media publications · 2 a k b l ep r f t 4 ik 8 h lz0 - t t va ok2 ik pubblication: iso 2012 date:...
Post on 19-Jul-2020
0 Views
Preview:
TRANSCRIPT
Media Publications
2012
2
a K b L eP r f T 4 0 K-F www YTIK 8 h LZ
t va oK2IK
Pubblication: ISO 2012
Date: June 2012
Title: Ein strahlender Messerekord in Köln
64 ISOLIERTECHNIK 2·2012 2·2012 ISOLIERTECHNIK 65
TITELGESCHICHTE
Ein strahlender Messerekord in Köln+ 18 % Besucher + 12 % Aussteller
Die 8. Internationale Isolierfach-messe erwies sich als blendende
Gelegenheit für gute Geschäftskon-takte und bescherte der Branche ei-nen optimistischen Blick in die Zu-kunft.
8.049 Besucher (2010: 6.813) infor-mierten sich an beiden Messetagen über das aktuelle Angebot der insge-samt 145 (2010: 130) Aussteller aus 13 Ländern. Besucherrekord! Aus-stellerrekord!
Von Jürgen Schmoldt
66 ISOLIERTECHNIK 2·2012 2·2012 ISOLIERTECHNIK 67
TITELGESCHICHTE
Der ISO AWARD 2012 und die Produktauszeichnungen
v.l.n.r: Michael Wiessner (St.-Gobain ISOVER), Frank Baur (L’ISOLANTE K-FLEX), „Chefjuror“ Dr. Martin Zeitler (FIW) überreichte die Auszeich-nungen, AWARD-Gewinner und somit 1. Sieger wurde Georg J. Kaimann (Kaimann), Markus Biland (MABI), Wolfram Adam (G+H Isolierung)
Mittwoch 9. Mai21:15 UhrISO Award 2012
3
a K b L eP r f T 4 0 K-F www YTIK 8 h LZ
t va oK2IKa K b L eP r f T 4
0 K-F www YTIK 8 h LZt va oK2
IK
Pubblication: Eiif
Date: June 2012
Title: Climate protection with rapid payback
Joint press release of EiiF and Ecofys
Climate protection with rapid payback Ecofys study identifies a large energy efficiency p otential of industrial insulationsin EU27
Geneva/Utrecht, 19 June 2012 – The today published report “Climate protection with rapid payback” by Ecofys and EiiF identifies a larg e energy and CO 2 savings potential of industrial insulation. In addition it demonstrat es that this potential is currently untapped despite being cost-effective to implement. In fact, European industry is losing energy and money every day, emitting tonnes of avoidable CO 2 emissions. “With just better maintenance and consistent insulat ing of industrial applications, about two thirds of the energy and emission saving potential could be tapped ,” says Kornelis Blok, director of Science at Ecofys. “ And since insulation investments will usually be paid back in less than one year, this is a great business opportunity .”
The EU Directive on Energy Efficiency aims at reducing the EU’s energy consumption by 20% by 2020. With current progress EU will achieve only half of these savings. Any Best Available Technique that can contribute to reduce EU’s energy consumption is therefore needed more than ever.
Industrial insulation is such a Best Available Technique. It can help European industry to reduce its total fuel consumption by 620 PJ and emissions by 49 Million tonnes of CO2.The report analyses that the saving potential exists across all regions, sectors, equipment and operating temperatures.
This total annual energy savings potential of 620 PJ is equivalent to the energy consumption of 10 million households;
The annual CO2 reductions potential of 49 Mt is equivalent to the CO2 emissions of 18 million cars.
But why is the potential of industrial insulation i n European industry so large? According to the study 10% or more of all equipment in industrial plants is not insulated or is covered with damaged insulation. Furthermore, the level of insulation applied is typically based on a minimum investment decision. These decisions have been based on requirements regarding the maximum surface temperature. This to avoid personal injuries, minimum process needs or based on generic maximum heat loss rates. Requirements like cost-effectiveness or maximum energy efficiency of the insulation system are often just not considered.
“In the past, when fuel prices were lower, energy efficient insulation would not have led to a large difference”, explains EiiF Foundation Director Andreas Gürtler. “But nowadays, besides the need to achieve the EU 20-20-20 goals, the price of energy is higher and is expected to grow even further. As a result we found an increasing gap between current and cost-effective insulation levels.”
If industry takes the opportunity and starts to tap the insulation potential this trend could be stopped. The first step would be to consequently insulate all not insulated parts and to repair damaged insulation. If however industry continues to ignore the large savings potential of industrial insulation, the gap between “current” and cost-effective insulation will further increase. Additional costs for CO2 emission allowances will even accelerate this trend.
For more information and to order the report please contact EiiF:
Andreas Gürtler Foundation Director Avenue du Mont-Blanc 33 1196 Gland, Switzerland Tel.: +41 22 99 500 70 info@eiif.org www.eiif.org
Mariëlle Vosbeek Press Office, Ecofys Kanaalweg 15-G 3526 KL Utrecht, The Netherlands Tel.: +31 30 662-3402 press@ecofys.com www.ecofys.com
Note to the editors European Industrial Insulation Foundation (EiiF) The European non-profit foundation EiiF is registered in Switzerland and has been set up to promote and establish the use of industrial insulation as a widely understood and accepted means of achieving sustainability. Since its foundation EiiF has established itself as a resource for industries that need to reduce CO2 emissions and save energy (www.eiif.org).
Ecofys – Experts in Energy Established in 1984 with the vision of achieving “sustainable energy for everyone”, Ecofys has become the leading expert in renewable energy, energy & carbon efficiency, energy systems & markets as well as energy & climate policies. The unique synergy between those areas of expertise is the key to its success. Ecofys creates smart, effective, practical and sustainable solutions for and with public and corporate clients all over the world. With offices in the Netherlands, Germany, the United Kingdom, China and the US, Ecofys employs over 250 experts dedicated to solving energy and climate challenges. (www.ecofys.com)
Please send a specimen copy of your publication to the above addresses.
Joint press release of EiiF and Ecofys
Climate protection with rapid payback Ecofys study identifies a large energy efficiency p otential of industrial insulationsin EU27
Geneva/Utrecht, 19 June 2012 – The today published report “Climate protection with rapid payback” by Ecofys and EiiF identifies a larg e energy and CO 2 savings potential of industrial insulation. In addition it demonstrat es that this potential is currently untapped despite being cost-effective to implement. In fact, European industry is losing energy and money every day, emitting tonnes of avoidable CO 2 emissions. “With just better maintenance and consistent insulat ing of industrial applications, about two thirds of the energy and emission saving potential could be tapped ,” says Kornelis Blok, director of Science at Ecofys. “ And since insulation investments will usually be paid back in less than one year, this is a great business opportunity .”
The EU Directive on Energy Efficiency aims at reducing the EU’s energy consumption by 20% by 2020. With current progress EU will achieve only half of these savings. Any Best Available Technique that can contribute to reduce EU’s energy consumption is therefore needed more than ever.
Industrial insulation is such a Best Available Technique. It can help European industry to reduce its total fuel consumption by 620 PJ and emissions by 49 Million tonnes of CO2.The report analyses that the saving potential exists across all regions, sectors, equipment and operating temperatures.
This total annual energy savings potential of 620 PJ is equivalent to the energy consumption of 10 million households;
The annual CO2 reductions potential of 49 Mt is equivalent to the CO2 emissions of 18 million cars.
But why is the potential of industrial insulation i n European industry so large? According to the study 10% or more of all equipment in industrial plants is not insulated or is covered with damaged insulation. Furthermore, the level of insulation applied is typically based on a minimum investment decision. These decisions have been based on requirements regarding the maximum surface temperature. This to avoid personal injuries, minimum process needs or based on generic maximum heat loss rates. Requirements like cost-effectiveness or maximum energy efficiency of the insulation system are often just not considered.
4
a K b L eP r f T 4 0 K-F www YTIK 8 h LZ
t va oK2IK
Pubblication: IPCM - International Paint & Coating Magazine
Date: December 2012
Title: Extreme production efficiency and minimal environmental impact in the coating of elastomeric insulators
5
a K b L eP r f T 4 0 K-F www YTIK 8 h LZ
t va oK2IKa K b L eP r f T 4
0 K-F www YTIK 8 h LZt va oK2
IK
Pubblication: IPCM - International Paint & Coating Magazine
Date: December 2012
Title: Extreme production efficiency and minimal environmental impact in the coating of elastomeric insulators
6
a K b L eP r f T 4 0 K-F www YTIK 8 h LZ
t va oK2IK
Pubblication: IPCM - International Paint & Coating Magazine
Date: December 2012
Title: Extreme production efficiency and minimal environmental impact in the coating of elastomeric insulators
7
a K b L eP r f T 4 0 K-F www YTIK 8 h LZ
t va oK2IKa K b L eP r f T 4
0 K-F www YTIK 8 h LZt va oK2
IK
Pubblication: IPCM - International Paint & Coating Magazine
Date: December 2012
Title: Extreme production efficiency and minimal environmental impact in the coating of elastomeric insulators
8
a K b L eP r f T 4 0 K-F www YTIK 8 h LZ
t va oK2IK
Pubblication: IPCM - International Paint & Coating Magazine
Date: December 2012
Title: Extreme production efficiency and minimal environmental impact in the coating of elastomeric insulators
9
a K b L eP r f T 4 0 K-F www YTIK 8 h LZ
t va oK2IKa K b L eP r f T 4
0 K-F www YTIK 8 h LZt va oK2
IK
Pubblication: IPCM - International Paint & Coating Magazine
Date: December 2012
Title: Extreme production efficiency and minimal environmental impact in the coating of elastomeric insulators
10
a K b L eP r f T 4 0 K-F www YTIK 8 h LZ
t va oK2IK
Pubblication: IPCM - International Paint & Coating Magazine
Date: December 2012
Title: Extreme production efficiency and minimal environmental impact in the coating of elastomeric insulators
11
a K b L eP r f T 4 0 K-F www YTIK 8 h LZ
t va oK2IKa K b L eP r f T 4
0 K-F www YTIK 8 h LZt va oK2
IK
Pubblication: IPCM - International Paint & Coating Magazine
Date: December 2012
Title: Extreme production efficiency and minimal environmental impact in the coating of elastomeric insulators
12
a K b L eP r f T 4 0 K-F www YTIK 8 h LZ
t va oK2IK
Pubblication: IPCM - International Paint & Coating Magazine
Date: December 2012
Title: Extreme production efficiency and minimal environmental impact in the coating of elastomeric insulators
13
a K b L eP r f T 4 0 K-F www YTIK 8 h LZ
t va oK2IKa K b L eP r f T 4
0 K-F www YTIK 8 h LZt va oK2
IK
Pubblication: Il Sole 24 Ore
Date: January 2012
Title: Da Simest finanziamenti alle imprese esportatrici
INT_MED
IA_0112
2012
top related