audio rhd aim 000481-1
Post on 08-Nov-2014
17 Views
Preview:
TRANSCRIPT
YarisAUDIORHD installation instructions
Model year: 2005
Vehicle code: **P90R-****KW
Part number: • CD-Changer: 08601-00911• Subwoofer: 08691-00834
Manual ref. no: AIM 000 481-01
Yaris (RHD) - 202-07
Yaris AUDIO
Rev. Nr.Rev. No
No. version
DatumDateDate
SeitePagePage
AbbildungPictureImage
AktualisierungUpdate
Mise à jour
NeuNew
Nouveau
Gelöschte SchritteDeleted steps
Etapes supprimées
1 02-07 5Application
ChartApplication
Chart Europe
1 02-07 6Application
ChartApplicationChart Japan
X
1 02-07 9 Step 7 - 8 X
1 02-07 12 Step 8 - 9 X
1 02-07 13 Step 10 - 11 X
1 02-07 14 Step 12 - 13 X
Revision Record
Yaris (RHD) - 3 02-07
Yaris AUDIO
PRECAUTIONS
PLEASE READ THOROUGHLY THESE PRECAUTIONS BEFORE THE INSTALLATION .
• Do not pinch the rear wiring or harness in the tightened part.
• Be sure to disconnect the nega-tive (-) lead from the battery ter-minals.
• When passing the wires throughthe dashboard or other panels,use a grommet to ensure water-proofing.
• Protect the wiring with tapewhen it is passed through a hole.
• When disconnecting the con-nectors, be sure to grip the con-nector body. Do not tug on thewiring.
• Do not forcibly pull any carwiring harness. Rough tuggingmay result in opened connec-tions, or a broken wire or har-ness.
• Confirm that lamps, horn, wiperand other car accessories operatenormally.
• Protect your car with fendercovers, seat and so on.
• Use the correct tool whentightening bolts or nuts.
• Before drilling a hole, checkthat the rear of the mount-ing wall is clear.
• Be sure to firmly tight-en connectors and ter-minals.
• Before connecting thepower wiring to the battery,check the wiring con-nections, harness, etc. to seethat they are properlysecured.
• Check body and trim near area of installation to be certain no dirt or scratches resulted from the installa-tion.
waterproof - O.K. !!
Taping
Grommet
Insert completely
Stop it !
Yaris (RHD) - 402-07
Yaris AUDIO
Revision Record ................................................................................................................................ 2
Precautions ........................................................................................................................................ 3
Application Chart Europe production ............................................................................................ 5
Application Chart Japan production ................................................................................................ 6
AUDIO Installation Instructions
• Vehicle Disassembly .................................................................................................................. 7
• CD-Changer Installation ..........................................................................................................10
• Subwoofer Installation ..............................................................................................................15
TABLE OF CONTENTS
Yaris (RHD) - 5 02-07
Yaris AUDIO
APPLICATION CHART EUROPE PRODUCTION
Yaris (RHD) - 602-07
Yaris AUDIO
APPLICATION CHART JAPAN PRODUCTION
Yaris (RHD) - 7 02-07
Yaris AUDIO
VEHICLE DISASSEMBLY
2. Remove the center cluster panel (L) and (R) .
: Clip (6x)
: Hook (8x)
5
5
Fig. 1
1. Put protective tape on the shaded areas.
Be sure to remove the parts carefully so you do not damage the panels.
CAUTION
3.
a) Put protective tape on the shaded areas.
b) Remove the meter cluster panel .
: Clip (5x)
: Hook (4x)
8
Fig. 3
8
Be sure to remove the parts carefully so you do not damage the panels.
CAUTION
Fig. 2
5
Yaris (RHD) - 802-07
Yaris AUDIO
5. Remove the scuff plate and the cowlside trim on the driver’s side.
: Clip (1x) (Cowl side trim)
: Hook (1x) (Cowl side trim)
: Clip (2x) (Scuff plate)
: Hook (2x) (Scuff plate)
13
10
6. Remove the driver’s seat .
: Bolt (4x)108
15
Fig. 6
15 108
Fasten the bolts with specified torque(37 Nm) when reassembling.
CAUTION
4. Remove the audio unit .
: Clip (4x)
: Screw (4x)100
9
Fig. 4
100
9
FOR EUROPE PRODUCTION
Fig. 5
10
13
Yaris (RHD) - 9 02-07
Yaris AUDIO
7. Remove the scuff plate and the cowlside trim on the passenger’s side.
: Clip (1x) (Cowl side trim)
: Hook (1x) (Cowl side trim)
: Clip (2x) (Scuff plate)
: Hook (2x) (Scuff plate)
13
10
8. Remove the passenger’s seat .
: Bolt (4x)108
15
Fig. 8
15108
Fasten the bolts with specified torque(37 Nm) when reassembling.
CAUTION
FOR JAPAN PRODUCTION
Fig. 7
10
13
Yaris (RHD) - 1002-07
Yaris AUDIO
1. Cut one tape into ten pieces andanother tape into six as shown in thepicture.
• : Component part of CD changer kit15
15
Fig. 1
2.
a) Route the changer wire by using thetape pieces.
b) Connect the changer wire harness tothe audio unit by using the AVC-LANconversion wire 08695-000370.
9
28
15
28
Fig. 2
15
28
CD-CHANGER INSTALLATION
9
6x
10x
08695-00370FOR EUROPE PRODUCTION
3. Unscrew and pull forward to remove thefuel lid opener .
: Screw (1x)102
14
Fig. 8
14
102
Yaris (RHD) - 11 02-07
Yaris AUDIO
09-05
4. Cut the floor carpet.
50mm
20mm
50mm
170mm
20m
m
Fig. 4
5. Route the changer wire . Bundleexcess wire and tape with the large tape as shown by going through thehole of the cross member near the door.
15
28
6. Replace the carpet and pull through thechanger wire . Install the bracket to the floor.
: Bolt (2x)
• : Component part of audio mounting kit PZ425-B0220-60103
103
1228
Fig. 5
28
Excess wire
15
Hole
Fig. 6
103
12
28
Yaris (RHD) - 1202-07
Yaris AUDIO
7.
a) Install the changer unit to the brack-et .
b) Connect the changer wire to thechanger unit .
: Screw (4x)
• : Component part of CD changer kit104
104
18
28
12
18
FOR JAPAN PRODUCTION
8.
a) Turn the floor carpet with felt.
b) Route and tape the subwoofer wire with tapes .15
28
9. Cut the carpet with felt as shown in the illustration.
270mm
160mm
60mm
80mm80
Fig. 9
Fig. 7
104
12
18
28
Fig. 8
15
28
Excess wireFloor carpet
Yaris (RHD) - 13 02-07
Yaris AUDIO
Fig. 10
17 131 17
13
15
1
17
10. Attach the spacers and the tapes to the base bracket .
: Screw (M5x10) (4x): Spacer with nut (4x): Tape (2x)1
17
15
13
117
11. Attach the base bracket to the floorand fold back the cut parts of the carpet
.14
3
Fig. 11
14
3
Yaris (RHD) - 1402-07
Yaris AUDIO
Re-assembly.Replace all removed parts and panels. Be sure all panel clips and connectors are proper-ly engaged.
12. Install the side brackets to the chang-er unit .
: Side bracket (2x)
: Flat head screw (M5x8) (4x)103
6
7
6
Fig. 12
7
Hole position on theleft side (�)
Hole position on theright side (�)
6
6
103
Screw
13. Install the changer unit .
a) Connect the changer wire to thechanger unit .
b) Then install the changer unit to thebase bracket .
: Screw (M5x10) (2x)104
3
7
7
2
7
Fig. 13
3
2
104
7
14
3
Yaris (RHD) - 15 02-07
Yaris AUDIO
3.
a) Put protective tape on the shaded areas.
b) Remove the meter cluster panel .
: Clip (5x)
: Hook (4x)
8
Fig. 3
8
Be sure to remove the parts carefully so you do not damage the panels.
CAUTION
SUBWOOFER INSTALLATION
2. Remove the center cluster panel (L) and (R)
: Clip (6x)
: Hook (8x)
5
5
1. Put protective tape on the shaded areas.
Be sure to remove the parts carefully so you do not damage the panels.
CAUTION
Fig. 1
Fig. 2
5
Yaris (RHD) - 1602-07
Yaris AUDIO
4. Remove the audio unit .
: Clip (4x)
: Screw (4x)100
9
Fig. 4
100
9
5. Remove the scuff plate and the cowlside trim on the passenger’s side.
: Clip (1x) (Cowl side trim)
: Hook (1x) (Cowl side trim)
: Clip (2x) (Scuff plate)
: Hook (2x) (Scuff plate)
13
10
6. Remove the passenger’s seat .
: Bolt (4x)108
15
Fig. 6
15108
Fasten the bolts with specified torque(37 Nm) when reassembling.
CAUTION
Fig. 5
10
13
Yaris (RHD) - 17 02-07
Yaris AUDIO
7. Fit brackets to the subwoofer .
: Screw with washer (4x)
• : Component part of audio mountingkit PZ425-B0221-60
• : Component part of subwoofer kit27
26
105
242726
Fig. 7
8. Cut the carpet with felt as shown in the illustration.
130mm
130mm
100mm
100
60mm
60mm20mm
60mm
Fig. 8
10526
24
27
9. Cut one tape in ten pieces.
• : Component part of subwoofer kit15
15
Fig. 9
15
10x
Yaris (RHD) - 1802-07
Yaris AUDIO
10.
a) Turn the floor carpet with felt.
b) Route and tape the subwoofer wire with tapes .15
28
11. Connect the subwoofer wire harness to the 10P audio connector of the vehi-cle wire harness and to the audio unit
.9
28
12. Before installing the subwoofer adjust the HIGH CUT and GAIN to thecorrect position.
24
HIGH CUT
HIGH CUT GAIN
GAIN
Fig. 12
24
Fig. 10
15
28
Excess wireFloor carpet
Fig. 11
10P Audio connector928
Yaris (RHD) - 19 02-07
Yaris AUDIO
13.
a) Replace the floor carpet with felt.
b) Fit the base bracket to the floor using
adhesive tape .
• : Component part of audio mountingkit PZ425-B0221-60
25
25
26
Fig. 13
25
2824
26
14. Mount the subwoofer as shown inthe illustration and connect the sub-woofer wire to the subwoofer .2428
24
32mm
36mm
100mm
55mm
Fig. 14
24
28
Re-assembly.Replace all removed parts and panels. Be sure all panel clips and connectors are proper-ly engaged.
Rattling noises might be heard whenthere’s something in the tray under theseat.
NOTE
GENUINE PARTS
top related