Download - ALLWEILER - weltweit präsent ALLPETRO
GB
/05.
07 –
Iden
t-N
r. 48
8 00
0
ALLWEILER - weltweit präsentALLWEILER - global presence
A Colfax Business Unit
ALLWEILER AGExzenterschneckenpumpen, Schlauchpumpen,Kreiskolbenpumpen und MazeratorenProgressing Cavity Pumps, Peristaltic Pumps,Rotary Lobe Pumps and Macerators
Postfach 20 01 2346223 BottropKirchhellener Ring 77–7946244 BottropGermanyTel. +49 (0)2045 966-60Fax +49 (0)2045 966-679E-mail: [email protected]: http://www.allweiler.com
Die Anschriften der ALLWEILER Vertretungen weltweit finden Sie unter http://www.allweiler.comThe current addresses of ALLWEILER representatives can be found at http://www.allweiler.com
ALLWEILER AGPostfach 11 4078301 Radolfzell • GermanyTel. +49 (0)7732 86-0Fax +49 (0)7732 86-436E-mail: [email protected]: http://www.allweiler.com
ALLWEILER AGSchraubenspindelpumpen, Kreiselpumpen,Zahnradpumpen, Propellerpumpen und AnlagenScrew Pumps, Centrifugal Pumps, Gear Pumps, Propeller Pumps and Systems
Postfach 11 4078301 RadolfzellAllweilerstraße 178315 RadolfzellGermanyTel. +49 (0)7732 86-0Fax +49 (0)7732 86-436E-mail: [email protected]: http://www.allweiler.com
Werke Plants in Germany
in Deutschland
A Colfax Business Unit
®ALLPETRO
®ALLPETRO :More than 100 Years of ExperienceTwo- and three-screw pumps with uniform, high efficiency across a wide viscosity range
,Screw pumps for crude oil, bitumen, diesel oil and other crude oil products and mixtures
,Specific versions are optimised for high discharge pressure or a large flow volume
,Positive displacement pumps for contaminated or gaseous oils
Use positive displacement pumps to move virtually all types of crude oil and their derivatives
from the drill hole to the refinery. Then choose ALLWEILER with experience in centrifugal pumps,
peristaltic pumps and propeller pumps to cover specific pumping tasks inside the refinery and
during transport. Finally, progressing cavity, gear, and rotary lobe pumps take care of all the
pumping requirements in your plant's peripheral installations. That is how ALLWEILER provides
you with everything from a single source. ALLWEILER can even deliver complete, ready-to-use
pump skids or modules that are ready for installation.
Product variety combined with global service and more than 100 years experience building
pumps for moving oil is your guarantee of very low life cycle costs, long maintenance cycles, and
rapid on-site service, no matter where you are working.
ALLPETRO pumps are designed specifically to reliably move crude oil and related products of
virtually any quality:
Three-spindle “single end” pumps are ideal for smaller and medium flow volumes. With these
pumps you can cover a wide pressure range of up to 160 bar. If you need less pressure but larger
flows, then “double end” pumps will be the right choice. Two-spindle screw pumps are
particularly insensitive to contamination such as sand, rust, paraffin and salt or gaseous oils.
Additionally, their viscosity range is so broad they can even pump water or similarly thin oil
products just as reliably and efficiently as thicker materials like crude oil.
Redundant double units ensure virtually 100-percent availability and make maintenance and
service easier.
uCrude oils (light, medium and heavy oils; from API below 10 to API above 20; even
contaminated; mineral and organic)
uDiesel oils, petroleum, asphalt, bitumen
uBenzenes, benzines of all types
uLiquid sulfur
uGasoline, kerosene, naphthalene, wax, soaps
uAcidic/saline oils
ALLWEILER is your one-stop source for all pumps and complete service related to moving oil.
®ALLPETRO : Optimised for Moving Crude Oilto the Refinery and During Production
PR
OV
EN
u2 ®ALLPETRO : Crude Oil Pumps u3
Maximum performance data of ALLWEILER ALLPETRO screw pumps*
Three-spindle Two-spindle3Q 200 1.300 m /h
p 160 100 bard
2ν 3 up to 750 0,6 up to 100.000 mm /sOt 280 400 C
* All performance data listed here and in the following tables apply to 50-Hz operation.
Only ALLWEILERcan deliver pumps for moving and processing crude oil and pumps for every secondary application. These include pumps for:
uWater and Wastewater
uHydraulics and Building Industry
uPower Generation
uProcess Technology
uHeat Transfer
API compliant:Each ALLPETRO pump meets API 676.
ALLPETRO: The Right Pumps for All Types of Pumping and ProcessingALLWEILER oil pumps come in many different versions that are perfectly adap table to their intended usage.
CO
MP
LETE
u4
ALLPETRO pumps are also available as modules ready for immediate use.
You can expect the following benefits from using ALLPETRO screw pumps:
uEasy transfer of contaminated crude oil (with
water, sand, salt etc.)
uA wide range of pump pressures and flows
uA uniform, precisely defined flow rate, even with
changing viscosity, fluctuating pressure
conditions, varying liquids and dynamic force
effects
uPrecise movement and uniform metering of
mixture components
uHigh efficiency with all oil derivatives - no cost
and no maintenance for additional installations
such as heating
uLow NPSH values makes these pumps flexible
enough to be installed above the suction level
without adaptation or performance limitations,
making possible: longer suction lines, complete
tank stripping, and very flexible installation
uSelf-priming with no need to fill up the pumps
before starting or after changing liquids
uHigh reliability even when the liquid has air
inclusions, gas bubbles, and a high vapor
pressure
uDirect-drive synchronous motors provide for
complete drainage without altering speed
uLow shearing forces and therefore low swirling
of the liquid provide for simple and economical
separation of oil and water components
uGlobal on-site service and support: We
guarantee shipment of replacement parts ®(QuickServe ) and deployment of service
®technicians (PumpService ) within defined
reaction times
ALLWEILER AG is prepared to meet your exact
requirements with specific products and services. It
matters little whether you are a planner, builder or refinery
operator. You will always receive comprehensive
consultation and the best possible solution for your
pumping tasks. ALLPETRO pumps are designed for the
following applications:
uAs collection pumps in oil fields
uAs discharge and loading pumps
uAs transfer pumps in pipelines across short and long
distances, even where there are great differences in
height.
uAs distribution pumps in tank farms
uAs feed pumps in refineries
®ALLPETRO : Crude Oil Pumps u5
Intended applications for ALLPETRO two- and three-spindle screw pumps
DownstreamUpstream Midstream
ALLWEILER Pumps
Markets andProducts
Long DistanceTransportation
Production Operations
Field Processing
Field Pipeline Gathering
Storage
PetrochemicalManufacturing
Refining
ALLPETRO Three-Spindle Pumps: Universal, Insensitive and EconomicalALLPETRO three-spindle pumps are the best solution for many specific requirements related to pumping and processing.
UN
IVE
RSA
L
u6
Tested quality, extremely maintenance friendly, and the lowest life cycle costs.
®ALLPETRO : Crude Oil Pumps u7
The common trait of all ALLPETRO three-spindle screw pumps is their universality. These
pumps are just as reliable as they are economical when moving crude oil and derivatives.
These pumps can handle nearly all of your applications thanks to:
These pumps are the most economical solution available, especially at discharge pressures of
greater than 10 bar.
Additional special features:
Gas or air in the pumped liquid will not affect the performance of ALLPETRO pumps. They
require neither ventilation nor special equipment for such liquids.
ALLPETRO pumps can also move liquids with viscosities above 150 cSt/700 SSU without
sacrificing flow volume. And they do not need heating or greater drive power to do it.
ALLPETRO pumps work uniformly, even at high temperatures, which is essential when
moving materials like liquid sulfur.
ua viscosity range of less than one to one-million cSt,
uthe ability to achieve high pressures (maximum 350 bar) and
utheir high tolerance for flow volumes of 1 to 12.000 liters/minute.
uOil containing gas and/or air
uViscous liquid
uHigh temperatures
cSt
After decades of targeted design optimisations, all ALLPETRO pumps exhibit the following
performance traits:
High speeds Smaller, compact and money-saving pumps; no gearing necessary.
High suction capacity Saves money on piping, flexible installation, insensitive to changes in operational conditions, easy to bring into operation.
Bearing permanently lubed Saves money during installation and maintenance, higher reliability, no cooling necessary.
Very hard materials Resists abrasive parts, lower maintenance times and costs, less expense for downstream filters (omega test value 1.0005).
All pumps are tested before leaving the plant. The plants are ISO 9000:2000 and ISO 16 949 certified.
Your benefits:
uFlexible installation
Rotating suction branch,
installation in tank or externally
with base plate or flange,
horizontal or vertical.
Your benefits:
uMaintenance friendly
Exchangeable housing unit, only three
moving parts, rapid and simple
maintenance without special tools and
on-site specialists; complete repair kits,
immediate restarting.
Your benefits:
uSafe
Exchangeable insert unit
prevents housing wear.
Your benefits:
uLong-term reliability
External ball bearing
eliminates wear and
disturbances caused by
abrasive components in the
liquid.
Your benefits:
uDurable and always ready
Relieved mechanical seal
provides for rapid maintenance,
low maintenance costs and long
service life of shaft seal.
Your benefits:
uLong service life
Hydraulically relieved bearing
minimizes stress without influence of
bending forces.
Your benefits:
uDurable with a long
service life
Hardened spindle surface
insensitive against abrasive
particles.
Your benefits:
uDurable and always ready
Relieved mechanical seal
provides for rapid maintenance,
low maintenance costs and long
service life of shaft seal.
ALLPETRO Two-Spindle Pumps: For Complex LiquidsALLPETRO two-spindle pumps are suitable for dry running and are capableof pumping even highly contaminated liquids or liquids mixed with gaswithout limitation.
u8®ALLPETRO : Crude Oil Pumps u9
Your benefits:
uHigh efficiency
Flow-optimised profiles and spindle
flanks with minimal slip.
Your benefits:
uFlexibility
Low suction speed permits
safe pumping even with low
inlet pressure.
Your benefits:
uLong-term reliability
External ball bearing eliminates
wear and disturbances caused
by abrasive components in the
pumped iquid.
SPE
CIF
IC
ALLWEILER provides pumps for all pumping tasks in upstream, midstream, and downstream. In addition, the uniquely extensive product range of ALLWEILER includes all pumps for secondary units and peripheral systems.
ALLWEILER Pumps:One Source for All Applications
Application Pump type
Scre
w P
ump
s,
thre
e-sp
ind
le
Scre
w P
ump
s,
two-
spin
dle
Cen
trifu
gal
Pum
ps,
wat
er
Cen
trifu
gal
Pum
ps,
heat
tra
nsfe
r
Cen
trifu
gal
Pum
ps,
chem
istr
y
Prog
ress
ing
Cav
ity
Pum
ps
Crude oil gathering pump
Pipeline pump
Pressure-elevating pump
Discharge/transfer pump
General service pump
Drug reducing agent pump
Water and condensate pump
Treatment pump
Oily sludge pump
Process pump
Vacuum residue charge/Vacuum distillation pump
Asphaltene stripper pump
Servo pump
Turbo expander pump
Offshore mooring pump
Burner feed pump
Slope oil pump
Drain sump pump
Sand slurry pump
Ballast water pump
Fire fighting pump
Injection pump
Sewage pump
Seperator feed pump
Visbreaking pump
Mud pump
Your benefits:
uDurable and always ready
Oil-lubed and hardened
transmission gears with
external bearings reliably
protected against
contamination.
The spindles in ALLPETRO two-spindle screw pumps run without metal contact; therefore, oil that contains gas or water
components, slightly volatile oils and mixed-in sand or other similar contamination, will affect neither the pump's service
life nor its pumping characteristics. As a result, the pumps can run dry for a short time without incurring damage. These
pump units are capable of resolving even the most difficult pumping tasks:
uPumped liquids at high temperatures (as in asphalt plants)
uIn plants that need low NPSH values for pumped liquids with very high viscosity
uIn plants where liquids with varying properties must be pumped with the same pumps (like pumped process liquids
and plant cleaning liquids)
Your benefits:
uLong service life
Opposing flows permit
complete hydraulic relief
minimising stress on the
bearing.
u10
ALLWEILER - the right pump forevery application
Founded in 1860, ALLWEILER AG is the oldest German pump manufacturer and the European market and technology leader for centrifugal, propeller, screw, progressing cavity, macerator, gear, and peristaltic pumps. ALLWEILER AG is represented by distributors and salescompanies in European countries as well as in Egypt and South Africa. Around the world, the company has approximately 100 subsidiaries and partner companies.
ALLWEILER pumps are designed to meet the requirements in specific fields of use. These include especially marine and offshore, water and wastewater, power generation, process technology and chemistry, food and pharmaceutical, building industry, machine tool, pulp and paper, heat transfer, bioenergy and oil and gas.
Our experience since 1860 is your guarantee. As a member of the Colfax Corp., we benefit from international know-how in development, design and production. By choosing ALLWEILER, the customer chooses not only a product of high quality and value, but also a manufacturer that offers competent, rapid and cooperation consultation.
Our global sales and service network ensures competent partners around the clock.
Contact us soon.
+49 (0)7732 86-0
+49 (0)7732 86-436
Phone
Fax
INFO
-FA
X
®ALLPETRO Information Request Form
Address
.........................................................................................................................................................Company
.........................................................................................................................................................Industry
.........................................................................................................................................................Contact person
.........................................................................................................................................................Street
.........................................................................................................................................................Postal code/City/Country
.........................................................................................................................................................Telephone
.........................................................................................................................................................Fax
Please make a copy of this form and fax it to:
ALLWEILER AGD-78315 Radolfzell
Fax +49 (0)7732 86-436
Phone +49 (0)7732 86-0
E-mail [email protected]
® ® £ALLPETRO Two-Spindle Screw £ ALLPETRO Three-Spindle Screw
£Centrifugal Pumps, Water £ Centrifugal Pumps, Chemistry
£Centrifugal Pumps, Heat Transfer £ Progressing Cavity Pumps
£Entire product range of ALLWEILER AG
Or simply call or send us an E-mail. We look forward to hearing from you.
Please provide me free information at no obligation about (please check):
®ALLPETRO : Crude Oil Pumps u11