blade speed 22 / 44 / 88 rpm
Gear reduction 32/1
Saw blade diameter Ø 350 mm
Saw blade drilled hole Ø 32 mm
Vice clamping width 170 mm
Weight, without stand 186 kg
Dimensions (LxWxH),without stand
700 x 1250 x 1000 mm
90° 120 mm 105 x 105 mm 160 x 90 mm
45° R 100 mm 85 x 85 mm 85 x 70 mm
45° R 100 mm 85 x 85 mm 85 x 70 mm
�
�
�
�
�
�
�
Head rotation from 0° to 90° clockwise and from 0° to
45° anticlockwise.
Gear reduction in the oil bath with nickelbronze wheel
and hardened, polished worm gear.
Quick-action vice with counter clamping mechanism.
Adjustable blade guard coupling.
Sliding countervice for longitudinal cutting.
Adjustable double hinge pin.
Coolant pump.
Photo: MK 350 D with
machine stand
(Extra charge, see
MK 350
Other sizes and types of construction on request
- 54 -
Flottstr. 25 • 56472 Großseifen • Tel. +49 (0)2661/40484 • Fax. +49 (0)2661/40573 • Email: info@kraeku.de • Website: www.kraeku.de
Metal circular saws
Maschinenbau- und Dienstleistungs GmbH
Saws
Accessories Order No. Price €
Infeed roller conveyor
for models MB 200/270L and MB 270P/PH511.330 830.00
Infeed roller conveyor
for models MB 270S and MB 305P511.332 1,607.00
Longitudinal stop
for models MB 200/270L and MB 270P/PH511.430 1,474.00
Longitudinal stop
for models MB 270S and MB 305P511.432 2,140.00
Tools
Bandsaw blade bimetal, 2080 x 20 x 0.9 mm, 3/4 Z“, VPE 2 pcs./pair 511.052
Bandsaw blade bimetal, 2080 x 20 x 0.9 mm, 4/6 Z“, VPE 2 pcs./pair 511.054
Bandsaw blade bimetal, 2080 x 20 x 0.9 mm, 5/8 Z“, VPE 2 pcs./pair 511.056
Bandsaw blade bimetal, 2450 x 27 x 0.9 mm, 3/4 Z“, VPE 2 pcs./pair 511.152
Bandsaw blade bimetal, 2450 x 27 x 0.9 mm, 4/6 Z“, VPE 2 pcs./pair 511.154
Bandsaw blade bimetal, 2450 x 27 x 0.9 mm, 5/8 Z“, VPE 2 pcs./pair 511.156
Bandsaw blade bimetal, 2750 x 27 x 0.9 mm, 3/4 Z“, VPE 2 pcs./pair 511.452 58.00
Bandsaw blade bimetal, 2750 x 27 x 0.9 mm, 4/6 Z“, VPE 2 pcs./pair 511.454 58.00
Bandsaw blade bimetal, 2750 x 27 x 0.9 mm, 5/8 Z“, VPE 2 pcs./pair 511.456 58.00
Accessories
Machine type
Metal band saw
Order No.
Price €:
MB 305 P
511.401
6,830.00
Technical data
Motor power 400V/50Hz 1.0 / 1.4 kW
Band speed 33 / 66 m/min
Band dimensions 2750 x 27 x 0.9 mm
Vice clamping width 305 mm
Weight 470 kg
Dimensions (LxWxH), 2000 x 1330 x 1850 mm
Accessories Order No. Price €
Pneumatic vice 511.440 884.00
�
�
�
�
�
�
�
�
�
�
With hydraulic saw frame lowering (infinitely
adjustable)
Saw frame made of cast iron.
Two cutting speeds 33/66 m/min.
Manual quick-action vice.
Manual band tensioning with electronic band monitoring.
Steel subframe.
Vice clamping width 305 mm.
Mitre cuts 0°-60° R and 0°-45° L.
Working height 740 mm.
Saw band guide with carbide plates.
90° 255 mm 250 mm 300 x 200 mm
45° R 190 mm 180 mm 190 x 170 mm
45° L 160 mm 140 mm 170 x 120 mm
60° R 110 mm 110 mm 110 x 150 mm
MB 305 P
Other sizes and type of construction on request
- 55 -
Flottstr. 25 • 56472 Großseifen • Tel. +49 (0)2661/40484 • Fax. +49 (0)2661/40573 • Email: info@kraeku.de • Website: www.kraeku.de
Metal bandsaw
Maschinenbau- und Dienstleistungs GmbH
Saws
The electronic, precision bandsaw with
the large throat depth
for aluminium, steel plate or other metals. The
ideal machine for craftsmen, schools and
home workers.
With electronically controlled infinitely
variable motor speeds for setting the
cutting speed
With 3-phase current from the AC socket
and exemplary operating comfort
Three-roller, precision bandsaw guidance
Stable case made of die-cast aluminium
Simple, consistent sawblade tensioning
Dynamicaly balanced roller with special
coating, quiet operation
Sawblades and band cutters for many
applications
Tiltable table 0 - 45°
�
�
�
�
�
�
�
�
Machine type
Metal bandsaw
Order No.:
Price €:
MBS 400
electronic
511.501
2,486.00
MBS 400 D
511.502
2,278.00
Technical data
Motor three-phase 0.55 kW *,400 V 0.55 kW, 400 V
Speed ranges 40 - 145 rpm 47 / 94 rpm
Band speed 23 – 86 m/min 28 / 56 m/min
Table size 400 x 400 mm 400 x 400 mm
Clearance height 160 mm 160 mm
Throat depth 400 mm 400 mm
Tiltable table 0 - 45° 0 - 45°
Weight 50 kg 50 kg
Protection class IP 54 IP 54
* Connection 230 Volt AC with electronic conversion to three-phase.
Standard equipment
1 bandsaw blade for metal, with connection cable 488.762,
padlockable motor protection switch with undervoltage release and
emergency stop function, operating tool.
Bei MBS 400 electronic
Stufenlose Drehzahlregelung
Gehrungen sägen
Photo:
Metal bandsaw 511.501 with
cabinet 373.011.
(Extra charge, see accessories)
MBS 400
- 56 -
Flottstr. 25 • 56472 Großseifen • Tel. +49 (0)2661/40484 • Fax. +49 (0)2661/40573 • Email: info@kraeku.de • Website: www.kraeku.de
Metal bandsaw
Maschinenbau- und Dienstleistungs GmbH
Saws
Accessories and pricesMachine type Order No. Price €
Metal bandsaw MBS 400 electronic 511.501 2,486.00
Metal bandsaw MBS 400 D 511.502 2,278.00
Accessories
Connection cable, 3 m long, alternating current 488.762 56.00
Machine stand, mobile 491.740 205.00
Cabinet with 3 lockable doors 373.011 295.00
Dolly with galvanised steel roller, roller Ø 50 mm,
width 500 mm, infinitely adjustable height 650-1150
mm
494.410 85.00
Dolly with galvanised bearing strip and 7 bearing
elements, width 500 mm, infinitely adjustable height
650-1150 mm
494.415 99.00
Tools
Bandsaw blade for metal and plastic,
2110 x 6 x 0.4 mm, 12 Z/“,
packaging unit 2 pcs./pair491.720 50.00
Bandsaw blade for metal and plastic,
2110 x 12 x 0.4 mm, 12 Z/“,
packaging unit 2 pcs./pair491.721 50.00
Bandsaw blade for metal and plastic,
2110 x 6 x 0.65 mm, 14 Z/“, special steel
packaging unit 2 pcs./pair440.011 50.00
Bandsaw blade for metal and plastic,
2110 x 6 x 0.65 mm, 24 Z/“, special steel
packaging unit 2 pcs./pair440.012 50.00
Bandsaw blade for metal and plastic,
2110 x 12 x 0.65 mm, 24 Z/“, special steel
packaging unit 2 pcs./pair440.021 50.00
Bandsaw blade for metal and plastic,
2110 x 13 x 0.5 mm, 12 Z/“, Swedish steel
packaging unit 2 pcs./pair440.035 50.00
Photo:
3 part cabinet 373.011
with 3 lockable doors
Machine stand, mobile 491.740
MBS 400
- 57 -
Flottstr. 25 • 56472 Großseifen • Tel. +49 (0)2661/40484 • Fax. +49 (0)2661/40573 • Email: info@kraeku.de • Website: www.kraeku.de
Circular saw KS 1011 Withdust tested
GS qualitymark
Maschinenbau- und Dienstleistungs GmbH
Saws
The “mobile” from KRÄKU
A compact, transportable power package with
a wide range of uses. In use everywhere that
flexibility is required: for old buildings
restoration, interior finishing, in workshops and
for assembly/installation. The infinitely
adjustable from 0-80 mm sawblade and 4300
rpm ensure a precise cut.
The aluminium table, machined on all sides,
with T-slot is the base for a wide range of
sophisticated accessories. For machining
variants which leave hardly anything to be
desired.
Sawblade can be swivelled
Speed 4300 rpm
Infinitely adjustable cutting height from 0-
80 mm
Clearly legible height and angle scale with
inspection window
Easily transportablel
Aluminium table machined on all sides with
two T-slots
GS quality mark
Numerous accessories
�
�
�
�
�
�
�
�
KS 1011 with machine stand 465420,
sliding table 465100 and additional tables
465030 and 465020.
Extra charge, see accessories.
The“M
obile”from
KRÄK
U
Machine type
Circular saw KS 1011 D
Motor 3-phase 400 V
Order No.
Price €:
KS 1011 D
1.6 kW
461.001
1,680.00
KS 1011 D
2.2 kW
461.002
1,860.00
KS 1011 W
1.3 kW/ 230 V
461.003
1,760.00
Technical data
Saw table size 460 x 600 mm
Cutting height 0-80 mm
Cutting height at 45° 45 mm
Swivel range of the saw shaft 0 – 45 °
Saw blade Ø 250 mm
Saw shaft Ø 30 mm
Speed 4300 rpm
Suction connections Ø 100 mm
Weight 43 kg
Motor output
Three-phase 400 V 1.6 kW
Three-phase 400 V 2.2 kW
Alternating current 230 V 1.3 kW
Cutting width
Right 415 mm
Right with additional table 625 mm
Sliding table cutting width 1000 mm
In front of the saw blade 630 mm
Standard equipment
Longitudinal stop with adjustable stop strip, mitre stop, splitting wedge 2 mm and 2.5 mm,
sliding vice, padlockable motor protection switch with undervoltage release and emergency
stop function, operating tool, suction connections, carbide blade Ø 250, 30 teeth, clamp cover
can be vacuumed.
- 58 -
Flottstr. 25 • 56472 Großseifen • Tel. +49 (0)2661/40484 • Fax. +49 (0)2661/40573 • Email: info@kraeku.de • Website: www.kraeku.de
Circular saw KS 1011
Maschinenbau- und Dienstleistungs GmbH
Saws
Accessories and pricesMachine types Order No. Price €
Circular saw KS 1011 D 1.6 kW, 400 V 461.001 1,750.00
Circular saw KS 1011 D 2.2 kW, 400 V 461.002 1,950.00
Circular saw KS 1011 W 1.3 kW, 230 V 461.003 1,850.00
Accessories
Connection cable, alternating current 488.762 56.00
Connection cable, with phase inverter (for 3-phase) CEE connector 488.761 58.00
Sliding table, table size 400 x 250 mm, cutting width in front of saw blade 360
mm
465.100 735.00
Sliding table extension, length 340 mm 465.160 92.00
Large additional table, right 360 x 600 mm, made of sheet metal 465.030 85.00
Large additional table, right 360 x 660 mm, made of die-cast aluminium 467.760 335.00
Long scale strip, required for additional table (870 mm long) 465.370 65.00
Additional table, rear 300x500 mm, aluminium with continuous slots 465.020 165.00
Stop rail, complete 465.170 120.00
Support with parallel guide, only in combination with 467.760 467.380 275.00
Machine stand, mobile 465.420 199.00
Additional safety equipment see category >>Safety<<
Dust extractors see category >>Extraction< <
Tenon cutting attachment, max cutting depth 47 mm 490.550 90.00
Dolly with galvanised steel roller, roller diameter 50 mm, width 500 mm, infinitely
adjustable height 650-1150 mm494.410 85.00
Dolly with galvanised bearing strip and 7 bearing elements, width 500 mm,
infinitely adjustable height 650-1150 mm494.415 99.00
Tools
Carbide blade for hardwoods and softwoods, Ø 250/30 mm, 30 teeth 466.106 75.00
Carbide blade for laminated particle boards, Ø 250/30 mm, teeth 60 466.102 150.00
Carbide blade for aluminium and plastic profiles, Ø 250/30 mm, teeth 80 466.103 220.00
Carbide blade for particle boards laminated on two sides, Ø 250/30, 48 teeth 466.105 200.00
Abrasive paper, Ø 250/30 mm 466.007 45.00
Abrasive coatings for abrasive paper, Ø 250 mm, grain 60, 5 pcs. 466.027 32.00
Abrasive coatings for abrasive paper, Ø 250 mm, grain 100,5 pcs. 466.028 26.00
Adhesive coating 466.026 24.00
Waxilit, wax, can 1 kg 498.305 35.00
Silbergleit, wax, can 250 g 498.300 22.00
Photo: KS 1011
basic model
Additional safety
equipment, see
category >>Safety<<
- 59 -
Flottstr. 25 • 56472 Großseifen • Tel. +49 (0)2661/40484 • Fax. +49 (0)2661/40573 • Email: info@kraeku.de • Website: www.kraeku.de
Circular saw KS 2011
Maschinenbau- und Dienstleistungs GmbH
Saws
Precision circular saw KS 2011
Powerful, precision circular saw designed for
professional and demanding use with
extensive range of accessories.
Universally usable for machining wood,
plastics and non-ferrous metals.
The saw shaft, which can be infitely adjusted
for height from 0-80 mm and can be
swivelled up to 45°, operates at 4300 rpm;
the special configuration also operates at
2150 rpm. Additional equipment can be
installed in just a few steps.
A machine which is distinguished by mature
design. It is ideally suited for workshops,
schools and industry.
Photo: KS 2011 with small sliding table
including stop rail 465100.
Extra charge, see accessories
Technical data
Saw table size, aluminium 560 x 655 mm
Cutting width right with additional table 630 mm
Cutting width right with support 1000 mm
Cutting height 80 mm
Height adjustment of the saw shaft 8 – 80 mm
Swivel range of the saw shaft 0 – 45°
Cutting height at 45° 50 mm
Speed 4300 rpm
Special speeds (at extra charge) 4300 / 2150 rpm
Diameter of the saw blade Ø 250 mm
Diameter of the saw shaft Ø 30 mm
Height to top edge of table 900 mm
Weight 95 kg
Standard equipment
Longitudinal stop with adjustable stop strip 463.600, mitre stop 463.650,
splitting wedge 2.5 mm 463.364, sliding vice, operating tool, suction
connections 100 mm, motor protection switch with emergency stop function,
carbide saw blade 466.106, clamp cover can be vacuumed 461.140.
Connection cable with connector. All machines have motor protection as
standard.
Machine type
Circular saw KS 2011 D
Motor 3-phase 400 V
Order No.
Price €:
KS 2011 D
1.6 kW
462.031
2,300.00
KS 2011 D
2.2 kW
462.035
2,485.00
KS 2011 D
3.0 kW
462.036
2,590.00
Machine type
Circular saw KS 2011 W
Motor AC 230 V
Order No.
Price €:
KS 2011 W
1.3 kW
462.030
2,390.00
KS 2011 W
1.8 kW
462.034
2,570.00
Photo: KS 2011 with saw table
made of grey cast iron
467.980, sliding table 467.100,
heavy duty stop rail 467.220
with extension 467.240, heavy
duty mitre stop 470.270,
additional table 467.760,
trolley 467.770 and SUVA
safety guard.
(Extra charge, see
accessories)
Photo: KS 2011 with sliding table including stop
rail 467100, additional table 467760, support
467380 and trolley 467770.
(Extra charge, see accessories)
Also available as bench circular saw
or with
swivel range up to50°
(e.g. For machining
Plexiglas) t
Prices on requesAlso available as bench circular saw
or with
swivel range up to50°
(e.g. For machining
Plexiglas) t
Prices on reques
Withdust tested
GS qualitymark
- 60 -
Flottstr. 25 • 56472 Großseifen • Tel. +49 (0)2661/40484 • Fax. +49 (0)2661/40573 • Email: info@kraeku.de • Website: www.kraeku.de
Circular saw KS 2011
Maschinenbau- und Dienstleistungs GmbH
Saws
Accessories and pricesAccessories Order No. Price €
Sliding table including stop rail, table size
400 x 250 mm, cutting width in front of saw blade 400 mm465.100 735.00
Sliding table extension, length 340 mm for 465.100 465.160 92.00
Sliding table including stop rail, table size
500 x 300 mm, cutting width in front of saw blade 710 mm467.100 1125.00
Sliding table extension, length 350 mm for 467.100 470.220 165.00
Heavy duty mitre stop for T-slot 470.060 272.00
Heavy duty stop rail with longitudinal stop for sliding table 467.100 467.220 320.00
Extension for heavy duty longitudinal stop 467.240 169.00
Longitudinal stop, complete 463.600 375.00
Heavy duty mitre stop for sliding table 467.100 470.270 285.00
Large additional table, right 360 x 660 mm, die-cast aluminium
with long scale strip467.760 335.00
Additional table, rear 300 x 500 mm, aluminium with continuous slots 465.020 165.00
Support with parallel guide, only in combination with 467760 467.380 275.00
Tenon cutting attachment, max. cutting depth 47 mm 490.550 90.00
Trolley, with 4 lowerable wheels, only for KS 2011 467.770 380.00
Evacuatable clamp cover, retrofit set 461.140 155.00
Safety cover clearance 1000 mm 467.480 499.00
Additional safety equipment see category >Safety<
Dolly with galvanised steel roller, roller diameter 50 mm, width 500 mm,
infinitely variable height adjustment 650-1150 mm494.410 85.00
Dolly with galvanised bearing strip and 7 bearing elements, width 500 mm,
infinitely variable height adjustment 650-1150 mm494.415 99.00
Waxilit, wax, can 1 kg 498.305 35.00
Silbergleit, wax, can 250 g 498.300 22.00
Tools
Carbide blade for hardwoods & softwoods, Ø 250/30, teeth 30 466.106 75.00
Carbide blade for laminated particle boards, Ø 250/30 mm, teeth 60 466.102 150.00
Carbide blade for aluminium & plastic profiles, Ø 250/30 mm, teeth
80466.103 220.00
Carbide blade for double sided particle boards, Ø 250/30 mm, teeth
48466.105 200.00
Abrasive paper, Ø 250/30 mm 466.007 45.00
Abrasive coatings for abrasive paper Ø 250 mm, grain 60
5 pcs (adhesive backing)466.027 32.00
Abrasive coatings for abrasive paper Ø 250 mm, grain100, 5 pcs
(adhesive backing)466.028 26.00
Adhesive coating 466.026 24.00
Available at extra cost (subsequent attachment not possible)
Two speeds 4300/2150 rpm, output 2.5/1.9 kW 400 V 3-
phase467.970 480.00
Saw table made of grey cast iron (550 x 600 mm) 467.980 450.00
Angle adjustment with hand wheel 467.982 350.00
Additional safety
equipment, see
category >Safety<
Rollbock 494410
Rollbock 494415
- 61 -
Flottstr. 25 • 56472 Großseifen • Tel. +49 (0)2661/40484 • Fax. +49 (0)2661/40573 • Email: info@kraeku.de • Website: www.kraeku.de
Metal circular saw KS 2012
Maschinenbau- und Dienstleistungs GmbH
Saws
Precision metal circular saw
with roller table KS 2012 D
�
�
�
�
�
�
______________A powerful precision
circular saw (with extensive accessories)
designed for professional and demanding use
_______________It can be used for
machining aluminium, steel and non-ferrous
metals
______________The saw shaft which is
infinitely adjustable for height from 0-80 mm
operates at 4300 rpm; the special version
also operates at 2150 rpm.
_______________A machine which is
distinguished by ist mature design
_______________It is ideally suited for
workshops, schools and industry
Machine type
Metal circular saw
Order No.
Price €:
KS 2012 D
462.052
on request
KS 2012 D
462.054
on request
Technical data
Motor three-phase 400 V 2,2 kW 3.0 kW
Speed 4300 rpm
Special speeds
(at extra cost)4300 / 2150 rpm
Diameter of the saw blade Ø 250 mm
Diameter of the saw shaft Ø 30 mm
Height to top edge of table 900 mm
Saw table size, aluminium 750 x 560 mm
Cutting width right 250 mm
Cutting width left 310 mm
Cutting height 80 mm
Height adjustment of the
saw shaft0 – 80 mm
Roller table traverse 250 mm
Weight 95 kg
Standard equipment
1 heavy duty mitre stop 470.060, 1 heavy duty stop rail
467.220, splitting wedge 2.5 mm 463.364, push stick,
operating tool, suction connections Ø 100 mm, motor
protection switch with emergency stop function, evacuatable
clamp cover 461.140. Connection cable with connectors. All
machines have motor protection as standard.
Photo: KS 2012 with 2 stop rails
(extra charge, see accessories)
Photo: KS 2012 with roller sliding table
including 2 stop rails 470.060
(extra charge, see accessories)
Nownew!
Withro
ller tableNow
new!
Withro
ller table
Slide length 250
- 62 -
Flottstr. 25 • 56472 Großseifen • Tel. +49 (0)2661/40484 • Fax. +49 (0)2661/40573 • Email: info@kraeku.de • Website: www.kraeku.de
Circular saw KS 2012
Maschinenbau- und Dienstleistungs GmbH
Saws
Accessories and prices
Accessories Order No. Price €
Heavy duty mitre stop for T-slot 470.060 272.00
Heavy duty stop rail 467.220 320.00
Trolley, with 4 lowerable wheels, only for KS 2011 467.770 380.00
Dolly with galvanised steel roller, roller diameter 50 mm, width 500 mm,
infinitely adjustable height 650-1150 mm494.410 85.00
Dolly with galvanised bearing strip and 7 bearing elements, width 500 mm,
infinitely adjustable height 650-1150 mm494.415 99.00
Metering unit
Connection hose with metering nozzle and magnetic base On request
Metering nozzle with magnetic base
Metering nozzle with tube holder
Waxilit, wax, can 1 kg 498.305 35.00
Silbergleit, wax, can 250 g 498.300 22.00
Tools
Carbide blade for hardwoods & softwoods, Ø 250/30, teeth 30 466.106 75.00
Carbide blade for laminated particle boards, Ø 250/30 mm, teeth 60 466.102 150.00
Carbide blade for aluminium & plastic profiles, Ø 250/30 mm, teeth
80466.103 220.00
Carbide blade for double sided particle boards, Ø 250/30 mm, teeth
48466.105 200.00
Available at extra cost (subsequent attachment not possible)
Two speeds 4300/2150 rpm, output 2.5/1.9 kW 400 V 3-phase 467.970 480.00
Dolly 494410
Dolly 494415
Photo: Metering unit with
various nozzles(Extra charge, see accessories)
Slide length 250
- 63 -
Flottstr. 25 • 56472 Großseifen • Tel. +49 (0)2661/40484 • Fax. +49 (0)2661/40573 • Email: info@kraeku.de • Website: www.kraeku.de
Format circular saw FKS 3000
Maschinenbau- und Dienstleistungs GmbH
Saws
The new format circular saw FKS 3000 for
professionals who redefine arguments such
as precision, performance, convenience and
price.
A solid machine case made of thick-walled
sectional steel ensures high smooth operation,
precise cutsand remains absolutely twist-free when
machining large workpieces.
The large saw table made of grey cast iron is
surface milled, polished and surface tempered, and
guarantees a long service life even when machining
hard materials (non-ferrous metals).
The professional format sliding table with industrial
leading edge technology made of extruded
aluminium is surface milled and surface tempered.
The modern guides with hardened steel guidance
and bearing contact system have outstanding
smooth running properties and are not susceptible
to contamination.
The large dimensioned table arm can be moved
quickly into its vertical position using eccentric
clamps or easily detached. A stable telescopic arm
prevents heavy workpieces from tipping the table
during sawing.
The stop rail with 0° fixing is telescopic and can be
easily adjusted for mitre cuts. The corresponding
degrees setting can be read exactly using a precise
scale.
The saw power unit made of solid grey cast iron
parts is guided precisely on both sides and can be
expanded to hold a scoring saw whereby this can,
on request, be fitted with ist own drive. The
adjustment of cutting height and swivelling of the
sawblade is done using hand wheels on the side of
the machine. The values set can be read exactly
from scales.
The solid longitudinal stop is precisely guided on a
stable scale strip and can be adjusted accurately
with micrometric precision.
�
�
�
�
�
�
�
Photo: FKS 3000 with light angle stop, table
widening to the right and scorer.
(Extra charge, see accessories)
Machine type
Format circular saw FKS 3000
Technical data
Format sliding table, (Aluminium) 1500 ; 2000 ; 2600 ; 3000 x 285
Maximum cutting length 1500 ; 2000 ; 2600 ; 3000 mm
Saw table size (grey cast iron) 1060 x 335 mm
Maximum cutting width 1050 (1500) mm
Swivel range of the saw blade 0° - 45 °
Max. saw blade – Ø 315mm
Scorer – Ø 80 mm
Saw blade holder – Ø 30 mm
Scorer holder – Ø 20 mm
Saw blade speed 3800 rpm
Scorer speed 7600 rpm
Scorer speed, with separate motor 8500 rpm
Max. cutting height of the saw blade 315
mm
100 mm - 0° / 80 mm - 45°
Max. cutting height of the saw blade 250
mm
65 mm - 0° / 55 mm - 45°
Motor output 400 V / 50 Hz 3 kW, (4 PS)
Motor output of the scorer
400 V / 50 Hz (Accessories)
0.5 kW
Suction connections = Ø 100 mm
Noise level with tool 92.9 dB
Weight 420 kg
Standard equipment
Format sliding table with table arm, telescopic arm and angle scale, stop rail
(extendable to 2700 mm), eccentric clamping arm, fine adjustment for
longitudinal stop, evacuatable clamp cover, motor protection switch with
undervoltage release and emergency stop function, operating tool.
- 64 -
Flottstr. 25 • 56472 Großseifen • Tel. +49 (0)2661/40484 • Fax. +49 (0)2661/40573 • Email: info@kraeku.de • Website: www.kraeku.de
Format circular saw FKS 3000
Maschinenbau- und Dienstleistungs GmbH
Saws
Accessories and pricesMachine type Order No. Price €
Format circular saw FKS 3000 with format sliding table 1500
mm and table extension464.001 3,580.00
Format circular saw FKS 3000 with format sliding table 2000
mm and table extension464.002 4,030.00
Format circular saw FKS 3000 with format sliding table 2600
mm and table extension464.003 4,380.00
Format circular saw FKS 3000 with format sliding table 3000
mm and table extension464.004 4,590.00
Accessories
Table widening 1500 mm,
(Extra charge, subsequent attachment not possible)
464.020215.00
Table widening 1500 mm,
(for subsequent attachment)464.025 275.00
Scorer
(Extra charge, subsequent attachment not possible)464.101 138.00
Scorer with own motor, 0.55 kW
(Extra charge, subsequent attachment not possible)464.103 595.00
Angle stop, 2 x 45° adjustable 464.015 130.00
Grey cast iron longitudinal stop with eccentric clamp (Extra charge) 464.018 180.00
SUVA safety cover,, can be evacuated 464.040 340.00
Workpiece roller for extension table 464.011 130.00
Trimming shoe 464.013 30.00
Dust extraction see category >Extraction<
Additional safety equipment see category >Safety<
Tools
Carbide scorer saw blade, Ø80 x 2.8-3.6 x 20mm, 20Z 464.105 178.00
Carbide circular saw blade for hardwood & softwood, Ø 250x3.2x30
mm, 30Z466.106 80.00
Carbide circular saw blade for laminated particle boards, Ø 250x3.2x30
mm, 60Z466.102 152.00
Carbide circular saw blade for aluminium & plastic, Ø 250x3.2x30 mm,
80Z466.103 222.00
Carbide circular saw blade for laminated particle boards, Ø 250x3.2x30
mm, 48Z466.105 202.00
Carbide circular saw blade for hardwood & softwood, Ø 300x3.2x30
mm, 30Z464.107
Carbide circular saw blade for hardwood & softwood, Ø 300x3.2x30
mm, 60Z464.109
Carbide circular saw blade for hardwood & softwood, Ø 300x3.2x30
mm, 80Z464.111
Sawbade with counterrotating scorer
Heavy duty longitudinal stop with
eccentric clamp
Additional support roller on extension
SUVA safety cover, can be evacuated
Trimming shoe Mitre stop, 2 x 45 ° adjustable
External scorer adjustment for
separate drive motor
The most up to date guidance
technology ensures high smooth running
Saw power unit with separate motor for
the scorer.
- 65 -
Flottstr. 25 • 56472 Großseifen • Tel. +49 (0)2661/40484 • Fax. +49 (0)2661/40573 • Email: info@kraeku.de • Website: www.kraeku.de
Bandsaw BS 315
Maschinenbau- und Dienstleistungs GmbH
Saws
The bandsaw which does not
leave anything to be desired
In compact design for wood, plastics
and metals.
Tiltable table 0-45°
Two speeds
Aluminium table with slots for
longitudinal and mitre stops
Sawblades for practically all
applications
Simple and precise adustment
and tensioning of the sawblade
Suction connections Ø 100 as
standard
�
�
�
�
�
�
Longitudinal cuts
Sawing mitres
Sawing mitres Bandsaw with movable machine stand.
Extra charge, see accessories
Precise cuts on running band
Machine type Order No.
Bandsaw with 2 speeds including stand (not
portable)
Price €:
BS 315
491.130
930.00
Technical data
Table size 500 x 500 mm
Tiltable table 0 - 45°
Cutting height 200 mm
Throat depth 315 mm
Motor output 230 V / 50 Hz 1.1 kW
Speed range 2 speeds
Drive roller 1000 rpm
Band speed 6.3 / 14.7 m/sec.
Weight 54 kg
Protection class IP 54
Standard equipment
Bandsaw blade, longitudinal stop, mitre stop, connection cable with
Schuko plug,
- 66 -
Flottstr. 25 • 56472 Großseifen • Tel. +49 (0)2661/40484 • Fax. +49 (0)2661/40573 • Email: info@kraeku.de • Website: www.kraeku.de
Bandsaw BS 315
Maschinenbau- und Dienstleistungs GmbH
Saws
Accessories and pricesMachine type Order No. Price €
Bandsaw BS 315 with 2speeds including stand (not
movable)491.130 930.00
Accessories
Machine stand, movable 491.740 205.00
Dolly with galvanised steel roller, roller diameter 50 mm,
width 500 mm, infinitely adjustable height 650-1150 mm494.410 85.00
Dolly with galvanised bearing strip and 7 bearing elements,
width 500 mm, infinitely adjustable height 650-1150 mm494.415 99.00
Dust extraction see category >>Extraction<<
Tools
Bandsaw blade for wood, plastic, small radii
2215 x 4 x 0.4 mm 12 Z/“ VPE 2 pcs/pair491.140 57.00
Bandsaw blade for wood, plastic, radii
2215 x 6 x 0.4 mm 6 Z/“ VPE 2 pcs/pair491.142 57.00
Bandsaw blade for wood, plastic, general
2215 x 10 x 0.4 mm 12 Z/“ VPE 2 pcs/pair491.144 57.00
Bandsaw blade for wood, plastic, longitudinal cuts
2215 x 16 x 0.4 mm 4 Z/“ VPE 2 pcs/pair491.146 57.00
Bandsaw blade for wood, plastic, longitudinal cuts
2215 x 20 x 0.4 mm 4 Z/“ VPE 2 pcs/pair491.148 57.00
Bandsaw blade for wood, plastic, radii
2215 x 6 x 0.4 mm 12 Z/“ VPE 2 pcs/pair491.150 57.00
Bandsaw blade for non-ferrous metals, plastic, straight cuts
2215 x 12 x 0.65 mm 14 Z/“ VPE 2 pcs/pair491.152 57.00
Accessories for bandsaw BS 260 (discontinued
model)Order No. Price €
Machine stand, movable 491.775 216.00
Mitre stop, with stop rail and stop 491.107 168.00
Circle cutter attachment, Ø 42-540 mm 491.108 175.00
Grinding attachment 491.109 115.00
Connection cable, 3 m long, alternating current 488.762 56.00
Tools
Bandsaw blade f wood, 1875 x 6 x 0.4 mm, 7 Z/“ VPE 2 pcs(pair 491.111 36.00
Bandsaw blade f wood, 1875 x 12 x 0.4 mm, 7 Z/“ VPE 2 pcs/pair 491.112 36.00
Bandsaw blade f wood, 1875 x 12 x 0.4 mm, 5 Z/“ VPE 2 pcs/pair 491.113 36.00
Bandsaw blade f fine cuts 1875 x 3 x 0.4 mm, 7 Z/“ VPE 2 pcs/pair 491.114 36.00
Bandsaw blade f metal & plastic ,1875 x 6 x 0.4 mm, 12 Z/“ VPE 2
pcs/pair491.115 36.00
Bandsaw blade f metal & plastic,1875 x 12 x 0.4 mm, 12 Z/“ VPE
2 pcs/pair491.116 36.00
Band cutter for foam, 1875 x 10 x 0,5 mm, 4 Z/“, VPE 2 pcs/pair 491.117 44.00
Abrasive belt, 1875 x 15 mm, grain 60, pack of 10 pcs 491.118 44.00
Abrasive belt, 1875 x 15 mm, grain 100, pack of 10 pcs 491.119 44.00
Previous model BS 260
Dolly 494415
Dolly 494410
- 67 -
Flottstr. 25 • 56472 Großseifen • Tel. +49 (0)2661/40484 • Fax. +49 (0)2661/40573 • Email: info@kraeku.de • Website: www.kraeku.de
Bandsaw BS 400
Maschinenbau- und Dienstleistungs GmbH
Saws
The electronic precision bandsaw with
the large throat depth
for wood, plastics and non-ferrous metals.
The ideal machine for craftsmen, schools and
home workers.
With electronically controlled infinitely
variable motor speeds for setting the band
speed
With three-phase current from the AC
socket and exemplary operating comfort
Three-roller precision band guidance
Stable case made of die-cast aluminium
Simple, consistent band tensioning
Dynamically balanced roller with special
coating, low-noise operation
Sawblades and band cutters for many
applications
Tiltable table 0-45°
Aluminium table machined on all sides
with slots for longitudinal and mitre stop
Numerous accessories
�
�
�
�
�
�
�
�
�
�
With
GSqualit
y mark
dust teste
d
Machine type
Bandsaw
Order No.:
Price €:
BS 400 electronic
491.770
2,530.00
BS 400 D
491.771
2,210.00
Technical data
Motor three-phase 0.55 kW *,400 V 0.55 kW, 400 V
Speed ranges 400-1800 rpm 1450 rpm
Band speed 4,2 –18,8 m/sec. 14,5 m/sec.
Table size 400x400 mm 400x400 mm
Cutting height 160 mm 160 mm
Throat depth 400 mm 400 mm
Tiltable table 0-45° 0-45°
Weight 40 kg 40 kg
Protection class IP 54 IP 54
* Connection 230 Volt AC
Alternating current with electronic conversion to three-phase current
Standard equipment
Bandsaw blade 491711, padlockable motor protection switch with
undervoltage release and emergency stop function, operating tool, suction
plate 483575 with Ø100 mm connections, longitudinal stop 490.045.
Sawing mitresFor BS 400 electronically controlled
infinitely variable speed
Sawing with
circle cutter attachment
Sawing mitres
Grinding with
grinding attachment
Longitudinal cuts
Photo: Bandsaw with movable machine
stand 491740 and mitre stop 490040.
(Extra charge, see accessories)
Infin
itely
variable
cutting
speed
- 68 -
Flottstr. 25 • 56472 Großseifen • Tel. +49 (0)2661/40484 • Fax. +49 (0)2661/40573 • Email: info@kraeku.de • Website: www.kraeku.de
Bandsaw BS 400
Maschinenbau- und Dienstleistungs GmbH
Saws
Accessories and pricesMachine type Order No. Price €
Bandsaw BS 400 electronic 491.770 2,530.00
Bandsaw BS 400 D 491.771 2,210.00
Accessories
Connection cable, 3 m long, alternating current 488.762 56.00
Machine stand, movable 491.740 205.00
Machine cabinet evacuatable 491.100 670.00
Suction connections with mounting plate for Ø 100
mm483.575 85.00
Grinding attachment 491.790 138.00
Mitre stop, adjustable 2 x 45 ° 490.040 115.00
Longitudinal stop, with two-sided stop area 490.045 79.00
Circle cutter attachment, for Ø 400 mm, with bolt 491.600 88.00
Additional table, rear, dimensions 400x250 mm,
with bolts491.590 160.00
Additional table, right, dimensions 400 x 250
mm, with bolts491.595 170.00
Dolly with galvanised steel roller, roller diameter 50
mm, width 500 mm, infinitely adjustable height 650-
1150 mm
494.410 85.00
Dolly with galvanised bearing strip and 7 bearing
elements, width 500 mm, infinitely adjustable height
650-1150 mm
494.415 99.00
Dust extraction see category >Extraction<
Additional safety equipment see category
>Safety<
Tools
Abrasive belt 2110 x 20 mm, grain 60, pack of 10 pcs. 491.801 65.00
Abrasive belt 2110 x 20 mm, grain 100, pack of 10 pcs. 491.803 65.00
Bandsaw blade for wood, 2110 x 6 x 0.4 mm, 7 Z/“
Packing unit 2 pcs/pair491.710 50.00
Bandsaw blade for wood, 2110 x 12 x 0.4 mm, 7 Z/“
Packing unit 2 pcs/pair491.711 50.00
Bandsaw blade for wood, 2110 x 12 x 0.4 mm, 5 Z/“
Packing unit 2 pcs/pair491.712 50.00
Bandsaw blade for metal and plastic,
2110 x 6 x 0.4 mm, 12 Z/“, packing unit 2 pcs/pair491.720 50.00
Bandsaw blade for metal and plastic,
2110 x 12 x 0.4 mm, 12 Z/“, packing unit 2 pcs/pair491.721 50.00
Band cutter for foam, 2110 x 10 x 0.4 mm, 4 Z/“,
packing unit 2 pcs/pair491.730 50.00
Circle cutter attachment
491600
Grinding
attachment 491790
Photo: Evacuatable
machine cabinet
Mitre stop 490040
Additional safety equipment,
see category >Safety<
- 69 -
Flottstr. 25 • 56472 Großseifen • Tel. +49 (0)2661/40484 • Fax. +49 (0)2661/40573 • Email: info@kraeku.de • Website: www.kraeku.de
AD 250 S
Dressing and thickness planing machine
Maschinenbau- und Dienstleistungs GmbH
Planing
Dressing and thickness planing machine 250
S
A solid machine, mature and proven thousands
of times.
Solid cast in one piece machine case, twist
free and robust, ensures very high degree of
smooth running.
Surface milled cast-iron planing tables
provide high precision of the workpieces.
Easy adjustment of the thickness planig
table via hand wheel, pivoted wear-free in a
grey cast iron column guide.
Low-noise, maintenance free Ultramid feed
gear with robust chain drive and floating
steel feed rollers.
Easily detachable dressing table for the
thickness planing.
Dynamically balanced blade shaft with
HSS planing blades ensures high chip
removal.
Safety equipment such as blade shaft
cover, recoil protection, reversible chip cover
or suction hood make safe working possible.
Extensive safety accessories for use in
schools and training workshops.
�
�
�
�
�
�
�
�
Photo:
Dressing and thickness
planing machine 250 S with
movable machine
stand.(Extra charge, see
accessories)
Machine type
Dressing and
thickness planing
machine
Order No.Price €
250 SD,
400 V
488.001
1,980.00
250 SW,
230 V
488.003
1,980.00
Technical data
Dressing and thickness
planing width250 mm
Plane thickness 150 mm
Dressing table length 1000 mm
Thickness table length 500 mm
Blade shaft speed 6400 rpm.
Feeder speed 602 m/min.
Max. chip removal 3 mm
Motor power
Three-phase 400 V 2.2 kW / 3.0 PS
AC 230 V 1.3 kW / 1.8 PS
Weight 95 kg
Standard equipment
Plane blade 498.242, blade shaft cover 488.129, longitudinal stop
488.290, motor protection switch with undervoltage release,
connection cable with connectors, chip cover 488.170, suction
hood with connections Ø 100mm 488.180, operating tool.
Dressing planing with
Facing with joining strip and
joint stop, adjustable from 0 to
45°.
Thickness planing with
- 70 -
Flottstr. 25 • 56472 Großseifen • Tel. +49 (0)2661/40484 • Fax. +49 (0)2661/40573 • Email: info@kraeku.de • Website: www.kraeku.de
Dressing and thickness planing machine
AD 250 S
Maschinenbau- und Dienstleistungs GmbH
Planing
Accessories and prices
Additional safety equipment,
see page
Precision adjustment gauge 488284
Plane blade 498242
Dolly 494410
Dolly 494415
Machine type Order No. Price €
Dressing & thickness planing machine 250 SD,
400 V
488.0011,980.00
Dressing & thickness planing machine 250 SW,
230 V
488.0031,980.00
Accessories 250 S
Machine stand, movable 488.760 199.00
Machine cabinet, lockable, made of sheet metal 488.970 460.00
Trolley, with 3 lowerable wheels for machine cabinet 487.100 285.00
Precision adjustment gauge with dial, for adjusting the plane
blade488.284 122.00
Leaf strip 488.210 110.00
Suction hood Ø 100 mm 488.180 103.00
Chip cover 488.170 93.00
Wooden block for dressing short workpieces 488.220 18.00
Waxilit, wax, can 1 kg 498.305 35.00
Silbergleit, wax, can 250 g 498.300 22.00
Dust extractor for attachment see category >>Extraction<<
Additional safety equipment see page >>Safety<<
Dolly with galvanised steel roller, roller diameter 50 mm, width 500
mm, infinitely adjustable height 650-1150 mm494.410 85.00
Dolly with galvanised bearing strip and 7 bearing elements, width
500 mm, infinitely adjustable height 650-1150 mm494.415 99.00
Tools
Plane blade, HSS, 18% tungsten, extremely high service life,
Pair 252 x 25 x 3 mm498.242 105.00
- 71 -
Flottstr. 25 • 56472 Großseifen • Tel. +49 (0)2661/40484 • Fax. +49 (0)2661/40573 • Email: info@kraeku.de • Website: www.kraeku.de
AD 310 / AD 410
Dressing and thickness planing machine
Maschinenbau- und Dienstleistungs GmbH
Planing
The new, powerful, solid top-class
thickness planing machine.
Optim
Solid machine case made of sectional
steel, twist-free and robust, ensures
high smooth running.
Large, surface milled and polished
ensure high precision of the workpieces.
Easy adjustment of the thickness
planing table via hand wheel pivoted
wear-free in a
Absolutely safe against
tipping.
Low-noise feeder gear can be
switched on and off, with robust chain
drive and floating steel feed rollers.
Large dressing and joining stop, no
deviation, precisely guided and easy to
adjust. Infinitely adjustable swivel range
with fixing at 90° and 45°.
Dynamically balanced blade shaft with
4 HSS plane blades ensures high chip
removal and convincing planing result.
Safety equipment such as Suva guard
for blade shaft, recoil protection, chip
cover with suction hood and emergency
stop pushbutton make safe working
possible.
Extensive safety accessories for use in
schools and training workshops.
um technology and
performance at an extremely
favourable price-performance ratio.
planing tables made of grey cast iron
grey cast iron central
spindle guide.
�
�
�
�
�
�
�
�Photo: AD 310 with
universal moving device
Chip cover for the dressing and
thickness planing machine with
suction connections Ø 100 mm.
Large joint stop, infinitely
adjustable from 90 - 45°.
Polished dressing tables made
of grey cast iron.
Grey cast iron central spindle
guide. Feeder gear can be
switched on and off. Additional
roller for thickness table.
Machine type
Dressing & thickness
planing machine
Order No.
Price €
AD 310
488.501
2,130.00
AD 410
488.601
3,200.00
Technical data
max. dressing width 310 mm 410 mm
max. thickness planing width 300 mm 400 mm
max. planing thickness 230 mm 230 mm
Thickness table size 750 x 308 mm 720 x 410 mm
Dressing table size 1270 x 330 mm 1600 x 440 mm
Machine height 1080 mm 1080 mm
Blade shaft speed 4200 rpm 4200 rpm
Number of blades 4 . 4 .
Feeder speed 8 m/min. 8 m/min.
max. chip removal 4 – 5 mm 4 – 5 mm
Angle adjustment joining stop 0° - 45° 0° - 45°
Suction connections Ø 100 mm Ø 100 mm
Motor power
Three-phase 400 V / 50 Hz 2.2 kW / 3.0 PS 3.7 kW / 5.0 PS
AC 230 V / 50 Hz 2.2 kW / 3.0 PS 2.2 kW / 3.0 PS
Weight 242 kg 342 kg
Standard equipment
4 plane blades, blade shaft cover, adjustable longitudinal stop, feeder
disconnection, connection cable with CEE connectors, motor
protection switch with undervoltage release, emergency stop switch,
motor with brake, suction hood, operating tool.
- 72 -
Flottstr. 25 • 56472 Großseifen • Tel. +49 (0)2661/40484 • Fax. +49 (0)2661/40573 • Email: info@kraeku.de • Website: www.kraeku.de
Dressing and thickness planing machine
AD 310 / AD 410
Maschinenbau- und Dienstleistungs GmbH
Planing
Additional safetz
equipment, see
category >>Safety<<.
Precision adjustment gauge 488284
Dolly 494415
Dolly 494410
Machine type Order No. Order No. Price €
Dressing & thickness planing machine AD 310 AD 410
Accessories
AC motor 3 PS, 220V, 50Hz (extra charge) 488.509 - 88.00
Additional roller for thickness table AD 310 488.513 - 65.00
Additional roller for thickness table AD 410 - 488.515 65.00
Universal moving device 488.511 488.511 121.00
Long hole milling attachment LF 310 / LF 410, (can be
retrofitted)
incl. 16 mm drill chuck and eccentric clamping arm.
488.520 488.520 599.00
Precision adjustment gauge with dial, for adjusting the plane
blade488.284 488.284 122.00
Wooden block for dressing short workpieces 488.220 488.220 18.00
Waxilit, wax, can 1 kg 498.305 498.305 35.00
Silbergleit, wax, can 250 g 498.300 498.300 22.00
Joint strip for AD 310 (see category >>Safety<<) 488.510 - 115.00
Dolly with galvanised steel roller, roller diameter 50 mm, width
500 mm, infinitely adjustable height 650-1150 mm494.410 494.410 85.00
Dolly with galvanised bearing strip and 7 bearing elements, width
500 mm, infinitely adjustable height 650-1150 mm494.415 494.415 99.00
Dust extractor for attachment see category >>Extraction<<
Additional safety equipment see category >>Safety<<
Tools
Plane blade, for AD 310, Set of 4 pcs. 488.542 - 120.00
Plane blade, for AD 410, Set of 4 pcs. - 488.544 166.00
Accessories and prices
Plane blade 488.542
Table size : ____ 460 x 190 mm
Drill chuck :____ 16 mm
Long hole height:____ max. 125 mm
Lengthways movement :
max. 180 mm
Transverse movement: max.
Technical data:
Long hole milling attachment LF 310
/ 410 (can be retrofitted) including 16
mm drill chuck and eccentric clamping
arm.
All parts are manufactured from solid
grey cast iron, surface milled drill table
with T/slot, four end stops, easily
adjustable on all sides using operating
lever.
- 73 -
Flottstr. 25 • 56472 Großseifen • Tel. +49 (0)2661/40484 • Fax. +49 (0)2661/40573 • Email: info@kraeku.de • Website: www.kraeku.de
Table milling machine TF 9000
Maschinenbau- und Dienstleistungs GmbH
Milling
Our new design top-class table milling
machine, which is distinguished by
extremely robust quality and high
performance and leaves nothing to be
desired, even for professionals.
Large area
, surface milled and polished.
Powerful, dynamically balanced milling spindle,
solidly pivoted in a
, ensures absolutely smooth running and
precision.
Enclosed milling cavity with integrated chip
extraction channell
Easily adjustable spindle vertical stroke of 130
mm using hand wheel.
A powerful motor with . and 4
different speed ranges also provides convincing
results with large tools and hard materials.
Quick speed change by replacing the belt
using eccentric tensioning.
Solid, machine case made of sectional steel
absorbs vibrations and ensures high smooth
running.
Precise, large milling stop with fine adjustment
machine table made of grey cast
iron
grey cast iron spindle
guide
2 3 KW output
Spindle pivoting supported on both sides
with wear-free and torsion-free cast iron
segments adjustable using hand wheel with
precise scaling (only for TF9000DS).
�
�
�
�
�
�
�
�
�
Photo:
TF 9000 DS
Machine type
Table milling machine
Order No.
Price €:
TF 9000 D
482.520
2,450.00
TF 9000 DS
482.515
2,605.00
Technical data
Machine table size 1000 x 476 mm 1000 x 476 mm
Machine table height 856 mm 856 mm
Spindle length 130 mm 130 mm
Spindle Ø 30 mm 30 mm
Spindle stroke max. 130 mm 130 mm
Spindle pivoting -- -5° to +45°
Spindle speed (x1000) 1.4 / 3.5 / 6.0 /
8.0 rpm
1.4 / 3.5 / 6.0 /
8.0 rpm
Tool Ø max.
over table
200 mm 200 mm
Tool Ø max.
under table
175 mm 175 mm
Table drilled hole Ø 178 mm 220 mm
Suction connections 100 mm 100 mm
Motor power 400V, 50Hz 2.3 kW 2.3 kW
Weight 170 kg 200 kg
Standard equipment
Motor protection switch with undervoltage release and emergency
stop switch, connection cable with CEE connectors, fine adjustment
for milling stop with stop ruler, 4 spacer rings, 4 table inlays, 4 contact
springs, suction connections Ø 100 mm with branch Ø 50 mm,
operating tool.
Photo:
Table milling machine TF 9000
D with sliding table.
Extra charge, see accessories
- 74 -
Flottstr. 25 • 56472 Großseifen • Tel. +49 (0)2661/40484 • Fax. +49 (0)2661/40573 • Email: info@kraeku.de • Website: www.kraeku.de
Table milling machine TF 9000
Maschinenbau- und Dienstleistungs GmbH
Milling
Accessories and prices
Safety milling head with
profile cutter
Roll adjustment slots
Rebating cutter
Accessories Order No. Price €
Sliding table with stop rail and tool clamp
Scope of delivery: heavy duty sliding table made of grey
cast iron, 7 ball bearings, 500x400 mm, stop rail can be
swivelled 2x45°, telescopic longitudinal stop up to 1700 mm
with 2 fold stops and workpiece clamp
482.525 990.00
AC motor 2.2 kW, 230V, 50Hz (Extra charge) 482.530 88.00
Universal moving device 488.511 121.00
Interchangeable spindle, for fast tool change (extra
charge)482.550 185.00
Replacement spindle for interchangeable spindle
(optionally Ø 30, 40 or 50 mm)482.552 155.00
Spindle with chuck holder and speed increase to 10,000
rpm
(for holding routing tools)
482.555 150.00
Right and left table widening 482.545 78.00
Table extension, for front or rear, length 1000 mm, width
200 mm482.700 230.00
Protective guard, with guard ring, for milling cambered
workpieces, Ø 150 mm482.640 100.00
Tenon cutter 482.540 40.00
Tenon protection 482.540 259.00
Dust extraction see category >>Extraction<<
Tools
Ball bearing bushing, Ø 62 mm, with lock washer,
required for all thrust rings482.686 98.00
Thrust rings, Ø 65 mm 482.688 35.00
Thrust rings, Ø 70 mm 482.689 28.00
Thrust rings, Ø 75 mm 482.690 30.00
Thrust rings, Ø 80 mm 482.691 34.00
Thrust rings, Ø 85 mm 482.692 39.00
Thrust rings, Ø 90 mm 482.680 48.00
Rebate cutter with reversible carbide tips,
Ø 125 mm, width 30 mm, drilled hole Ø 30 mm482.810 368.00
Rebate cutter, Ø 90 mm, width 40mm, drilled hole Ø 30mm 482.815 199.00
Roll adjustment slots, HSS, Ø 150 mm, slot width 4-14
mm, slot depth 31 mm, drilled hole Ø 30 mm482.820 479.00
Roll adjustment slots, carbide, Ø 150 mm, slot width 4-14
mm, slot depth 31 mm, drilled hole Ø 30 mm482.821 605.00
Safety milling head, Ø 100 mm, width 40 mm, drilled hole
Ø 30 mm, with 2 rebate cutters, deflector plates, adjusting
ring and spanner
482.920 260.00
Safety milling head, with 6 profile cutter sets
Dimensions and accessories as above, with case482.925 615.00
Safety milling head, with 10 profile cutter sets
Dimensions and accessories as above, with case482.930 649.00
Complete profile cutter set with deflector plates ,10 pairs 482.935 496.00
Other profiles on request
Grinding drum, Ø 80 x Ø 30 mm, length 120 mm, with 5
assorted abrasive coatings, with slide, bolt and spanner382.800 168.00
Grinding drum coatings for grinding drum Ø 80 mm, grain
60, 5 pcs.382.801 45.00
Grinding drum coatings for grinding drum Ø 80 mm, grain
100, 5 pcs382.802 45.00
- 75 -
Flottstr. 25 • 56472 Großseifen • Tel. +49 (0)2661/40484 • Fax. +49 (0)2661/40573 • Email: info@kraeku.de • Website: www.kraeku.de
Lathe DB 200 electronic
Maschinenbau- und Dienstleistungs GmbH
Turning
Lathe with trendsetting
technical advantages
For turners, home workers and
schools
Smooth running and steady
due to stable metal case for
headstock and tailstock
Infinitely variable electronic
speed control with large speed
range
Digital speed indicator
(accessories)
Powerful motor
Spindle holder right and left
Hollow bored tailstock
(accessories)
Expandable to drive unit or
grinding centre using extensive
accessories
�
�
�
�
�
�
�
Photo: DB 200 with copying attachment.
(Extra charge, see accessories)
Photo: DB 200 as table model with drive-in
chuck and short machine bed. Machine beds
are available in various lengths. (Accessories)
Photo: DB 200 as grinding centre with
adapter left, short machine bed, large
face plate 484125, grinding table
484127 and mitre stop 463650.
(Accessories)
Machine types Order No. Price €
DB 200 electronic
Distance between centres 850 mm 484.505 1,554.00
Distance between centres 1100 mm 484.507 1,585.00
Technical data
Spindle axis height over bed 200 mm
Distance between centres 850 or 1100 mm
Motor output P1 230 V / 50 Hz 1,1 kW
Speed range 340 – 4000 1/min.
Spindle holder, right M33, DIN 800
Spindle taper, right MK 2
Spindle holder, left Ø 20 mm, M16 left
Tailstock taper MK 2
Weight 52 kg
Standard equipment
Switch with thermal protection and undervoltage release, connection
cable with connectors, face driver, live centre, operating tool
- 76 -
Flottstr. 25 • 56472 Großseifen • Tel. +49 (0)2661/40484 • Fax. +49 (0)2661/40573 • Email: info@kraeku.de • Website: www.kraeku.de
Lathe DB 200
Maschinenbau- und Dienstleistungs GmbH
Turning
Accessories and pricesMachinetypes Order No. Price€
DB200electronic
Distancebetweencentres850mm 484.505 1,554.00
Distancebetweencentres1100mm 484.507 1,585.00
Accessories
Longitudinal copyingattachment for DB200electronic, distancebetweencentres850mm,
With lathetubesR2.5mm, copying length50mm484.915 1,676.00
Longitudinal copyingattachment for DB200electronic, distancebetweencentres1100mm,
With lathetubesR2.5mm, copy length1000mm, copydepth50mm484.905 1,759.00
L- Package, consistingof: faceplateØ80mm, 483.320, faceplate(grindingdisc) Ø150mm,383.330,
drive-inchuckØ35mm, 484.111, drill chuck1- 13mm, withholder MKII, 483.380, grindingtable
200x200mm, 384.770, 1set eachof coarseandfeinabrasivecoatingsandadhesivecoating
483.400 385.00
Livecentre, MKII, heavydutydesign 483.666 225.00
Livecentre, MKII, withpressurering 483.665 240.00
Special facedriver, Ø50mm, for largeworkpiecediameters (4) 484.090 142.00
Faceplate, Ø80mm, withcentringbolt (6) 483.320 82.00
Faceplate (grindingdisc), Ø150mm(7) 383.330 120.00
Faceplate (grindingdisc), Ø280mm 384.125 168.00
Drive-inchuck (tonguechuck), 3pcs, Ø35, Ø50, Ø70mm 484.110 175.00
Drive-inchuck (tonguechuck), Ø35mm(5) 484.111 65.00
Drive-inchuck (tonguechuck), Ø50mm 484.112 70.00
Drive-inchuck (tonguechuck), Ø70mm 484.113 74.00
Keylesschuck, 1- 13mm, MKII, with taperedmandrel B16 483.380 82.00
Keylesschuck, 3- 16mm, MKII, with taperedmandrel B18 483.385 95.00
Steel support for insideturning 484.650 58.00
Grindingtable, 200x200mm, without T-slots (8) 384.770 115.00
Grindingtable, 250x320mm, withT-slots 384.127 176.00
Roundpartsgrindingattachment, only incombinationwithgrindingtable 384.127 384.121 72.00
Mitrestop, only incombinationwithgrindingtable384.127 463.650 124.00
Special collet chuckSF50, accessoriesonrequest (3) 483.300 303.00
1set of light dutylathetools, 4pcs. 483.310 112.00
1set of heavydutylathetools, 3pcs. 483.410 168.00
Conedapter (M33B16requiredfor Parts11,14,15) (10) 384.713 70.00
Adapter set consistingof conical, cylinder grindingdrummandrel 384.729 160.00
Special equipment
Subframe, subsequent attachment possible 484.680 315.00
Tailstock, hollowbored, Ø8mm, (extracharge) 484.260 106.00
Tailstockcentre, hollowbored 484.597 74.00
Tools
Lathetubes, R5mm 483.671 130.00
Lathetubes, R2,5mm 483.673 165.00
Grindingdisccoatings, Ø150mm, grain60, 5pcs. 384.611 19.00
Grindingdisccoatings, Ø150mm, grain100, 5pcs. 384.612 19.00
Adhesivecoating, Ø150mm 384.610 16.00
Adhesivecoating, Ø280mm 384.170 25.00
Abrasivecoatings, Ø280mm, grain60, 5pcs. 384.166 21.00
Abrasivecoatings, Ø280mm, grain100, 5pcs 384.167 21.00
Measuringtools, insidecalliper, outsidecalliper, dividers, carpenter’ssquare 484.300 95.00
Oil stone, medium, withdifferent radii onbothsides 483.365 39.00
14
6
5
4
3
9
8
7
15
1
2
10
11
12
13
- 77 -
Flottstr. 25 • 56472 Großseifen • Tel. +49 (0)2661/40484 • Fax. +49 (0)2661/40573 • Email: info@kraeku.de • Website: www.kraeku.de
High performance extraction equipment
Maschinenbau- und Dienstleistungs GmbH
Extraction
Scope of delivery HA 900
Scope of delivery KRÄKUmat
Connection cable with connectors, plastic bag, 2.5 m suction hose, filter bag Cat. G
(BIA-tested).
Connection cable with connectors, plastic bag, 1.8 m suction hose, filter bag.
Machine type
High performance
extractor
Order No.
Price €:
HA 900
Portable
483.644
498.00
KRÄKUmat
Portable
483.840
815.00
Technical data
Air flow 865 m³/h 1000 m³/h
Chip collecting capacity approx. 70 l approx. 90 l
Motor power 230V/50Hz 0.75 kW 0.37 kW
Speed 2830 rpm 2800 rpm
Dimensions (H x W x D) 1650 x 888 x 577 mm 1660 x 900 x 460 mm
Hose connection 100 mm 100 mm
Weight 24 kg 38 kg
For collecting chippings and dust: however, not suitable
for reduction of wood dust in the breathable air.
Photo: KRÄKUmat
The smallest machines in our
range are distinguished by their
robust, high quality design and
their low power consumption.
The aerosol-generated air dust
extractor HA 900 and Flottomat are
universally usable, especially in the
areas of hobby woodworking, plastic,
metal and paper. Their BIA.tested G
filter material guarantees a high
degree of separation. Due to their
optimised fan technology, the
machines provide maximum suction
and air flow performance.
The case parts and the fan wheels
consist of high strength special
plastic (for HA 900) and sheet metal
(for Flottomat) and have a very long
service life, even in continuous
operation. Their compact
dimensions, their low weight and the
quick-action closures for filter and
dust bags provide flexible handling
and maintenance without problems.
Accessories Order No. Price €
Floor cleaning set, metal 483.852 170.00
Suction nozzle, flat dimensions Ø 100x134/25x300 mm 483.853 29.00
Accessories for chip extractor Order No. Price €
Filter cartridge for KRÄKUmat 483.843 382.00
Filter cartridge for KRÄKUmat with manual shaking 483.844 465.00
Filter cartridge for KRÄKUmat with motor-driven shaking 483.845 742.00
Replacement linen sack for 483.840 (KRÄKUmat) 483.821 71.00
Plastic sack (KRÄKUmat), 2 pcs., L = 950 mm, Ø 500 mm 483.842 5.00
Plastic sack (HA 900), 5 pcs. 483.646 16.00
Suction hose, flexible, Ø 100 mm, 1 m length 483.526 33.00
U-tube without slider, for connecting 2 machines, Ø 100 mm 483.527 180.00
U-tube with slider, for connecting 2 machines, Ø 100 mm 483.528 240.00
Suction connections with fixing plate, for bandsaw BS 400, with stand. 483.575 79.00
Suction hood with connections Ø 100 mm for dressing and planing machine 250 488.180 103.00
Retrofit set for extraction from older circular saws, consisting of: top clamp
cover for splitting wedge with branch connections Ø 100 mm, suction hose461.140 195.00
Floor cleaning setSuction nozzle
Photo: HA 900
- 78 -
Flottstr. 25 • 56472 Großseifen • Tel. +49 (0)2661/40484 • Fax. +49 (0)2661/40573 • Email: info@kraeku.de • Website: www.kraeku.de
High performance extractors
Maschinenbau- und Dienstleistungs GmbH
Extraction
The professional equipment
for use in businesses and
schools
Suitable for the separation of
wood dust. Remaining dust
content stage 2; 0.2 mg/m³
safely complied with.�
�
�
�
High performance pocket filter
with surface coating with long
service life. Also for problem
dusts (paintwork etc.)
Cleaning by manual shaking
using convenient leverl
Changing the chippings sack
can be carried out easily using
fold out filling container
High mobility and easy
handling due to low weight and
compact design
Floor cleaning set, metal 483.852 170.00
Suction nozzle, flat dimensions: Ø 100x134/25x300 mm 483.853 29.00
Chip sack for HA 1500 (20 pcs.) 483.763 49.00
Chip sack for HA 2010 (20 pcs.) 483.805 49.00
Pocket filter complete with mounting plate (set of 4 pcs.) HA 1500 / 2010 483.769 420.00
Suction hose, flexible, Ø 100 mm, 1 m length 483.526 35.00
U-tube without slider, for connecting 2 machines, Ø 100 mm 483.527 191.00
U-tube with slider, for connecting 2 machines, Ø 100 mm 483.528 250.00
Suction connections with mounting plate, for bandsaw BS 400, with machine
stand483.575 85.00
Suction hood with connections Ø 100 mm or dressing and planing machine 250 S 488.180 110.00
Retrofit set for extraction from older circular saws, consisting of: top clamp
cover for splitting wedge with branch connections Ø 25 and Ø 100 mm, suction hose461.140 155.00
Floor cleaning set, metal 483.852 170.00
Photo: HA 2010
Photo: HA 1500
Lieferumfang
Anschlusskabel mit Stecker, Plastiksack, 2,0 m Saugleitung.
Machine type
High performance
extractor
Order No.
Price €:
HA 1500 W
Portable
483.740
1.850,00
HA 1500 D
Portable
483.775
2.070,00
HA 2010 W
Portable
483.800
2.240,00
HA 2010 D
Portable
483.802
2.285,00
Technical data
Nominal volume flow rate
(with 2 m suction hose)700 m³/h 800 m³/h 700 m³/h 800 m³/h
Minimum flow rate 565 m³/h
Filter cleaning Manual shaking
Chip collection capacity approx. 100 l approx. 135 l
Flow rate monitoring Vacuum manometer
Motor, rated output0.75 kW / 230 V
50 Hz
2.2 kW / 400 V
50 Hz
0.75 kW / 230 V
50 Hz
1.5 kW / 400 V
50 Hz
Dimensions (H x W x D)1680 x 1090 x
580 mm
1680 x 1090 x
580 mm
1680 x 1090 x
580 mm
1680 x 1090 x
580 mm
Hose connection 100 mm
Weight 55 kg 57 kg 96 kg 97 kg
Suitable for separation of wood dust.
Remaining dust content stage 2; 0.2 mg/m³ safely
Suction nozzle
Floor cleaning set
With GS quality mark
dust tested H2
- 79 -
Flottstr. 25 • 56472 Großseifen • Tel. +49 (0)2661/40484 • Fax. +49 (0)2661/40573 • Email: info@kraeku.de • Website: www.kraeku.de
High performance extractors
Maschinenbau- und Dienstleistungs GmbH
Extraction
Machine type
Dust extractor
Order No.
Price €:
SAS 900 D
483.200
1,020.00
SAS 900 W
483.201
1,020.00
Technical data
Three-phase 400 V, 50 Hz 1.1 kW -
AC 230 V, 50 Hz - 1.1 kW
Suction power 450 m³/h
Speed 2800 rpm
Hose connection Ø 50 or Ø 100 mm
Width x Depth x Height 420 x 520 x 895 mm
Weight 50 kg
Accessories Order No Price €
Dust sack 371.102 59.00
Evacuatable machine stand for metal, wood and
plastic
Universally usable for double, belt and disc grinders,
brush, deburring and polishing machines.
Two connection pieces, optionally with suction hose Ø50
or Ø100 mm are available.
The solid construction guarantees high stability.
�
�
�
SAS 900 with optional Ø 50
mm
or Ø 100 mm suction hose.
SAS 900
Machine type
Mobile suction unit
Order No.
Price €:
HA 500
483.806
532.00
Technical data
Power consumption 1,200 Watts
Max. vacuum 210 mbar
Max. flow rate 3,180 rpm
Filter area 0.55 m²
Container capacity / filter sack
capacity
41 L / 24 L
Suction hose internal diameter Ø 35 mm
Length x Depth x Height 585 x 595 x 490
mm
Weight 11 kg
Accessories:
Suction nozzle set
Item No..:
483807
Easy filter cleaning
using the handle
Scope of delivery HA 500:
3 m suction hose with manifold, 1 filter
sack, universal sleeve, machine
connection hose (0.5m), connection
cable with connectors.
Mobile wet and dry dust class “M” industrial
extractor
Particularly suitable for use as mobile suction system
and for vacuuming hand tools such as our chop
saws.
Powerful and very low noise with 63 dB(A).
Flow rate check with visual and acoustic indicator.
Flow rate monitoring with overload protection for wet
suction with antistatic equipment.
Comfortable cleaning of the flat folded filter using remote
control on the the handle.
femi
Protects against hazardous to health or cancer-inducing
wood dusts in Groups 1 and 2. Tested according to GS-
HO-07 and TR GS 553.
�
�
�
�
�
�
HA 500
- 80 -
Flottstr. 25 • 56472 Großseifen • Tel. +49 (0)2661/40484 • Fax. +49 (0)2661/40573 • Email: info@kraeku.de • Website: www.kraeku.de
High performance extractors
Maschinenbau- und Dienstleistungs GmbH
Extraction
Machine type
Wet separator
Order No.
Price €:
NAS 900 D
483.205
1,680.00
NAS 900 W
483.205
1,680.00
Technical data
Three-phase 400 V, 50 Hz 1.1 kW -
AC 230 V, 50 Hz - 1.1 kW
Suction power 450 m³/h
Speed 2800 rpm
Suction hose Ø 50 mm / Ø 100 mm
Width x Depth x Height 580 x 670 x 870 mm
Weight 95 kg
See also page 9, K155
Evacuatable machine stand for metal and other
spark-forming materials
Universally usable for double, belt and disc grinders.
Connecting piece, with suction hose Ø 50 or Ø 100 mm
The solid construction ensures high stability.
�
�
�
Wet separator
Extractor fan for attachment to grinders
for flexible use in systems or machines
connecting piece, Ø 50 or Ø 100 mm
other sizes on request
�
�
�
Machine type
Extractor fan
Order No.
Price €:
ASL 300
371.101
510,00
Technical data
Motor power 1.1 kW
Speed 2800 rpm
Air flow 450 m³/h
Hose connection Ø 100mm
Length x Depth x Height 585 x 595 x 490 mm
Weight 21 kg
Standard equipment
1 m cable for connection to the main switch of the grinder,
dust bag 371.102
Accessories Order No Price €
Dust bag 371.102 62.00
ASL 300
- 81 -
Flottstr. 25 • 56472 Großseifen • Tel. +49 (0)2661/40484 • Fax. +49 (0)2661/40573 • Email: info@kraeku.de • Website: www.kraeku.de
Additional safety equipment
Maschinenbau- und Dienstleistungs GmbH
Safety
Additional safety equipment AD 250/310 Order No. Price €
Safety equipment for dressing and thickness planing
machine 250 S
Complete set with mounting plate consisting of:
Mounting plate 488.190, wooden block 488.220, bottom stop
488.230, plane blade extractor tool 488.240.
All additional parts are also available separately
488.200 345.00
Bottom stop 488.230 59.00
Plane blade extractor tool 488.240 52.00
Wooden block 488.220 18.00
Jointing ledge for AD 250 488.210 108.00
Jointing ledge for AD 310 488.510 115.00
Additional safety equipment KS 1011/2011 Order No. Price €
Safety equipment for circular saw KS 1011/2011
Complete set with mounting plate consisting of:
Mounting plate 480.110, wooden block 480.130, stake cut-off
device480.150, trimming carriage 480.160, prism loader
480.190, tenon cutter 490.550, adjustable cross stop 480.140.
All additional parts are available separately
467.720 508.00
Wooden block 480.130 36.00
Stake cut-off device 480.150 78.00
Trimming carriage 480.160 142.00
Prism loader 480.190 110.00
Tenon cutter 490.550 90.00
Adjustable cross stop 480.140 48.00
Additional safety equipment BS 400 Order No. Price €
Safety equipment for bandsaw BS 400 electronic
Complete set with mounting plate consisting of:
Mounting plate 491.660, mitre stop 490.040,
Push stick 480.135, wooden block 488.220, circle cutter
attachment 491.600, feeding device 491.670,
Load-securing wedge 491.680, prism loader 491.690.
All additional parts are also available separately
491.200 476.00
Mitre stop 490.040 115.00
Push stick 461.632 18.00
Wooden block 488.220 18.00
Longitudinal stop (in scope of delivery of the machine) 490.045 79.00
Circle cutter attachment 491.600 88.00
Feeding device 491.670 40.00
Load-securing wedge 491.680 30.00
Prism loader 491.690 30.00
- 82 -
Flottstr. 25 • 56472 Großseifen • Tel. +49 (0)2661/40484 • Fax. +49 (0)2661/40573 • Email: info@kraeku.de • Website: www.kraeku.de
Previous models
Previous modelsPrevious models
Maschinenbau- und Dienstleistungs GmbH
Accessories BTS 150 up to year 2001 Order No. Price €
Mitre stop, adjustable 2x45° for support table 463.650 124.00
Round parts grinding attachment, for support table 371.040 156.00
Connecting piece Ø 50/100 mm 371.045 234.00
Tools
Graphite support 150 x 890 mm 371.079 31.00
Abrasive belt for wood, 150 x 1775 mm, grain 60, 5 pcs. 371.011 35.00
Abrasive belt for wood, 150 x 1775 mm, grain 100, 5 pcs. 371.013 35.00
Abrasive belt for metal, 150 x 1775 mm, grain 60, 5 pcs. 371.021 58.00
Abrasive belt for metal, 150 x 1775 mm, grain 100, 5 pcs. 371.023 58.00
Adhesive coating Ø 255 mm 371.030 25.00
Grinding disc coatings for wood/metal Ø 255 mm, grain 60, 5 pcs. 371.033 28.00
Grinding disc coatings for wood/metal Ø 255 mm, grain 100,5pcs. 371.034 25.00
Grinding drum, Ø 80 mm. Length 120 mm
With 5 assorted abrasive coatings, bolt and spanner382.800 168.00
Grinding drum coatings for wood, Ø 80 mm, grain 60, 5 pcs. 382.801 45.00
Grinding drum coatings for wood, Ø 80 mm, grain 100, 5 pcs. 382.802 45.00
Wall holder for proper storage of the abrasive belts 371.860 92.00
Accessories for bandsaw BS 260 (discontinued
model)Order No. Price €
Machine stand, mobile 491.775 216.00
Mitre stop, with stop rail and stop 491.107 168.00
Circle cutter attachment, Ø 42-540 mm 491.108 175.00
Grinding attachment 491.109 115.00
Connection cable, 3 m long, alternating current 488.762 56.00
Tools
Bandsaw blade f wood, 1875 x 6 x 0.4 mm, 7 Z/“ VPE 2 pcs/pair 491.111 36.00
Bandsaw blade f wood, 1875 x 12 x 0.4 mm, 7 Z/“ VPE 2 pcs/pair 491.112 36.00
Bandsaw blade f wood, 1875 x 12 x 0.4 mm, 5 Z/“ VPE 2 pcs/pair 491.113 36.00
Bandsaw blade f fine cuts 1875 x 3 x 0.4 mm, 7 Z/“ VPE 2 pcs/pair 491.114 36.00
Bandsaw blade f metal & plastic,1875 x 6 x 0.4 mm, 12 Z/“ VPE 2
pcs/pair491.115 36.00
Bandsaw blade f metal & plastic,1875 x 12 x 0.4 mm, 12 Z/“ VPE
2 pcs/pair491.116 36.00
Band cutter for foam, 1875 x 10 x 0.5 mm, 4 Z/“, VPE 2 pcs/pair 491.117 44.00
Abrasive belt, 1875 x 15 mm, grain 60, package of 10 pcs 491.118 44.00
Abrasive belt, 1875 x 15 mm, grain 100, package of 10 pcs 491.119 44.00
Bandsaw BS 260
Belt grinder BTS 150
- 83 -
Flottstr. 25 • 56472 Großseifen • Tel. +49 (0)2661/40484 • Fax. +49 (0)2661/40573 • Email: info@kraeku.de • Website: www.kraeku.de
Services
Services
Special equipment
Special equipmentSpecial equipment
Maschinenbau- und Dienstleistungs GmbH
�
�
�
�
�
Customer service
Customer advisory
service
Training
Workshop setup
Machine instruction
Special equipment Order No. Price €
Three-phase motor with varying voltage (in the range
of 415 – 500 Volts)290.100 255.00
Three-phase motor with varying frequency (=60 Hz) 290.110 255.00
Foot switch as „Emergency Stop“ 290.320 265.00
Different colour (standard colour: gentian blue RAL
5010) single component paint290.200 95.00
Other special equipment on request
- 84 -
Flottstr. 25 • 56472 Großseifen • Tel. +49 (0)2661/40484 • Fax. +49 (0)2661/40573 • Email: info@kraeku.de • Website: www.kraeku.de
Extract from our conditions of sale
Conditions of saleConditions of sale
Maschinenbau- und Dienstleistungs GmbH
Region Up to 50
kg
Up to 100
kg
Up to 200
kg
Up to 300
kg
Up to 400
kg
Up to 550
kg
4/5 35.00 51.00 81.00 109.00 132.00 161.00
NL/B/LUX/2/3/6/7 40.00 63.00 104.00 144.00 184.00 219.00
DK/A/0/1/8/9 46.00 69.00 116.00 161.00 202.00 235.00
- Delivery ex-works,
- Seaworthy packing at extra cost
- One-way crates will be taken back if the costs are shared
- Colour gentian blue RAL 5010 or two-colour RAL 5010 / 7035 for Series K2003 (single
component paint) unless otherwise specified in the catalogue
-
- Machines comply with the EC standards
- Recommended retail prices in € plus 16% VAT
- Guarantee 24 months from delivery for single shift operation
including packaging
The KRÄKU company reserves the right to make design and dimension modifications
during the order processing time
Freight table
Guideline values plus VAT excluding transport insurance, P + P , as of 01/2006
Replacement parts and accessories up to 32.5 kg are despatched using a
parcel service.
- 85 -
Flottstr. 25 • 56472 Großseifen • Tel. +49 (0)2661/40484 • Fax. +49 (0)2661/40573 • Email: info@kraeku.de • Website: www.kraeku.de
Maschinenbau- und Dienstleistungs GmbH
Notes - 86 -
Flottstr. 25 • 56472 Großseifen • Tel. +49 (0)2661/40484 • Fax. +49 (0)2661/40573 • Email: info@kraeku.de • Website: www.kraeku.de
Training
Training
Maschinenbau- und Dienstleistungs GmbH
Our lathe school
As well as the general manufacture and sale of the company has also been making
lathes for more than 30 years.
We have also made it our objective and our mission to teach you the capabilities and the corresponding KNOW -
HOW in our own fully-equipped lathe school on our premises.
The company has been closely collaborating for several years with the local adult education centres (Bad
Marienberg, Betzdorf, Herdorf, Rennerod and Daaden) to make the courses attended with great interest possible for
everyone.
.
stadt@badmarienberg.de
www.bad-marienberg.de
KRÄKU KRÄKU
KRÄKU
machines, the
�
�
�
�
�
�
�
�
Our courses:
Contents of the courses are:
Our courses are available all year round and are also suitable for Mr Winfried Arybach is
available as a competent instructor.
The courses are held with groups of maximum 6 people, whereby each course participant has his own lathe and the
necessary working materials.
Machines and tools
Sharpening tools
Selection and preparation of the wood
Clamping possibilities
Machining and shaping of side grain (candle
holders, eggcups)
cross grain (plates, bowls)
Surface treatment
Shaping
Technical and artistic design
You also acquire extensive knowledge of lathe turning and experience how much pleasure making your own bowls,
beakers, jewellery boxes and similar items gives you.You will be astounded with the undreamed of creative possibilities the lathe gives you.
Bad Marienberg Tel.: 02661 - 63454
Betzdorf Tel.: 02743 - 2912021
Herdorf Tel.: 02744 - 922312
Rennerod Tel.: 02664 - 5453
Daaden Tel.: 02743 - 9290
Further courses are planned, e.g. On the subject of carpentry.
Mr Winfried Arzbach
Nordstr. 13
56242 Selters
Tel.: 02626 - 6020
Tourist- Information Bad Marienberg
Wilhelmstrasse 10
56470 Bad Marienberg
Tel.: 02661 - 7031
Fax: 02661 - 931747
e-mail:
people in wheelchairs.
Our courses are held in collaboration with the following adult education centres:
Please contact the course instructor at the following address for any questions about dates or enrolment:
You can be helped in your search for possible accommodation by:
- 87 -
Maschinenbau- und Dienstleistungs GmbH
Flottstraße 25
D-56472 Großseifen
www.kraeku.de
info@kraeku.de
Tel.: +49 26 61 / 4 04 84
Fax: +49 26 61 / 4 05 73
Your dealer:
“KRÄKU” AE 15.000 D
“KRÄKU” SB K 23
NEW
pillar dril
lKRÄKU’sNEW
pillar dril
lKRÄKU’s
“KRÄKU” POM 300
“KRÄKU” TBS 75
(Special solution)
“KRÄKU” TSM 450
(Special solution)
top related